Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator 16 balanced high-headroom line inputs for individual stereo or mono use of each section Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio Dedicated balance and level controls plus +4/-10 level selection per channel Monitor/FX Send control per section with global master send control for […]
Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
16 balanced high-headroom line inputs for individual stereo or mono use of each section
Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
Dedicated balance and level controls plus +4/-10 level selection per channel
Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
Illuminated double-function “mute” button per section with additional “clip” indication provides comfortable input source/level information
Monitor/FX signal assignable to phones output for added flexibility
Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
1/4” TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
High-quality detented rotary controls for long-term reliability
Internal switch-mode power supply (100 – 240 V~) for noise-free audio and low power consumption
3-Year Warranty Program*
Designed and engineered in Germany
Audio Inputs
Type: 16 x 1/4″ / 6.3 mm TRS Connectors, Electronically Balanced, Line Level Impedance: 20 Kilohms Balanced or Unbalanced Gain Range: -∞ to +15 dB Operating Level: +4 dBu / -10 dBV (Switchable) Maximum Input Level: +22 dBu Common-Mode Rejection CMRR at 1 kHz: >50 dB Typically
Audio Outputs
Main Out (L/R): Type: 2 x 1/4″ / 6.3 mm TRS Connectors, Impedance Balanced Gain Range: -∞ to +15 dB Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced Maximum Output Level: +22 dBu
Monitor Out Send (Mono): Type: 1 x 1/4″ / 6.3 mm TRS Connector, Impedance Balanced Mono Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced Maximum Output Level: +22 dBu
Headphones Output
Type: 1 x 1/4″ / 6.3 mm TRS Connector, Stereo Minimum Load Impedance: 100 Ohms
System
Bandwidth: 20 Hz to 20 kHz (±0.2 dB) Frequency Range: 10 Hz to 200 kHz, (±3 dB) Signal-to-Noise Ratio: THD: 0.003% at +4 dB input, 1 kHz Unity Gain Crosstalk:
Power Supply
Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 15 W Mains Connection: Standard IEC Connector
Dimensions
1.7 x 19.0 x 5.9″ / 4.4 x 48.3 x 14.9 cm Rack Space: 1 RU
Weight
4.0 lb / 1.8 kg
Βάρος
2.00 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “Behringer RX1602 V2 16-channel monitor line mixer” Ακύρωση απάντησης
Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
16 balanced high-headroom line inputs for individual stereo or mono use of each section
Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
Dedicated balance and level controls plus +4/-10 level selection per channel
Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
Monitor/FX signal assignable to phones output for added flexibility
Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
High-quality detented rotary controls for long-term reliability
Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
3-Year Warranty Program*
Designed and engineered in Germany
Audio Inputs
Type: 16 x 1/4" / 6.3 mm TRS Connectors, Electronically Balanced, Line Level Impedance: 20 Kilohms Balanced or Unbalanced Gain Range: -∞ to +15 dB Operating Level: +4 dBu / -10 dBV (Switchable) Maximum Input Level: +22 dBu Common-Mode Rejection CMRR at 1 kHz: >50 dB Typically
Audio Outputs
Main Out (L/R): Type: 2 x 1/4" / 6.3 mm TRS Connectors, Impedance Balanced Gain Range: -∞ to +15 dB Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced Maximum Output Level: +22 dBu
Monitor Out Send (Mono): Type: 1 x 1/4" / 6.3 mm TRS Connector, Impedance Balanced Mono Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced Maximum Output Level: +22 dBu
Headphones Output
Type: 1 x 1/4" / 6.3 mm TRS Connector, Stereo Minimum Load Impedance: 100 Ohms
System
Bandwidth: 20 Hz to 20 kHz (±0.2 dB) Frequency Range: 10 Hz to 200 kHz, (±3 dB) Signal-to-Noise Ratio: THD: 0.003% at +4 dB input, 1 kHz Unity Gain Crosstalk:
Power Supply
Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 15 W Mains Connection: Standard IEC Connector
Dimensions
1.7 x 19.0 x 5.9" / 4.4 x 48.3 x 14.9 cm Rack Space: 1 RU
Weight
4.0 lb / 1.8 kg
L-1102
Limmiter / leveller 2 channel, απόκριση συχνότητας 20Hz-20kHz,
4 κιλά και δυνατότητα μετατροπής των in/out σε balanced 1U.
DBX-1046
Compressor - limiter 4 εισόδων, κύκλωμα "overeasy“, peakstoplus,
είσοδοι - έξοδοι XLR και 1/4 TRS. Κατάλληλος για studio, live χρήση.
Four independent channels of operation, stereo linkable in two pairs
PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
Independent Threshold and ratio controls
Switchable OverEasy® or Hard Knee compression
Classic dbx® compression
Differentially balanced gold-plated XLR and 1/4" inputs and outputs
True RMS level detection
Precision metering of input level, output level, and gain reduction
Dual True stereo or quad mono operation
Switchable +4dBu or -10dBV operation per channel
Input Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input
> +22 dBu balanced or unbalanced
CMRR
Typically >50 dB at 1 kHz
Output Connectors
XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type
Servo-balanced/unbalanced, RF filtered
Output Impedance
Balanced 30 Ohm, unbalanced 15 Ohm
Max Output
> +22 dBm balanced, > +20 dBm unbalanced
Bandwidth
20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response
0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range
> 118 dB, unweighted
THD+Noise
>0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling
True RMS Power Summing
Compressor Threshold Range
-40 dBu to +20 dBu
Compressor Ratio
1:1 to infinity:1
Compressor Threshold Characteristic
Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic
AutoDynamic™
Compressor Attack Time
Program-dependent
Compressor Release Time
Program-dependent
Compressor Output Gain
-20 to +20 dB
Limiter Threshold Range
0 dBu to +24 dBu (off)
Limiter Ratio
infinity:1
Limiter Type
PeakStopPlus® two-stage limiter
Limiter Stage 1
PeakStop® brickwall limiter
Limiter Stage 1 Attack Time
Zero
Limiter Stage 1 Release Time
Zero
Limiter Stage 2
Predictive intelligent program limiter
Limiter Stage 2 Attack Time
Program-dependent
Limiter Stage 2 Release Time
Program-dependent
OverEasy® Switch
Activates the OverEasy compression function
I/O Meter Switch
Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch
Activates the direct input-to-output hard-wire bypass
Operating Level Switch
(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch
Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter
8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter
8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator
1 LED to indicate PeakStop™ limiting
Function Switches
LED indicator for each front-panel switch
Output Transformer Options
Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage
Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption
20 Watts
Fuse
100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector
IEC receptacle
Dimensions
1.75“Hx19“Wx9“D (4.4cmx48.3cmx20.1cm)
Unit Weight
5.2 lbs. (2.4 kg)
Shipping Weight
7.6 lbs. (3.5 kg)
Product Features:
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel) Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input) 64 user memories for complete setups and/or individual module configurations Separate mic/line input with phantom power for RTA and Auto-EQ applications Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates Open architecture allowing future software updates via MIDI "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.