BMS BMS18S450L 18 S 450 L – 18″ Subwoofer 1200 W 8 Ohm

• 95 dB Sensitivity 1 W / 1 m
• 1.200 W Power Handling
• 4" Copper Sandwich Voice Coil for low Power Compression
• Double treated Cone for Water Protection
• Triple Aluminum demodulating Rings for ultra low Distortion
• Optimal for high output Subwoofers

• 96 dB Sensitivity 1 W / 1 m
• 1.100 W Power Handling
• 4" Copper Sandwich Voice Coil for low Power Compression
• Neodymium Magnet System
• Double treated Cone for Water Protection
• Triple Aluminum demodulating Rings for ultra low Distortion
• Optimal for high Output Suwoofers

                      Specifications

Nominal Diameter                       545 mm (21“)
Nominal Impedance                        4 Ω
Rated Power AES                           1000 W
Continuous Program Power                  2000 W
Sensitivity @ 1W/1m                       97.0 dB
Voice Coil Diameter                     100 mm (4“)
Voice Coil Winding Depth                  25 mm
Magnetic Gap Depth                        17 mm
Flux Density                              0.94 T
Magnet Weight                              536 g
Net Weight                                10.5 kg

Manual/Εγχειρίδιο

Nominal Specifications

    Nominal Diameter 18“, 460 mm
    Overall Diameter 18.11“, 460 mm
    Bolt Circle Diameter 17.32“, 440 mm
    Baffle Cutout Diameter 16.61“, 422 mm
    Depth 7.65“, 194.3 mm
    Flange and Gasket Thickness 0.55“, 13.9 mm


Electrical Specifications

    Minimum Impedance 6.3 Ohm
    Nominal Impedance 8 Ohm
    Nominal Power Handling*** 1200 W
    Maximum Power Handling**** 2400 W
    Sensitivity (1W/1m) 98 dB
    Frequency Range 35 - 1600 Hz
    Voice Coil Diameter 4“, 100 mm
    Winding Material Kupfer
    Former Material Glass Fiber
    Winding Depth 1.14“, 28.9 mm
    Magnetic Gap Depth 0.47“, 12 mm
    Flux Density 1.22 T


THIELE & SMALL Parameters

    Resonant Frequency (fs) 35 Hz
    DC Resistance (Re) 5 Ohm
    BL Product (BL) 24.8 N/A
    Diaphragm Mass inc. Airload (Mms) 211.8 grams
    Mechanical Compliance of Suspension (Cms) 0.098 mm/N
    Rms 4.19 Kg/s
    Electromagnetic Q (Qes) 0.38
    Mechanical Q (Qms) 11.1
    Total Q (Qts) 0.37
    Compliance Equivalent Volume (Vas) 6.74 ft³, 190.8 dm³
    Surface Area of Cone (Sd) 181.97“², 1174 cm²
    Maximum Linear Excursion (Xmax)* 12.45 mm
    Xdamage** 21 mm
    Coil Inductance (Le) 1.26 mH
    Diaphragm mass (Mmd) 189.1 g
    Eta Zero 2.1 %

Notes

    *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    **Maximum excursion before permanent damage
    ***2 Hours Test According to AES 2-1984 Rev. 2003
    ****Maximum power is defined as 3dB greater than nominal power

DELTA PRO Serie 400W

Recommended for professional audio in both sealed and vented enclosures. Ideal for full-range, mid/hi, and
monitor wedges.

• Nominal Basket Diameter 18“, 457 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 500 W / Music Program 1000 W
• Resonance 28 Hz
• Usable Frequency Range 37 Hz - 250 Hz
• Sensitivity 96
• Magnet Weight 67 oz.
• Gap Height 0.38“, 9.53 mm
• Voice Coil Diameter 2.5“, 63.5 mm 

• Resonant Frequency (fs) 28 Hz
• DC Resistance (Re) 5.3
• Coil Inductance (Le) 3.43 mH
  
• Mechanical Q (Qms) 10.38
• Electromagnetic Q (Qes) 0.33
• Total Q (Qts) 0.32
• Compliance Equivalent Volume (Vas) 493.19 liters / 17.41 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 796.00 cc
• Mechanical Compliance of Suspension (Cms) 0.25 mm/N
• BL Product (BL) 18.9 T-M
• Diaphragm Mass inc. Airload (Mms) 128.1 grams
• Efficiency Bandwidth Product (EBP) 84
• Maximum Linear Excursion (Xmax) 6.7 mm
• Surface Area of Cone (Sd) 1188.0 cm²
• Maximum Mechanical Limit (Xlim) 15.0 mm 

• Recommended Enclosure Volume
  Sealed N/A
  Vented 85-297 liters/3.0-10.5 cu. ft.
• Overall Diameter 18.00“, 457.20 mm
• Baffle Hole Diameter 16.57“, 420.88 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.28“, 7.11 mm
• Mounting Holes B.C.D. 17.25“, 438.15 mm
• Depth 8.13“, 206.50 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Vented and extended core
• Die-cast aluminum basket
• Paper Cone
• Cloth cone edge
• Solid composition paper dust cap