BMS BMS4545NDL 4545 ND – 1″ Neodymium high-frequency Driver 80 W 8 Ohm

236.08 με ΦΠΑ 24%

Σε απόθεμα

EAN: 4049521121074
Υπολογισμός δόσεων
Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Παράδοση σε 4-10 ημέρες Παράδοση σε 4-10 ημέρες Κωδικός προϊόντος: BMS4545NDL Κατηγορία:
1″ High Frequency Neodymium Compression Driver BMS4545NDL is a powerful 1″ professional compression driver that delivers superb sonic quality in a very small package. The unique BMS annular diaphragm together with the cost effective, high energy Neodymium magnet assembly offers an economical solution for a wide variety of high level professional reinforcement system applications. BMS4545NDL […]

 

Διαβάστε περισσότερα

1″ High Frequency Neodymium Compression Driver

BMS4545NDL is a powerful 1″ professional compression driver that delivers superb sonic quality in a very small package. The unique BMS annular diaphragm together with the cost effective, high energy Neodymium magnet assembly offers an economical solution for a wide variety of high level professional reinforcement system applications.

BMS4545NDL achieves very high sensitivity and linear frequency response up to 20 kHz. The sound of BMS4545ND is extremely transparent and detailed, it has an exceptional dynamic range and produces even the most complex music signals with depth and definition.

  • Type: Compression Driver
  • Throat Diameter: 1“
  • Throat Diameter: 25,4 mm
  • Voice Coil Diameter: 1,75“
  • Voice Coil Diameter: 44,4 mm
  • Overall Diameter: 85 ± 0,1 mm
  • Bolt Circle Diameter: 57,15 mm
  • Depth: 48 mm
  • Nominal Impedance: 8 ohms
  • Nominal Power Handling: 80 W
  • Maximum Power Handling: 400 W
  • Sensitivity (with Horn 1W/1m): 113 dB
  • Frequency Range: 500 – 20000 Hz
  • Recommended Crossover Frequency: 1300 Hz
  • Voice Coil Former: Kapton
  • Diaphram Material: Polyester
  • Magnet Material: Ceramic
  • Mounting Thread (screw on): 1 3/8″ – 18N screw
Βάρος 0.56 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Δώστε πρώτος μία αξιολόγηση “BMS BMS4545NDL 4545 ND – 1″ Neodymium high-frequency Driver 80 W 8 Ohm”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

SettingsBMS BMS4545NDL 4545 ND - 1" Neodymium high-frequency Driver 80 W 8 Ohm removeB & C Speakers DE-85 8 OMH Driver 140W RMS, 108dB, 500-18.000 Hz removeB & C Speakers DE-400TN 100 W, 1” horn, Titanium Driver removeJBL 2447H COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-750TN 8Ohm 220W Driver με Διαφραγμα Τιτανίου 107.5 dB sensitivity removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox remove
Image
SKUBMS4545NDLDE-85DE-400TN2447HDE-750TNDE-45
Rating
Price 236.08 με ΦΠΑ 24% 206.66 με ΦΠΑ 24% 179.00 με ΦΠΑ 24% 916.00 με ΦΠΑ 24% 335.00 με ΦΠΑ 24% 136.15 με ΦΠΑ 24%
Stock

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

AvailabilityΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

1" High Frequency Neodymium Compression Driver

BMS4545NDL is a powerful 1" professional compression driver that delivers superb sonic quality in a very small package. The unique BMS annular diaphragm together with the cost effective, high energy Neodymium magnet assembly offers an economical solution for a wide variety of high level professional reinforcement system applications.

BMS4545NDL achieves very high sensitivity and linear frequency response up to 20 kHz. The sound of BMS4545ND is extremely transparent and detailed, it has an exceptional dynamic range and produces even the most complex music signals with depth and definition.

  • Type: Compression Driver
  • Throat Diameter: 1“
  • Throat Diameter: 25,4 mm
  • Voice Coil Diameter: 1,75“
  • Voice Coil Diameter: 44,4 mm
  • Overall Diameter: 85 ± 0,1 mm
  • Bolt Circle Diameter: 57,15 mm
  • Depth: 48 mm
  • Nominal Impedance: 8 ohms
  • Nominal Power Handling: 80 W
  • Maximum Power Handling: 400 W
  • Sensitivity (with Horn 1W/1m): 113 dB
  • Frequency Range: 500 - 20000 Hz
  • Recommended Crossover Frequency: 1300 Hz
  • Voice Coil Former: Kapton
  • Diaphram Material: Polyester
  • Magnet Material: Ceramic
  • Mounting Thread (screw on): 1 3/8" - 18N screw

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Ηf driver νεοδυμίου 1'' 100W διάφραγμα
τιτανίου 106dΒ προτείνεται για εφαρμογές line
array.

 

DE400TN
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1200 – 18000 Hz response
106 dB sensitivity
Compact Neodymium magnet assembly
Shorting copper cap for extended HF response

 

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

Driver 2“, 110W, 107.5dB, 0.5-18kHz, διάφραγμα τιτανίου, 6.3kg 

 

The B&C Speakers DE750TN-8 2" titanium HF driver is a world-class high frequency transducer that is capable of extreme output levels combined with incredible fidelity and musicality. A powerful ceramic ferrite magnet structure provides the high magnetic flux density required for the DE750TN's high efficiency, accuracy, and extended high frequency response. A copper cap on the pole piece reduces inductive losses and extends HF capabilities.


Highlights


- 220 watt continuous program power capacity
- 3" (75mm)aluminum voice coil
- Titanium diaphragm
- Copper shorting cap for extended HF response
- 107.5 dB sensitivity
- 2" (horn throat diameter) bolt-on format (4-bolt)
- 500 – 18000 Hz response

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Weight0.564.505.006.005.002.00
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 0.56 kg
Βάρος 4.50 kg
Βάρος 5.00 kg
Βάρος 6.00 kg
Βάρος 5.00 kg
Βάρος 2.00 kg