| Content | Converts to DC 9 V for use with virtually all stomp boxes and effects pedals
Typical DC-type 2.2 mm plug with negative tip and positive sleeve
Provides a generous 100 mA current to power even digital products
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Use our new general purpose DC 9 V power adapter PSU-SB to power virtually all your guitar or bass guitar stomp boxes and effects pedals.
This adapter provides a generous 100 mA current to power even digital products. For connection, it features a typical DC-type 2.2 mm plug with negative tip and positive sleeve.
This universal power supply gives you ultimate power for your most demanding gigs
Features: Converts to DC 9 V for use with virtually all stomp boxes and effects pedals Typical DC-type 2.2 mm plug with negative tip and positive sleeve Provides a generous 100 mA current to power even digital products suitable for: CO600, UW300, XD300, CL9, OD400, SM400, UV300 und UZ400
- Power Adapter
- 100-240V AC, 50-60Hz
- 9V DC
- 100mA
- Sleeve: Positive, Tip: Negative
- Behringer Guitar Pedals
- 2.2mm Barrel
Please note this is a European power supply. |
Universal Effects Pedal Floor Board with Integrated Power Supply
Ultra-compact and lightweight pedal board for transporting up to 12 effects pedals
Generous 1.7 A power adapter included for powering more than 12 devices*—includes all cabling
Ultra-rigid plastic design withstands even heavy impact
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Love your pedal chain? Rather than tossing your effects and their individual power adapters into a duffel bag after a gig, keep them safe—and ready to rock at a moment's notice—with the PB1000.
It's all about connections
This pedal board makes hooking up 12 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5“, the snug foam padding can be cut to accommodate pedals of varying shapes). The PB1000 includes ¼" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 12 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power.
The Ins and Outs
Connect your guitar, bass or keyboard to the single ¼" input in the upper right corner of the board. A pair of ¼" FROM EFFECTS jacks in the upper left corner allow you to connect stereo effects, and two ¼" OUTPUT TO AMP jacks send a left and right stereo signal to up to two amps. When it is time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB1000 and slide the locking latches back into place. The heavy-impact plastic casing will protect your pedals from the rigors of the road.
Value
You have invested considerable time and money into your effects chain. Keep it safe and sounding great with the PB1000. Check it out at your nearest BEHRINGER dealer.
User's Manual
|
Βαλίτσα μεταφοράς και Pedal Board, ξύλινη ανθεκτική κατασκευή με αλουμινένιες γωνίες, ενισχυμένο εσωτερικό από αφρό για προστασία του εξοπλισμού μας, δερμάτινη χειρολαβή, μεγάλος αποθηκευτικός χώρος στη βάση, Pedalboard που μπορει να χρησιμοποιηθεί μέσα στη θήκη ή στο πάτωμα, ελαφριά κατασκευή από ανθεκτικό αλουμίνιο, low profile σχέδιο, βάσεις / πόδια από σκληρό πλαστικό που δεν επιτρέπει τη μετακίνηση του pedalboard, διαστάσεις 56 x 31,6 εκ.
Είδος:
| User\'s manual
Palmer MI PWT 12 MK 2
Universal 12-Outlet Pedalboard Power Supply
- Fully regulated universal pedalboard power supply
- 12 standard centre negative outlets with 2,000 mA output total
- 8 x 9 V outlets (300 mA each)
- 4 variable voltage outlets 6 to 18 V (500 mA each)
- Short circuit and overload protection for each outlet
- DC cables and mains adapter included
The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 isolated 9 V DC, centre-negative female pin-connector outputs. Four of the outputs feature adjustable voltage from 6 to 18 volts. The variable outputs enable the simulation of voltage drop or \'battery sag\' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.
Product type
Power Supplies
Input voltage
100 - 250 V
Outputs
12
Output connectors
2.1 x 5.5 mm
Output voltage
12 V , 18 V , 9 V
Max. output current
2000 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
fault , Power
Controls
Output voltage selector
Width
193 mm
Depth
70 mm
Height
30 mm
Weight
0,4 kg
|
Input voltage DV 9V
Output Amps 300 mA
|
Πολυτροφοδοτικό για πετάλια, διαθέτει 5 x 9VDC isolated εξόδους (120 mA η κάθε μία) και επιλογέα τάσης 115/230 volts. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.