Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB Super-easy operation with intuitive LED display Continuity check and intermittent contact detection Phantom-power and ground-shield check Test-tone generator: 1 kHz or 440 Hz at +4 dBu, […]
Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
Super-easy operation with intuitive LED display
Continuity check and intermittent contact detection
Phantom-power and ground-shield check
Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
Operates with 2 AA size batteries (not included)
Designed and engineered in Germany
User's ManualA stage is only as good as its cables — and the AHMCT 8 sets the record straight.
The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers — both in the workshop and on stage.
The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands.
The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations.
Solid metal housing
Powered by a 9-V block battery
Tests Speakon, XLR, jack/TRS, cinch and midi/DIN cables
Additional continuity tester with measuring probes
Optical display and buzzer
Product type Test Equipment
Connectors 6.3 mm Jack , Banana plug , DIN 5-pin , RCA , Speakon, 4-pin , XLR
Controls down , Power On/Off , up , volume
Indicators battery status , LED chain
Operating voltage 9 V block
Acoustic continuity test yes
Test cable yes
Cabinet material sheet steel
Cabinet surface powder coated
Width 105 mm
Depth 145 mm
Weight 0,64 kg
This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.
With the PAN05, two microphone signals can be mixed down to one. Since decoupling occurs via the balanced resistor network, the PAN05 also lets phantom power "pass through“, useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser mics should be avoided. Best results will be achieved using two identical mics.
SPECIFICATIONS:
Input: 2 x XLR/f balanced
Nominal impedance: 200 Ω
Output 1 x XLR/m balanced
Load impedance >200 Ω
Symmetrically decoupled through resistors
Total ohmic value: 200 ohms
Typical attenuation: 6 dB
Housing: metal casing 110 x 73 x 42 mm
Θερμόμετρο υπερύθρων χειρός OEM Lasergrip GM400
Μοναδική συσκευή μέτρησης της θερμοκρασίας Lasergrip GM400
Μετρά την θερμοκρασία των υλικών χωρίς επαφή από απόσταση με υπέρυθρες ακτίνες.
Με ευέλικτο σχεδιασμό λαβής και γρήγορη μέτρηση μετρά θερμοκρασίες στην επιφάνεια, χωρίς να αγγίξετε.
Με φωτιζόμενη οθόνη LCD και μεγάλα ψηφία για ορατότητα περιοχές σε χαμηλό φωτισμό.
Μεγάλη ακρίβεια με λόγο 12: 1
Το GM400 μπορεί να μετρησεί με ακρίβεια τους στόχους σε μεγαλύτερες αποστάσεις σε σχέση με τα περισσότερα άλλα IR θερμόμετρα.
Κατάλληλο για εκτέλεση έργων συντήρησης, τις εγκαταστάσεις θέρμανσης και ψύξης, τα συνεργεία αυτοκινήτων, τα πρατήρια βενζίνης, τις επισκευές στο σπίτι, την κατασκευή εξαερισμών, τις επιθεώρησεις ηλεκτρολογικών και πολλά άλλα.
Δεν προτείνεται για μέτρηση θερμοκρασίας σώματος .
Μετρά σε βαθμούς Κελσίου ή Φαρενάιτ, μετρήστε όλο το από -50 ~ 400 C / -58 ~ 752 F
Εξοικονόμηση ενέργειας με λειτουργία αυτόματης απενεργοποίησης για να παρατείνει τη διάρκεια ζωής της μπαταρίας, διαθέτει ένδειξη χαμηλής μπαταρίας.
Τεχνικά Χαρακτηριστικά:
Δυνατότητα επιλογής βαθμών ºC / ºF
Λειτουργία Hold (κράτησης) δεδομένων
Στόχευση με Laser
Επιλογή ON / OFF
Αυτόματη απενεργοποίηση όταν δεν είναι σε χρήση
Τροφοδοσία: Με μπαταρίες
Θερμοκρασία λειτουργίας: -50 ° C ~ 400 º C / -58 ~ 752 º F
Ακρίβεια: ± 1,5% ή ± 1,5 º C
Επαναληψιμότητα: ± 1% ή ± 1 º C
Αναλογία σημείων απόστασης: 12:1
Εκπομπή: 0,95 προκαθορισμένες
Ανάλυση: 0.1 ºC / ºF
Χρόνος απόκρισης: 500ms
Μήκος κύματος: 8-14μm
Μέγεθος: 148 * 70 * 30 χιλιοστά
CE,ROHS
Tester καλωδιώσεων με αυτόματη ένδειξη οχτώ σημείων, σασσί δύο τμημάτων για έλεγχο δομημένης καλωδίωσης γεννήτρια θορύβου, tester με beeper και led ενδεικτικό με την χρήση banana connectors, ελέγχει DMX (5-pin), BNC RCA, XLR (αρσενικό /θηλυκό) 3 επαφών, MIDI (5-pin DIN), speakon 4 επαφών, 1/4? (6.3mm) TRS/TS, RJ45, 1/8" (3.5mm) TRS/TS.
The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.
Features
Tests up to 8-pin cables
2 piece chassis for testing installed cables
Test Tone Generator
Allows connection between different format connectors with ease
ʽBananaʼ connector continuity tester with beeper and LED indicator
Super-rugged construction for durability and longer life
(2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
(2) BNC connectors for testing of 2 pin->to pin connections
(2) RCA Phono connectors for testing of 2 pin->to pin connections
(2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
(2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
(2) Speaker Twist connectors for testing of 4 pin->to pin connections
(2) Banana connectors for testing of 1 pin->to pin connections
(2) 1/4” (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections
(2) RJ45 connectors for testing of 8P8C modular connections
(2) 1/8” (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections
Specifications
Power Requirements
(2) 9V batteries, one per side (Batteries not included)
Dimensions
3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.