| Content |
-
Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
-
16 balanced high-headroom line inputs for individual stereo or mono use of each section
-
Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
-
Dedicated balance and level controls plus +4/-10 level selection per channel
-
Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
-
Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
-
Monitor/FX signal assignable to phones output for added flexibility
-
Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
-
1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
-
High-quality detented rotary controls for long-term reliability
-
Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
-
3-Year Warranty Program*
-
Designed and engineered in Germany
| Audio Inputs |
Type: 16 x 1/4" / 6.3 mm TRS Connectors, Electronically Balanced, Line Level
Impedance: 20 Kilohms Balanced or Unbalanced
Gain Range: -∞ to +15 dB
Operating Level: +4 dBu / -10 dBV (Switchable)
Maximum Input Level: +22 dBu
Common-Mode Rejection CMRR at 1 kHz: >50 dB Typically |
| Audio Outputs |
Main Out (L/R):
Type: 2 x 1/4" / 6.3 mm TRS Connectors, Impedance Balanced
Gain Range: -∞ to +15 dB
Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced
Maximum Output Level: +22 dBu
Monitor Out Send (Mono):
Type: 1 x 1/4" / 6.3 mm TRS Connector, Impedance Balanced Mono
Impedance: 240 Ohms Balanced, 120 Ohms Unbalanced
Maximum Output Level: +22 dBu |
| Headphones Output |
Type: 1 x 1/4" / 6.3 mm TRS Connector, Stereo
Minimum Load Impedance: 100 Ohms |
| System |
Bandwidth: 20 Hz to 20 kHz (±0.2 dB)
Frequency Range: 10 Hz to 200 kHz, (±3 dB)
Signal-to-Noise Ratio: THD: 0.003% at +4 dB input, 1 kHz Unity Gain
Crosstalk: |
| Power Supply |
Voltage: 100 to 240 VAC, 50/60 Hz
Power Consumption: 15 W
Mains Connection: Standard IEC Connector |
| Dimensions |
1.7 x 19.0 x 5.9" / 4.4 x 48.3 x 14.9 cm
Rack Space: 1 RU |
| Weight |
4.0 lb / 1.8 kg |
|
Μονοκάναλο feedback destroyer (αντιμικροφωνικό) με ενσωματωμένο προενισχυτή μικροφώνου, delay line, noise gate και compressor. Ανιχνεύει αυτόματα τους μικροφωνισμούς και τους εξαφανίζει. Διαθέτει επίσης low cut filter, phantom power, balanced in/out.
Χαρακτηριστικά:
Μονοκάναλο feedback destroyer (αντιμικροφωνικό) με ενσωματωμένο προενισχυτή μικροφώνου, delay line, noise gate και compressor
Αυτόματα ανιχνεύει και εξολοθρεύει 8 συχνότητες μικροφωνισμών
Ultra low noise mic/line είσοδος με gain control και +48V phantom power τροφοδοσία για πυκνωτικό μικρόφωνο
Delay line μέχρι 2,5 sec και με ρύθμιση μέτρων ποδιών και msec
Noise gate με αυτόματες και manual ρυθμίσεις
Αυτόματο compressor
Low cut filter με ρύθμιση συχνότητας
Είσοδος – έξοδος σε balanced JACK 6,35 και XLR
Frequency response: 10H – 21KHz
Noise: 92dB (line), 89dB mic
THD: 0.007%
Μετατροπείς: 24bit Sigma-Delta, 64/128-times oversampling
Η συσκευασία περιλαμβάνει: fbq100, users manual
Τροφοδοσία: AC 220V / 50Hz
Διαστάσεις: 56 x 88 x 132 mm
Βάρος: 380 gr
|
DBX-1074
4 ch noise gate με δυνατότητα λειτουργίας σε ρυθμιζόμενο εύρος
συχνοτήτων XLR in/out, insert points.
