BSS BLU-160 NETW.SIGNAL PROCESSOR 4XDSP

3,410.92 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: Z-BLU160 Κατηγορία:
The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. […]

 

Διαβάστε περισσότερα

The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.

The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.

This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.

Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Features

  • Four Input / Output Card Slots
  • Configurable Inputs / Outputs
  • Analog Inputs (with Phantom Power per Channel)
  • Analog Outputs
  • Digital Inputs (AES/EBU and S/PDIF)
  • Digital Outputs (AES/EBU and S/PDIF)
  • Configurable Signal Processing
  • Rich Palette of Processing and Logic Objects
  • 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
  • Clear Front Panel LED Indication
  • Informative Front Panel Display
  • Bi-Directional Locate Functionality
  • 12 Control Inputs and 6 Logic Outputs for GPIO Integration
  • Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
  • HiQnet Device
  • Configuration, Control and Monitoring from HiQnet London Architect
Βάρος 3.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “BSS BLU-160 NETW.SIGNAL PROCESSOR 4XDSP”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

BSS BLU-160 NETW.SIGNAL PROCESSOR 4XDSP removeBEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover removeDBX 223XS Ηλεκτρονικό crossover 2 δρόμων removeDBX AFS2 FEEDBACK CONTROLLER 2CH Αντι-μικρφωνισμού επεξεργαστής removeJBL CROSSOVER ΓΙΑ VRX 932LA-1 removeBEHRINGER CX3400 3-Way Stero/4-Way Mono Frequency Crossover with Limiters remove
NameBSS BLU-160 NETW.SIGNAL PROCESSOR 4XDSP removeBEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover removeDBX 223XS Ηλεκτρονικό crossover 2 δρόμων removeDBX AFS2 FEEDBACK CONTROLLER 2CH Αντι-μικρφωνισμού επεξεργαστής removeJBL CROSSOVER ΓΙΑ VRX 932LA-1 removeBEHRINGER CX3400 3-Way Stero/4-Way Mono Frequency Crossover with Limiters remove
ImageBehringer CX2310 Super X Pro V2 1behringer crossover 2-3way active limiter stereo mono
SKUZ-BLU160E013073DBX 223XSDBX AFS2CROSSOVERVRX932LA1E005259
Rating
Price 3,410.92 με ΦΠΑ 24% 127.00 με ΦΠΑ 24% 200.00 με ΦΠΑ 24% 400.00 με ΦΠΑ 24% 354.75 με ΦΠΑ 24% 164.91 με ΦΠΑ 24%
Stock

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Μόνο 2 απομένουν σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Μόνο 2 απομένουν σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
  • 2-Way stereo or 3-way mono mode
  • Additional subwoofer output
  • Linkwitz-Riley filter with 24 dB / octave
  • Sub-woofer frequency range separately adjustable
  • Individual output gain controls and output mute switch for all bands
  • 2 Balanced XLR inputs with gold-plated contacts
  • 5 Balanced XLR outputs with gold-plated contacts
  • Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound
  • Easy-to-read status LEDs
  • Built-in power supply 100-240V, 50-60 Hz
  • Dimensions (H x W x D): 44 x 483 x 147 mm
  • Weight: 1.6 kg
Content

The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.

The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.

Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Features
  • Four Input / Output Card Slots
  • Configurable Inputs / Outputs
  • Analog Inputs (with Phantom Power per Channel)
  • Analog Outputs
  • Digital Inputs (AES/EBU and S/PDIF)
  • Digital Outputs (AES/EBU and S/PDIF)
  • Configurable Signal Processing
  • Rich Palette of Processing and Logic Objects
  • 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
  • Clear Front Panel LED Indication
  • Informative Front Panel Display
  • Bi-Directional Locate Functionality
  • 12 Control Inputs and 6 Logic Outputs for GPIO Integration
  • Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
  • HiQnet Device
  • Configuration, Control and Monitoring from HiQnet London Architect
Crossover 2-Way stereo or 3-way mono mode Additional subwoofer output Linkwitz-Riley filter with 24 dB / octave Sub-woofer frequency range separately adjustable Individual output gain controls and output mute switch for all bands 2 Balanced XLR inputs with gold-plated contacts 5 Balanced XLR outputs with gold-plated contacts Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound Easy-to-read status LEDs Built-in power supply 100-240V, 50-60 Hz Dimensions (H x W x D): 44 x 483 x 147 mm Weight: 1.6 kgDBX 223XS Ηλεκτρονικό crossover 2 δρόμων με επιλεγόμενη συχνότητα cross, ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα, L & R είσοδοι & balanced έξοδοι με XLR. Overview More sound to your amps and speakers The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs Features
  • XLR balanced ins and outs
  • Mode switch for stereo 2-way or mono 3-way operation
  • Low frequency summed (subwoofer) output
  • x10 range switch on both channels
  • 40Hz high pass (low cut) filter both channels
  • Phase reverse switch on all outputs
  • Individual level controls on all outputs
  • 24dB per octave Linkwitz-Riley filters (the professional standard)
  • Stereo/Mono status LEDs indicate the selected mode
  • dbx® 2 year parts and labor as standard
  • CSA NRTL/C approved
  • CE compliant
Specifications
Input Connectors XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced >50k ohm, unbalanced >25k ohm
Max Input >+22dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors XLR
Output Type Impedance-balanaced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohms or greater
Bandwidth 20Hz to 20kHz, +/-0.5dB
Frequency Response < 3 Hz to > 90 kHz, +0/-3 dB
Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth
Signal-to-Noise (Stereo Mode) >94dB (Low Output), >91dB (High Output)
Signal-to-Noise (Mono Mode) >94dB (Low Output), >93dB (Mid Output), >91dB (High Output)
Dynamic Range > 106 dB, unweighted, any output
THD+Noise < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk < -80 dB, 20 Hz to 20 kHz
Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch Inverts the phase at the output, one switch per output.
x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch Selects stereo/mono and 2/3-way operation
LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
Operating Voltage 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ
Operating Temperature 32°F to 113°F (0°C to 45°C)
Power Consumption 15W
Power Connector IEC receptacle
Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Unit Weight 3.7 lbs. (1.7 kg)
Shipping Weight 5.4 lbs. (2.5 kg)
Advanced Feedback Suppression® Processor with Full LCD Display

