CAMBRIDGE AUDIO CX A60 Integrated Amplifier 60W with DAC (Silver)

894.00 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: CX A60 SILVER Κατηγορία:
Toroidal Transformer We mount the premium toroidal transformer centrally, to reduce flux or magnetic disturbance from the volume pot.   Dynamic Thermal Tracking transistors The output power transistors used by the CXA60 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally […]

 

Διαβάστε περισσότερα

Toroidal Transformer

We mount the premium toroidal transformer centrally, to reduce flux or magnetic disturbance from the volume pot.

 

Dynamic Thermal Tracking transistors

The output power transistors used by the CXA60 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can re-bias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA60 is always running at optimum performance.

Musical Subwoofer output

If you want to use a subwoofer as part of your speaker complement, the CXA60 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3kHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.

Fully balanced signal management

Thereʼs some revolutionary signal management happening beneath the lid of the CXA60. For the first time, our engineers decided to go fully balanced rather than single-ended all the way through. As a consequence, any noise that that might be picked up in the audio signal while routing through the amplifier is cancelled before itʼs output.

Reinventing the signal path

The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet. Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA60 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well.

 

Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences. This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier. We can hear very clearly what each of those components is doing.

This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.

 

Bespoke Bluetooth

If you want to use your CXA60 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100 is done in-house. We even include an extension cable which enables you get the best Bluetooth range.

Embracing classic design

Sometimes thereʼs a good reason to keep things uncomplicated. The CXA60 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA60 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA60 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.

 
 

  • Power output:60W RMS into 8 Ohms, 90W RMS into 4 Ohms
  • DAC:Wolfson WM8740
  • Frequency Response:
Βάρος 8.30 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “CAMBRIDGE AUDIO CX A60 Integrated Amplifier 60W with DAC (Silver)”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

CAMBRIDGE AUDIO CX A60 Integrated Amplifier 60W with DAC (Silver) removeLYRIC AUDIO TI 120 signature M TUBE ΕΝΙΣΧΥΤΗΣ removeNorth Star MONOBLOCK ΕΝΙΣΧΥΤΗΣ SILVER removeARCAM FMJ P49 Stereo Ενισχυτής Τελικός 2x 200W 8Ω removeCAMBRIDGE AUDIO CX A80 Integrated Amplifier 80W with DAC (Black) removeMARANTZ MM7025 ΣΤΕΡΕΟΦΩΝΙΚΟΣ ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2 x 120W 8Ohm remove
NameCAMBRIDGE AUDIO CX A60 Integrated Amplifier 60W with DAC (Silver) removeLYRIC AUDIO TI 120 signature M TUBE ΕΝΙΣΧΥΤΗΣ removeNorth Star MONOBLOCK ΕΝΙΣΧΥΤΗΣ SILVER removeARCAM FMJ P49 Stereo Ενισχυτής Τελικός 2x 200W 8Ω removeCAMBRIDGE AUDIO CX A80 Integrated Amplifier 80W with DAC (Black) removeMARANTZ MM7025 ΣΤΕΡΕΟΦΩΝΙΚΟΣ ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2 x 120W 8Ohm remove
Image
SKUCX A60 SILVERTI 120 signature MMONOBLOCKFMJP49CXA80MM7025
Rating
Price 894.00 με ΦΠΑ 24% 3,112.59 με ΦΠΑ 24% 2,126.44 με ΦΠΑ 24%4,536.59 με ΦΠΑ 24% 1,229.00 με ΦΠΑ 24%990.00 με ΦΠΑ 24%
Stock

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Toroidal Transformer

We mount the premium toroidal transformer centrally, to reduce flux or magnetic disturbance from the volume pot.

  Dynamic Thermal Tracking transistors

The output power transistors used by the CXA60 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can re-bias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA60 is always running at optimum performance.

Musical Subwoofer output

If you want to use a subwoofer as part of your speaker complement, the CXA60 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3kHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.

Fully balanced signal management

Thereʼs some revolutionary signal management happening beneath the lid of the CXA60. For the first time, our engineers decided to go fully balanced rather than single-ended all the way through. As a consequence, any noise that that might be picked up in the audio signal while routing through the amplifier is cancelled before itʼs output.

Reinventing the signal path

The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet. Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA60 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well.

 

Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences. This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier. We can hear very clearly what each of those components is doing.

This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.

 

Bespoke Bluetooth

If you want to use your CXA60 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100 is done in-house. We even include an extension cable which enables you get the best Bluetooth range.

Embracing classic design

Sometimes thereʼs a good reason to keep things uncomplicated. The CXA60 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA60 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA60 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.


   
  • Power output:60W RMS into 8 Ohms, 90W RMS into 4 Ohms
  • DAC:Wolfson WM8740
  • Frequency Response:

Ti 120 SIGN.
Special power and output transformer
from BHS uk and Mundof M-Cap
signal capasitors
Integrated tube amp.Four line inputs.
2X12AU7, 4x KT 88, 2x12AX7
2x6SN7 75 Wrms per chan.4-8 ohm.
Class AB push-pull.Remote control inc.
Negative feedback on/of switch.

