BITTNER AUDIO XV600-2x300W/100V POWER AMPLIFIER

1,277.20 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Κατόπιν Παραγγελίας Κατόπιν Παραγγελίας Κωδικός προϊόντος: XV600 Κατηγορία:
XB Series – Intelligent Power Power Without Compromises.The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality.Sequential power on, alive contacts and incorporated ground fault detection – the XV is the solution under all conditions. Without the need for […]

 

Διαβάστε περισσότερα

XB Series – Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection –
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 600:  2x 300 W / 100 V
Class:  AB
Frequency Response: 20 Hz – 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  19 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19″ x 3.5″ x 15“)

Βάρος 19.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “BITTNER AUDIO XV600-2x300W/100V POWER AMPLIFIER”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

BITTNER AUDIO XV600-2x300W/100V POWER AMPLIFIER removeTOA A-2120 ΕΝΙΣΧΥΤΗΣ PA 120WRMS 100V removeINTER-M PA-2312 Τελικός ενισχυτής 2 x 120W/100V removeBITTNER AUDIO XV400-2x200W/100V AMPLIFIER removeINTER-M PAM-520 ZONE AMPLIFIER 240W removeBITTNER AUDIO XV 1600-2X800W/100V POWER AMPLIFIER remove
NameBITTNER AUDIO XV600-2x300W/100V POWER AMPLIFIER removeTOA A-2120 ΕΝΙΣΧΥΤΗΣ PA 120WRMS 100V removeINTER-M PA-2312 Τελικός ενισχυτής 2 x 120W/100V removeBITTNER AUDIO XV400-2x200W/100V AMPLIFIER removeINTER-M PAM-520 ZONE AMPLIFIER 240W removeBITTNER AUDIO XV 1600-2X800W/100V POWER AMPLIFIER remove
Image
SKUXV600A-2120PA-2312XV400PAM-520XV1600
Rating
Price 1,277.20 με ΦΠΑ 24% 348.00 με ΦΠΑ 24% 785.65 με ΦΠΑ 24% 892.79 με ΦΠΑ 24% 707.00 με ΦΠΑ 24% 1,984.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 600:  2x 300 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  19 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

Ολοκληρωμένος ενισχυτής PA 120 WRMS, με μετασχηματιστή εξόδου 100V, με 3 mic& 2 AUX input, phantom power, high/low ρυθμιστικό EQ & priority mute στο mic 1, βάρος 10.8 kg. Εφαρμογές: σε εγκαταστάσεις 100V, μικρά καφέ, καταστήματα, εργοστάσια, κ.α.

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 120W
Power Consumption 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:83W (100V)
LOW IMPEDANCE: 4Ω (22V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 10kg

 

Τελικός ενισχυτής 2 x 120W/100V, λειτουργία
και με 24V, κατάλληλο και για πλοία.

- HIGH POWER, LOW DISTORTION

120W of RMS power with less than 1% THD.

 

- ADVANCED PROTECTION CIRCUITRY

Thermal and current overload protection, power-on delay and automatic idling circuitry for component and loudspeaker protection.

 

- BATTERY BACKUP

Can be powered by 24VDC battery for emergency backup and true portability.

 

- SLIM DESIGN, COMPACT SIZE

Streamlined design fits in a compact 3RU space.

 

PA- 2312

Rated Output (RMS, THD 1%, 1kHz)

120W

Input Sensitivity/Impedance

1V/10kΩ, Balanced

T.H.D

Less than 1%

S/N

Better than 95dB

High Pass Filter

-3dB at 400Hz

Channel Separation

Less than –70dB

Output Voltage/Impedance

EC, JAPAN: 4Ω/22V, 41Ω/70V, 83Ω/100V

USA/CANADA: 4Ω/22V, 5.2Ω/25V, 41Ω/70V

Power Source

100–120VAC or 220–240VAC; 50/60Hz, 24VDC

Power Consumption(1/8 Power)

290W

Weight

20Kg/44.1Ib

Dimensions

482(W) x 132(H) x 280(D)mm/19(W) x 5.2(H) x 11(H)in

 

 

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 400:  2x 200 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  17 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

Ενισχυτής 5 μεγαφωνικών ζωνών, 240W [RMS] 100V 6 μικροφώνων, τροφοδοσία phantom, EQ 5 περιοχών 1 mic priority, τόνος chime, remote control power, δυνατότητα τοποθέτησης των module pam cd, pam tuner, βάρος 19 kg. Kατάλληλος για ναούς, ξενοδοχεία, καταστήματα κ.λ.π.

 

PAM-510

PAM-520

Amplifier Section

(Amp In@1kHz,

4Ω Load Output)

Rated Output Power (THD 1%)

120W(RMS)

240W(RMS)

Speaker Zone 1~5 Output

25W MAX

50W MAX

Input Sensitivity/Impedance

1V/20kΩ

S/N

Better than 85dB

Frequency Response

(at 1kHz Half Power Output, ±3dB)

80Hz~18kHz

Mic Input Section

(Mic 1~4 In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

–60dBV/600Ω

S/N

Better than 55dB

Frequency Response (±3dB)

120Hz~10kHz

Tone Control

(Bass:100Hz,Treble:10kHz)

±12dB

Phantom Power

+24VDC

Line Input Section

(Line 1~2 In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

–30dBV/10kΩ

S/N

Better than 65dB

Frequency Response (±3dB)

80Hz~15kHz

Tone Control

(Bass:100Hz,Treble:10kHz)

±12dB

Remote Amp Section

(Remote In@1kHz,

Preamp Out)

Mic Input Sensitivity/Impedance

–60dBV/600Ω

S/N

Better than 55dB

Frequency Response (±3dB)

120Hz~10kHz

Tel In Section

(Tel In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

0.3V/600Ω(USA/Canada)

0.775V/600Ω(EC & Associated)

S/N

Better than 65dB

Frequency Response (±3dB)

330Hz~3kHz

Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)

0dBV/600Ω

 

T.H.D

Less than 0.5%

Record Out

–10dBV/3kΩ

Operating Temperature

–10°C~40°C

Power Source

100–120VAC or 220–240VAC; 50/60Hz, 24VDC

Power Consumption (1/8 POWER)

180W

320W

Weight

17kg/37.6lb

19kg/42lb

Dimensions

482(W) x 132(H) x 398(D)mm

19(W) x 5.2(H) x 15.7(D)in

※ Specifications and design subject to change without notice.

 

XV Series - Intelligent Power  
 
Power Without Compromises.

The XV is designed for paging, music and alarm signals. Versatile,
dynamic and extremely rugged according to IEC286-3. For the
highest requirements in safety and quality.
Sequential power on, alive contacts and incorporated ground fault
detection - the XV is the solution under all conditions. Without the
need for additional equipment. For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers
in the XV series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 1600:  2x 800 W / 100 V
Class:  AB
Frequency Response:20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans(temp. reg. variable speed)
Weight:   39 kg
Dimensions:  3 RU / 483 x 88 x 382 mm(19" x 3.5" x 15

Weight19.00 kg10.00 kg20.00 kg17.00 kg19.00 kg39.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 19.00 kg
Βάρος 10.00 kg
Βάρος 20.00 kg
Βάρος 17.00 kg
Βάρος 19.00 kg
Βάρος 39.00 kg