 

Hear No Evil and See no Evil.

The AFS2 Advanced Feedback Suppression processor has been completely re-designed to take the foundation of the best selling AFS224 and bring it to thte next level. The AFS2 now offers the highly-intuitive Wizard function that takes all of the guesswork out of setting up any room.  The AFS2 also incorporates a completely re-designed Advanced Feeback Supression module.  Best of all, the AFS2 now provides the user with a full LCD display setup and monitoring.

With its powerful DSP module, the AFS2 provides all the processing and control necessary for both installation and live use. Ten and twelve filter feedback elimination processors are the de facto standard, but the AFS2 offers a dedicated feedback suppression processor that offers up to 24 filters per channel with filter Qs up to 1/80 of an octave. To achieve these staggering numbers dbx utilized their improved AFS technology that had previously only been available in the upper echelon line of products and made it available in this stand-alone processor. In addition to the plethora of feedback suppression filters available, the AFS2 also offers selectable modes, live filter lift, and types of filtration, which are all readily available via the intuitive user interface front panel.  With all of these state-of-the-art features in place, not only do you hear no evil, but you will now be able to see no evil. ®

 

Features

  • Wizard Setup Function
  • Full LCD Display
  • dbxʼs patented (Advanced Feedback Suppression) AFS™ technology
  • 24 Programmable Filters per Channel
  • Stereo or Dual Independent Channel Processing
  • Live and Fixed Filter Modes
  • Selectable Filter Lift Times
  • Application-specific filter types include: Speech and Music Low, Med and High
  • Input channel Metering
  • 24 LED per Channel Filter Metering
  • XLR and TRS Inputs and Outputs
Specifications

Number of Inputs

2

Input Connectors

Female XLR and 1/4” TRS

Input Type

Electronically balanced/unbalanced, RF filtered

Input Impedance

Balanced 50kΩ, Unbalanced 25kΩ

Max input line level

+20 dBu

CMRR

> 40dB, typically >55dB @ 1kHz

Number of Outputs

2

Output Connectors

Male XLR and 1/4” TRS

Output Type

Electronically balanced/unbalanced, RF filtered

Output Impedance

Balanced >120 Ω, Unbalanced >60 Ω

Max Output Level

+20 dBu

A/D Converter

dbx Type IV™ Conversion System

A/D Dynamic Range

>113 dB A-weighted, >110 dB unweighted, 22kHz BW

Type IV Dynamic Range

>119 dB, A-weighted, 22kHz BW; >117 dB, unweighted, 22kHz BW

A/D Conversion

24-bit

Sample Rate

48kHz

D/A Dynamic Range

112 dB A-weighted, 109 dB unweighted

D/A Conversion

24-bit

Dynamic Range

109 dB A-weighted, 106 dB unweighted, 22kHz BW

THD+Noise

0.003% typical at +4 dBu, 1 kHz

Frequency Response

20Hz – 20kHz, +/- 0.5dB

Interchannel Crosstalk

>80 dB typical

Crosstalk input to output

>80 dB

Operating Voltage

100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz

Power Consumption

9 W

Unit Weight

4.5 lbs. (2.04 kg)

Dimensions

1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)

 

Behringer CX-3400 3-Way Stero/4-Way Mono Frequency Crossover with Limiters The CX3400 is an active frequency crossover enabling 2 or 3-way stereo or even 4-way mono operation. Each band features two 24-dB Linkwitz-Riley filters, as well as individual IGC limiters, while the integrated delay enables flexible time alignment. Polarity switches for each output allow quick and easy runtime compensation for various driver and horn types.2 Respectively: 3-Way stereo or 4-way mono 24 dB / octave Linkwitz-Riley filter Mono-Sub switchable LF / HF gain regular / mutable CD horn EQ switchable Vertex frequency tunable Factor switching (10x) Multi-band limiter switch / variable (threshold) Limit display each way LF Delay (max 2ms / 60cm) Phase reverse 25 Hz subsonic filter, sym XLR in / out with multiband limiters Dimensions: 19", 1U, 147 mm case depth Weight: 1.7 kg
Weight3.00 kg1.6 kg2.50 kg3 kg1.00 kg4.30 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 3.00 kg
Βάρος 1.6 kg
Βάρος 2.50 kg
Βάρος 3 kg
Βάρος 1.00 kg
Βάρος 4.30 kg