The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. […]
The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.
This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.
Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)
Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Features
Four Input / Output Card Slots
Configurable Inputs / Outputs
Analog Inputs (with Phantom Power per Channel)
Analog Outputs
Digital Inputs (AES/EBU and S/PDIF)
Digital Outputs (AES/EBU and S/PDIF)
Configurable Signal Processing
Rich Palette of Processing and Logic Objects
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
Informative Front Panel Display
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
HiQnet Device
Configuration, Control and Monitoring from HiQnet London Architect
Βάρος
3.00 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “BSS BLU-160 NETW.SIGNAL PROCESSOR 4XDSP” Ακύρωση απάντησης
Ευέλικτες routing configurations για όλες τις τυποποιημένες μονοφωνικές και στερεοφωνικές λειτουργίες εξόδου
2 αναλογικές είσοδοι και 6 αναλογικές έξοδοι (XLR)
Ενεργό crossover με φίλτρο Bessel, Butterworth και Linkwitz-Riley με κλίση έως 24 dB/οκτάβα
Μέχρι 30 προεπιλογές χρήστη αποθηκεύσιμες στη συσκευή μέσω λογισμικού
Ψηφιακά ρυθμιζόμενη ευαισθησία εισόδου
Είσοδοι και έξοδοι με 4-ψήφιο μετρητή στάθμης LED καθώς και ένδειξη LED clip και limit
Διακόπτης σίγασης με ένδειξη LED για κάθε έξοδο
Παραμετρικό EQ 7 ζωνών ανά έξοδο
Ρυθμιζόμενη καθυστέρηση σήματος έως 7 ms για τις εξόδους
Limiter εξόδου με ρυθμιζόμενα όρια και αυτόματες ρυθμίσεις attack και release ως προστασία υπερφόρτωσης για το ενισχυτικό σας σύστημα
Εναλλασσόμενη φάση
Λειτουργία κλειδώματος για την αποφυγή ανεπιθύμητων αλλαγών στις ρυθμίσεις
Sample rate: 67 kHz
(19") 48.3 cm εγκατάσταση ραφιού 1 U
Συμβατό με Win XP, Win Vista, Win 7, Win 10, OS X 10,5 ή καλύτερo
Content
The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.
Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)
Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Features
Four Input / Output Card Slots
Configurable Inputs / Outputs
Analog Inputs (with Phantom Power per Channel)
Analog Outputs
Digital Inputs (AES/EBU and S/PDIF)
Digital Outputs (AES/EBU and S/PDIF)
Configurable Signal Processing
Rich Palette of Processing and Logic Objects
256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
Clear Front Panel LED Indication
Informative Front Panel Display
Bi-Directional Locate Functionality
12 Control Inputs and 6 Logic Outputs for GPIO Integration
Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
HiQnet Device
Configuration, Control and Monitoring from HiQnet London Architect
The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets.
The absolute latest in available technology is utilized with 32-bit (40-bit extended) floating point processor and high performance 24-bit Analog Converters. The high-bit DSP prevents noise and distortion induced by truncation errors of the commonly used 24-bit fixed-point devices. A complete set of parameters include I/O levels, delay,polarity, 6 bands of parametric EQ per channel, multiple crossover selections and full function limiters. The DX 4008 can be controlled or configured in real time on the panel or with the intuitive PC GUI accessed via the RS 232 interface. Software upgrade for CPU and DSP via PC keeps the device current with newly developed algorithms and function once available. Multiple setup storage and system security complete this professional package.