- Four independent channels of gating
- Independent key filtering
- Independent Threshold and Release controls
- Differentially balanced gold-plated XLR and 1/4" inputs and outputs
- True RMS level detection
- Stereo Coupling mode
- Switchable +4dBu or -10dBv operation per channel
| Input Connectors | XLR (Pin 2 and tip hot) | | Input Type | Electronically balanced/unbalanced, RF filtered | | Input Impedance | Balanced > 50 kOhm, unbalanced >25 kOhm | | Max Input | > +22 dBu balanced or unbalanced | | CMRR | 40dB: Typically >55 dB at 1 kHz | | Key Input | Electronically balanced/unbalanced, RF fitered Balanced 50kOhm, unbalanced > 25 kOhm | | Output Connectors | XLR (Pin 2 hot) | | Output Type | Servo-balanced/unbalanced, RF filtered | | Output Impedance | Balanced 60 Ohm, unbalanced 30 Ohm | | Max Output | > +22 dBm balanced, > +20 dBm unbalanced | | Bandwidth | 20 Hz to 20 kHz, +0/-0.5 dB | | Frequency Response | 0.35 Hz to 200 kHz, +0/-3 dB | | Noise | | | Dynamic Range | > 115 dB, unweighted | | THD+Noise | 0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), | | Interchannel Crosstalk | | | Stereo Coupling | True RMS Power Summing | | Operating Voltage | 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz | | Power Consumption | 30 Watts | | Fuse | 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T | | Power Connector | IEC receptacle | | Unit Weight | 6.9 lbs. | | Shipping Weight | 9.3 lbs. |
|
Σχόλια: Αναλογικό τηλεφωνικό υβρίδιο 2 τηλεφωνικών γραμμών, σχεδιασμένο για να ικανοποιεί τις απαιτήσεις των τηλεοπτικών και τα ραδιοφωνικών σταθμών. Βalanced είσοδοι και έξοδοι ήχου με υποδοχές XLR, έλεγχος στάθμης στο εμπρόσθιο τμήμα της συσκευής. Απομακρυσμένος έλεγχος αποδοχής-απόρριψης γραμμής, ενεργοποίησης-απενεργοποίησης τηλεφωνικής συνδιάσκεψης, ειδοποίησης εισερχόμενης κλήσης. Ενδεικτικό LED εμφάνισης των επιπέδων σήματος λήψης, αποστολής ή συνδιάσκεψης. Αυτόματη αντιστάθμιση ποιότητας γραμμής. Παρέχει δυνατότητα επέκτασης του συστήματος χρησιμοποιώντας επιπλέον συσκευές Μacrotel και επιτρέποντας τον έλεγχο δύο τηλεφωνικών γραμμών από μία είσοδο της κονσόλας.
GENERAL DATA
Power Supply 220 / 110V 25 VA
Dimension 434x351x44mm (1 rack unit)
Weight » 4 Kg
MEETING INTERFACE IN / OUT
Connector DB 9 female
Nominal in / out audio level 0 dBm
Input impedance 600 W / 10 KW (selectable)
Output impedance 100 W
* nominal line level: - 6 dBm
** it can vary depending on characteristics of telephone line
All measurements are intended at 1 kHz.
AUDIO PROGRAM IN / OUT
Connectors XLR, electr. balanced
Input impedance 600 W / 10K W (selectable)
Output level * - ¥ ¸ + 16 dBm
Output impedance 100 W
Noise on Receive output
2-Wire separation £ 25 dB**
4-Wire separation £ 70 dB
2-WIRE SECTION
Connector RJ11
Nominal input level - 6 dBm
Nominal output level - 6 dBm
Compensation mode Electronic, transf. decoupled
Impedance 600 W
4-WIRE SECTION
Connector Terminal block
Impedance 600 W
Nominal TX level 0 dBm
Nominal RX level 0 dBm
|
Description
The alphaton Feedback-Controller FC-100 is a revolutionary product for every microphone
application including wireless types. It can provide effective feedback control to any sound
reinforcement situation. It can also eliminated string feedback in guitars and bass instruments
which are equipped with piezo or condenser pickups.
The FC-100 provides 6 to 10 dB of feedback protection by analysing the incoming signal,
detecting the presence of feedback and then notching out the feedback frequency.
The FC-100 relieves the sound engineer automatically. It works dynamically and eliminates a
feedback signal before it can grow into a peak. Internally a discriminator circuit detects the
presence of regenerative feedback and triggers the automatic equaliser to insert a notch where
the feedback peak is coming up. This normally prevents other peaks from developing but if they
do, the process is repeated at high speed, thus keeping feedback under control.
Technical Data
In- and Outputs transformer balanced
max. Inputlevel + 3 dB
Gain (RS=200 Ohm, RL=2kOhm) 0 dB
Frequency Response 20 Hz ... 20 kHz, +/- 1,5 dB
Feeback Cancellation 6 ... 10 dB
Power Requirement 30 ... 48 V Phantom
Current drain ca. 8 mA
External Power Supply 9 ... 20 V DC, 3,5 mm jack, tip +
Housing Aluminium Diecast
Weight 285 grams
Dimensions 112 x 60 x 32 mm | L-1102
Limmiter / leveller 2 channel, απόκριση συχνότητας 20Hz-20kHz,
4 κιλά και δυνατότητα μετατροπής των in/out σε balanced 1U. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.