 

echnical specification
 

 

 

Integrated Amplifier

Frequency response:

10 Hz - 50 kHz (± 0.5 dB)

Total harmonic distortion (THD):

1 % (1 kHz)

Signal-to-noise ratio:

92 dB

Input Impedance:

100 kOhm

 

 

Vacuum tube:

4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7

Dimensions W x H x D:

440 x 220 x 390 mm

Weight:

28 kg

Accessories:

Remote Control

Input Terminals:

Tape, CD, AUX, Tuner

Output terminals:

Tape out

Circiut:

Class A/B P.P.

Colour:

Chassis chrome, transformer black

Colour front:

black, silver

Sensitivity

590 mV

Output Impedance:

4 Ohm, 8 Ohm

Power Output:

2 x 70 Watt @ 1 % THD

Consumption:

max. 380 Watt

Highlights

switchable reduction of feedback

 

High rigidity metal frame
Shielded high current power supply
• 500VA toroidal transformer
• 80.000uF capacitor bank
• Rubber insulated aluminium feet
• WBT connector on unbalanced input
• Neutrik connector on balanced input
• Fully discrete analogue design
• Onsemi MJL1302/3281 power transistor
• Low overall feedback
• High stability on capacitive loads
• White Gold cable on output connection
• 100W/8Ohm power unit and double the
power on 4 Ohm until 390W on 2Ohm; a
big power reserve that allows to drive any loudspeakers even in a big room.

Technical Specifications

Continuous power output, per channel, 8Ω

  • Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
  • Single, 4Ω, at 1kHz - 400W

Inputs

  • Nominal sensitivity  for 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
  • Input impedance - 10kΩ
  • Frequency response 20Hz-20kHz +/- 0.05dB
  • Signal/noise ratio (Awtd) 50W / 8Ω - 110dB

General

  • Power consumption (standby) -

Choosing the DAC

Both our CXA60 and CXA80 amplifiers employ the same Wolfson WM8740 DAC, and thereʼs a very good reason for that: it sounds superb! There are more recent Wolfson DACs in circulation, however none sound quite as great as the WM8740 in our view. Which is why, time and again, we choose them.

  Two-into-one transformer

The CXA80 utilises two separate windings on the oversize toroidal transformer. In effect, this is like having two toroidal transformers wound onto one chassis, providing separate windings for each amplification module. If you get a huge transient in the right channel, it wonʼt unsettle whatʼs going on in the left. The current is being drawn from a different path, rather than a common path, so the output is stable and remains unflustered, whether your liking is for Little Richard or Lamb of God.

Dynamic Thermal Tracking transistors

The transistors used by the CXA80 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can rebias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA80 is always running at optimum performance.

Musical Subwoofer output

If you want to use a subwoofer as part of your speaker complement, the CXA80 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3KHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.

Reinventing the signal path

The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet.

 

Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA80 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well. Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences.

This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier.We can hear very clearly what each of those components is doing.

 

This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.

High resolution asynchronous USB

In order to offer 24-bit 192kHz resolution via asynchronous USB we use a specialist XMOS device dedicated to the USB input. Weʼve also written a custom driver to allow PC users to access the higher sample rates available in USB Audio 2 mode. This bespoke code allows us to stream audio files at the highest possible resolution.

Bespoke Bluetooth

If you want to use your CXA80 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100, including the aptX implementation, is done in-house. We even include an extension cable which enables you get the best Bluetooth range.

Embracing classic design

Sometimes thereʼs a good reason to keep things uncomplicated. The CXA80 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA80 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA80 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.

 

 

  • Power output:80W RMS into 8 Ohms, 120W RMS into 4 Ohms
  • DAC:Wolfson WM8740
  • Frequency Response:

ΣΤΕΡΕΟΦΩΝΙΚΟΣ ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ MM7025
• 2 x 140W RMS 8 ohm •Αρμονική παραμόρφωση 0,03% (20HΖ-20KHZΜέτρο ισχύος σε κυκλική θέση  • Κύκλωμα Ανατροφοδότησης Ρεύματος • Ισορροπημένες είσοδοι • Επιχρυσωμένοι ακροδέκτες ηχείων • Είσοδοι ελέγχου DC trigger • Απομακρυσμένος δίαυλος της Marantz • Διαστάσεις: 440 x 352 x 126 mm • Βάρος 10,5kg  • Διατίθεται σε μαύρο χρώμα

First Impressions

If youʼre impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting – and very positive – impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any décor.  The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace” view of the amplifierʼs operating status.

ColorBlack
Front PanelAluminum/Glass-reinforced resin
Remote Control
Power RequirementAC 120V 60Hz
Power Consumption330W (Standby: 0.2W)
Dimensions W x H x D (Inchs)17-3/8 x 4-15/16 x 13-7/8
Weight (lbs)23.8

 

 

Weight8.30 kg28.00 kg18.00 kg20.00 kg9.00 kg12.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 8.30 kg
Βάρος 28.00 kg
Βάρος 18.00 kg
Βάρος 20.00 kg
Βάρος 9.00 kg
Βάρος 12.00 kg