Features
The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets
Sampling rate can be set to 96kHz
Precise frequency control is achieved with its 1 Hz resolution
Inputs and outputs can be routed in multiple configuration to meet any requirements
The DX 4008 is shipped with a special PC Graphic User Interface (GUI) application - XLink
XLink gives the user an option to control the DX 4008 unit from a remote PC via the RS232 serial communication link
The GUI application makes much easier control and monitor the device, allowing the user to get the whole picture on one screen
Programs can be recalled and stored from/to PC's hard drive, thus expanding the storage to become virtuality limitless
INPUT AND OUTPUT SECTION
Input Impendance:
>10
kΩ
Output Impendance:
50
Ω
Maximum Level:
+ 20
dBu
Type:
XLR 3
Electronically balanced
AUDIO PERFORMANCE
Frequency Response:
+/- 0.1
dB (20 to 20 kHz)
Dynamic Range:
115
dB typ (unweighted)
CMMR:
> 60
dB (50 to 10 kHz)
Crosstalk:
dB
Distortion:
0.001%
(1 kHz @ 18 dBu)
DIGITAL AUDIO PERFORMANCE
Resolution:
32 bit
(40-bit extended)
Sampling Rate:
48 / 96
kHz
A/D - D/A Converters:
24
bit
Propagation Delay:
3
ms
No. of Programs:
30
FRONT PANEL CONTROL
Display:
4 x 26
Character Backlit LCD
Buttons:
12 Mute Controls 12 Gain / Manu Controls 6 Menu Controls
“DATA" control:
(dial encoder)
Embedded Thumb Wheel
Level Meters:
5
segment LED
Interface
RS 232
Female DB-9
LIMITERS
Threshold:
-20 to +20
dBu
Attack Time:
0.3 to 100
ms
Release Time:
2 to 32
X the attack time
EQUALISATION
Type:
Parametric, Hi-shelf, Lo-shelf
6 per I/O
Gain:
in 0.25dB steps
-30 to +15dB
Bandwidth:
(Q=0.5 to 72)
0.02 to 2.50 octaves
CROSSOVER FILTERS
Filter Types:
Butterworth, Bessel, Linkwitz Riley
Slopes:
6 to 24dB/oct (96kHz)
6 to 48dB/oct (48kHz)
POWER REQUIREMENT
Operating voltage:
220÷240 / 110÷120 ~ 50 / 60
V ~ Hz
Power (consumption):
mA
Fuse model:
Operating temperature range:
0 ÷ +55
°C
Operating humidity:
20 ÷ 90
% RH non-condensing
PHISICAL SPECIFICATION
Height:
44 / 1.73
mm/inch
Width:
483 / 19.01
mm/inch
Depth:
203 / 7.99
mm/inch
Net Weight:
Kg/Lbs
3 / 6.61
SHIPPING INFORMATION
Package height:
80 / 3.14
mm/inch
Package width:
615 / 24.2
mm/inch
Package depth:
360 / 14.17
mm/inch
Shipping Weight:
4.3 / 9.4
Kg/Lbs
DBX 223XS
Ηλεκτρονικό crossover 2 δρόμων με επιλεγόμενη συχνότητα cross,
ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα,
L & R είσοδοι & balanced έξοδοι με XLR.
Overview
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs
Features
XLR balanced ins and outs
Mode switch for stereo 2-way or mono 3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
Specifications
Input Connectors
XLR (pin 2 hot)
Input Type
Electronically balanced/unbalanced, RF filtered
Input Impedance
Balanced >50k ohm, unbalanced >25k ohm
Max Input
>+22dBu balanced or unbalanced
CMRR
>40dB, typically >55dB at 1kHz
Output Connectors
XLR
Output Type
Impedance-balanaced/unbalanced, RF filtered
Output Impedance
Balanced 200 ohm, unbalanced 100 ohm
Max Output
>+21dBu balanced/unbalanced into 2k ohms or greater
< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk
< -80 dB, 20 Hz to 20 kHz
Crossover Frequencies (Stereo Mode)
Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Frequencies (Mono Mode)
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Filter Type
Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch
Inverts the phase at the output, one switch per output.
x1 / x10 Switch
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch
Selects stereo/mono and 2/3-way operation
LF Sum Switch
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Είσοδος: line μέσω 2 x 3-pin XLR
Έξοδος: line μέσω 6 x 3-pin XLR
Συχνότητα Crossover:
20-20000 Hz
Max. level:
Είσοδος: +22 dBu
Έξοδος: +9 dBu
USB θύρα:
Τύπος B
Σύνδεση PC:
DXO Λογισμικό μέσω USB, το λογισμικό μπορεί να ενημερωθεί
Σχεδιασμός περιβλήματος:
(19") 48.3 cm εγκατάσταση ραφιού 1 U
Διαστάσεις:
Πλάτος: 48,3 cm
Βάθος: 12,8 cm
Ύψος: 4,45 cm
Βάρος:
1,77 kg
Λειτουργικό σύστημα:
Win XP, Win Vista, Win 7, Win 10, OS X 10,5 ή καλύτερα
Advanced Feedback Suppression® Processor with Full LCD Display
Hear No Evil and See no Evil.
The AFS2 Advanced Feedback Suppression processor has been completely re-designed to take the foundation of the best selling AFS224 and bring it to thte next level. The AFS2 now offers the highly-intuitive Wizard function that takes all of the guesswork out of setting up any room. The AFS2 also incorporates a completely re-designed Advanced Feeback Supression module. Best of all, the AFS2 now provides the user with a full LCD display setup and monitoring.
With its powerful DSP module, the AFS2 provides all the processing and control necessary for both installation and live use. Ten and twelve filter feedback elimination processors are the de facto standard, but the AFS2 offers a dedicated feedback suppression processor that offers up to 24 filters per channel with filter Qs up to 1/80 of an octave. To achieve these staggering numbers dbx utilized their improved AFS technology that had previously only been available in the upper echelon line of products and made it available in this stand-alone processor. In addition to the plethora of feedback suppression filters available, the AFS2 also offers selectable modes, live filter lift, and types of filtration, which are all readily available via the intuitive user interface front panel. With all of these state-of-the-art features in place, not only do you hear no evil, but you will now be able to see no evil. ®
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.