| Content |
36 x 3 W LED RGB PAR Can in black housing
Extremely high-powered LED PAR in a black, short housing. Equipped with dual brackets and a filter frame holder. The Cameo CLP64RGB3WBS has a total of 36 ultra-bright 3-watt LEDs (12 x red, 12 x green, 12 x blue) - for perfect colour mixing and rich solid colours. The beam angle is 30 degrees.
It is operated using three buttons and an LED display on the back.
The CLP64RGB3WBS is equipped with a super-quiet fan for cooling.
There are three operating modes. In addition to DMX operation with 2, 3, 4 or 6 channels, this LED PAR can also be operated in standalone mode or via sound control. It has a built-in microphone.
The CLP64RGB3WBS has a power consumption of just 150 watts, runs on mains voltages of 100 to 250 volts, and thus can be used universally and worldwide.
- Type: PAR 64
- Colour spectrum: RGB
- Number of LEDs: 36
- LED type: 3 W
- Beam angle: 30°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin male
- DMX mode: 4-channel, 6-channel
- DMX Functions: Colour fade, colour jump, master dimmer, RGB, sound control, strobe
- Standalone modes: Colour change, colour fade, slave mode, sound control, static colour
- Controls: Mode, Value Down, Value Up
- Indicators: LED display
- Power supply: 100 V AC - 250 V AC
- Power consumption: 150 W
- Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
- Housing material: Aluminium
- Housing colour: black
Dimensions without mounting bracket
- Width: 260 mm
- Height: 270 mm
- Length: 305 mm
|
The Cameo CLPFLATPRO12 professional PAR light's super slim design thanks to its convection cooling construction makes it most suitable where space is limited and silent operation is required. 12 high performance 10 watt LEDs produce impressive RGBWA colour mixes from soft pastel hues to rich, warm tints with 16,000 lux and a 30° beam angle while the 3,000 Hz refresh rate eliminates flicker.
The CLPFLATPRO12 features 5 DMX modes with numerous functions, integrated programs and a built-in microphone for sound control. The illuminated LC display with 4 controls facilitates manual operation. The CLPFLATPRO12 also provides master, slave and standalone capability.
The Cameo CLPFLATPRO12 sports a black die-cast enclosure with both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. Its multifunctional bracket allows for a wide variety of mounting solutions.
- Colour Range: RGBWA
- Number of LEDs: 12
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: illuminated LC-Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 140 W
- Power Connector: Neutrik PowerCon in/out
- Housing Material: Metal
- Housing Colour: Black
- Type of cooling: Convection
- Illuminance (lx 1m): 16000 lx
- Dimensions (without mounting bracket): 230 x 230 x 135 mm
|
Πληροφορίες
LED προβολέας αλλαγής χρωμάτων RGB 12°, χρώματος ασημί, με 12 τεμ. Luxeon Power LED (1Watt), dimmer, άπειροι συνδυασμοί χρωμάτων, strobe effect, 4 αυτόνομα προγράμματα, λειτουργία master/slave. Λειτουργεί με 6 κανάλια DMX 512. Bάρος: 3,5kg.
|
Featuring 7 high performance 10 watt LEDs, 30° beam angle and 3,000 Hz refresh rate, the Cameo CLPFLATPRO7 professional PAR light allows for stunning RGBWA colour mixing. The super slim design is totally noise free thanks to its convection cooling construction and thus perfect wherever space is limited and quiet operation is a must.
With 5 DMX modes, numerous functions, integrated programs and a built-in microphone for sound control the CLPFLATPRO7 produces a huge range of colours from soft pastel hues to rich, warm tints. It incorporates an illuminated LC display with 4 controls for easy manual operation and provides master, slave and standalone capability.
The black die-cast enclosure includes both 3-pin and 5-pin XLR inputs and outputs for the DMX signal and Neutrik PowerCon sockets for mains supply and daisy-chaining. The Cameo CLPFLATPRO7's multifunctional bracket design offers a wide variety of mounting options.
- Colour Range: RGBWA
- Number of LEDs: 7
- LED Type: 10 W
- Beam Angle: 30°
- DMX Input: XLR 3-pole, XLR 5-pole
- DMX Output: XLR 3-pole, XLR 5-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA, Sound Control
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Sound Control, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: illuminated LC-Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 100 W
- Power Connector: Neutrik PowerCon in/out
- Housing Material: Metal
- Housing Colour: Black
- Type of cooling: Convection
- Illuminance (lx 1m): 12000 lx
- Dimensions (without mounting bracket): 180 x 180 x 133 mm
|
Ultra-high performance LED PAR 64 with 18 ultra-bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 80 Watts. Like all new LED PAR cans, the CLP 64 TRI 3 WBS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 80 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Integrated microphone for sound control
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Fan
- Sturdy aluminium housing with polished or black finish
Specifications - Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Black
- Dimensions (without mounting brackets): 260 x 280 x 300 mm
|
Ultra-high performance LED PAR 56 with 9 extremely bright 3-Watt TRI colour LEDs in a black housing. This high-performance LED PAR has a beam angle of 25 degrees and a power consumption of just 50 Watts. Like all new LED PAR cans, the CLP 56 TRI 3 WPS features a sturdy housing. The double bracket makes this PAR can the ideal lamp for use as a floor PAR or for mounting to cross-beams and bars.
It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave or standalone mode (sound control, colour change, solid colours). It features an integrated microphone and is quick and easy to operate using four buttons and an LED display.
- 9 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- Low power consumption of just 50 Watts
- Operated via DMX (6 channels), in master/slave mode or standalone mode
- Simple to operate using the four buttons and LED display
- Double bracket included as standard
- Cooling method: Heat sink
- Sturdy aluminium housing
Specifications - Product: LED Par Can
- Type: PAR56
- Colour Range: RGB
- Number of LEDs: 9
- LED Type: 3 W TRI Colour
- Beam Angle: 25°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Value Up, Enter, Value Down
- Indicators: LED Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 50 W
- Power Connector: Schuko
- Housing Material: Aluminium
- Housing Colour: Black
- Dimensions without mounting bracket): 230 x 250 x 260 mm
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.