BMS BMS4512NDH 4512 ND – 4″ Neodymium high-frequency Driver 80 W 16 Ohm

395.19 με ΦΠΑ 24%

Σε απόθεμα

EAN: 4049521121159
Υπολογισμός δόσεων
Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Παράδοση σε 4-10 ημέρες Παράδοση σε 4-10 ημέρες Κωδικός προϊόντος: BMS4512NDH Κατηγορία:
Unique Planar Wave Design  Cost effective, high efficiency Neodymium magnet assembly Perfect acoustical coupling of individual units to create virtually continuous line source 112 dB sensitivity 1 W / 1 m 1 kHz Crossover Extended high frequency response up to 20 kHz The BMS 4512 ND Planar wave driver radiates a coherent planar wave front […]

 

Διαβάστε περισσότερα

  • Unique Planar Wave Design 
  • Cost effective, high efficiency Neodymium magnet assembly
  • Perfect acoustical coupling of individual units to create virtually continuous line source
  • 112 dB sensitivity 1 W / 1 m
  • 1 kHz Crossover
  • Extended high frequency response up to 20 kHz

The BMS 4512 ND Planar wave driver radiates a coherent planar wave front form a rectangular piston without internal diffraction for superior dispertion control and high fidelity sound. This distinctive new transducer was engineered to work with 4-inch (4″ x 1“) rectangular throat waveguides providing extremely high sensitivity.

The 4512 ND is optimised for 10° vertical dispertion and allows a horizontal coverage from 60° to 120° depending on the waveguide used. The unique design of the 4512 ND planar wave driver allows perfect acoustical coupling of individual units to create virtually continuous line source.

The BMS annular diaphragm together with the cost effective, high efficiency Neodymium magnet assembly offers an economical solution for high performance line arrays.

 The ring diaphragm works similar as a wound 140 mm long ribbon diaphragm providing linear frequency response up tp 20 kHz. The unique planar wave phase plug provide a coherent planar wave front without internal diffraction.

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Δώστε πρώτος μία αξιολόγηση “BMS BMS4512NDH 4512 ND – 4″ Neodymium high-frequency Driver 80 W 16 Ohm”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

SettingsBMS BMS4512NDH 4512 ND - 4" Neodymium high-frequency Driver 80 W 16 Ohm removeB & C Speakers DE-200 Driver HF 1inch 40W removeB & C Speakers DE-85 8 OMH Driver 140W RMS, 108dB, 500-18.000 Hz removeJBL 2447H COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-16 Driver 60W RMS, 106dB, 2.5-20k removeB & C Speakers DE-12 Driver 40WRMS, 106,5dB, 80hm remove
Image
SKUBMS4512NDHDE-200DE-852447HDE-16DE-12
Rating
Price 395.19 με ΦΠΑ 24% 120.00 με ΦΠΑ 24% 206.66 με ΦΠΑ 24% 916.00 με ΦΠΑ 24% 99.20 με ΦΠΑ 24% 70.00 με ΦΠΑ 24%
Stock

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

AvailabilityΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content
  • Unique Planar Wave Design 
  • Cost effective, high efficiency Neodymium magnet assembly
  • Perfect acoustical coupling of individual units to create virtually continuous line source
  • 112 dB sensitivity 1 W / 1 m
  • 1 kHz Crossover
  • Extended high frequency response up to 20 kHz

The BMS 4512 ND Planar wave driver radiates a coherent planar wave front form a rectangular piston without internal diffraction for superior dispertion control and high fidelity sound. This distinctive new transducer was engineered to work with 4-inch (4" x 1“) rectangular throat waveguides providing extremely high sensitivity.

The 4512 ND is optimised for 10° vertical dispertion and allows a horizontal coverage from 60° to 120° depending on the waveguide used. The unique design of the 4512 ND planar wave driver allows perfect acoustical coupling of individual units to create virtually continuous line source.

The BMS annular diaphragm together with the cost effective, high efficiency Neodymium magnet assembly offers an economical solution for high performance line arrays.

 The ring diaphragm works similar as a wound 140 mm long ribbon diaphragm providing linear frequency response up tp 20 kHz. The unique planar wave phase plug provide a coherent planar wave front without internal diffraction.

Driver 1" 40W, 108,5dB

100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity

 

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

Driver 1" και έξοδο throat 1“, 8 Ohm, 80W continuous / 40W Nominal Power (AES), ευαισθησία 107dB (1w/1m) απόκριση συχνότητας 1,5 - 18kHz, 1,6kg. DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.

Driver 40WRMS, 106,5dB, 80hm

50 W continuous program power capacity
1” horn throat diameter
36 mm (1.4 in) aluminium voice coil
Mylar diaphragm
1500 – 18000 Hz response
106 dB sensitivity

 

Weight1.002.004.506.001.702.00
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 2.00 kg
Βάρος 4.50 kg
Βάρος 6.00 kg
Βάρος 1.70 kg
Βάρος 2.00 kg