Content |
Μηχανή εφέ haze, με έξοδο 3.500 cfm, 2 κανάλια DMX, είσοδοι 3/5 pin XLR, χωρητικότητα δοχείου 3.5l, χρόνος προθέρμανσης 2 λεπτά, Διαστάσεις 546 x 627 x 203 mm Βάρος 18.7kg
Χαρακτηριστικά:
- 2 κανάλια DMX
- Ισχύς 760W 6.3A, 250W 5A
- Είσοδοι: 3/5 pin XLR
- Χωρητικότητα δοχείου: 3.5l
- Κατανάλωση 15ml/min
- Χρόνος προθέρμανσης 2 λεπτά
- Βάρος 18.7kg
- Διαστάσεις 546 x 627 x 203 mm
|
UNIQUE 2.1
The revolution DMX as standard, variable output and haze density, minimal warming up time, easy handling, very low fluid consumption – these are only some of the features of the UNIQUE 2.1.
In general
The haze machine UNIQUE 2.1 offers - among the features that already characterised the Unique 2 - an even more silent working.
The sound could be absorbed tremendously. Thus, the machine can be used in fields of operation where any sound is undesirable.
Due to the efficient fan, the haze can be distributed in the room quickly. A replaceable filter protects the fan against dirt.
With its variable output - whereas the haze density and also the output can be varied - the machine can be used in many fields: Any desired effect - from the finest mist to a thick haze, similar to fog - can be achieved. Therefore the machine is able to fill small and big rooms or halls with a constant haze, creating the right atmosphere and excellently supporting lighting effects.
Features
Minimal warm up time
The very short warming up time of approx. 60 seconds means the UNIQUE 2.1 is ready for operation almost immediately. A continuous output is guaranteed by the fact that the machine does not have to warm up during operation.
Variable output
The pump and the fan of the machine can be adjusted separately in 99 steps. Thus the user is able to adjust the density and output exactly. A non-linear pump regulation make sure that the pump can be adjusted much better at the lower steps.
Minimal niose
Due to the fact that the pump and the fan can be dampened, the sound of the UNIQUE 2.1 can be absorbed tremendously. The machine can be used in fields of operation where any sound is undesirable.
DMX 512 as standard
The UNIQUE 2.1 can be controlled via DMX 512. Pump and fan can be adjusted separately. The connection is done with 5-pin-XLR plugs using two following control channels at the desk. The DMX start address will be adjusted and saved with the buttons at the display. It will remain saved even if the machine is disconnected from the mains supply.
The machine can also be controlled analog (0 - 10V) via a lighting desk and/or via cable remote (option). The fan will be adjusted directly at the machine, the pump can be adjusted via the analog desk or remote. This connection is done with 3-pin-XLR plugs.
A stand-alone running is also possible. The adjustments are done directly at the machine.
Internal Timer
With the internal Timer the haze time can be adjusted in Seconds, the wait time in Minutes and the output of the pump and fan in %.
Haze-Density Control System (HDCS)
With the HDCS an individual Profile for a Show can be programmed. Two Levels with the required pump and fan values along with a haze time can be adjusted. Additionally a pre-runtime can be programmed.
Buttons and LED\'s
The control of the pump and fan, the adjusting of the DMX start address and also the adjusting of the Timer and the HDCS is achieved with buttons. The adjusted data can be read at the LED-Display.
Controlled by Microprocessor
The intelligent control of every single parameter by microprocessor guarantees trouble free operation of the machine.
Minimal fluid consumption
A special fluid guarantees minimal fluid consumption, low running costs and an optimal haze effect. It is supplied in 2l, 10l- and 25l-canisters and in barrels with 220l.
One of the 2l-canisters guarantees up to 50 hours of continuous output.
Advantages
- Minimal warm up time of only 60 seconds
- Minimal noise
- Pump and fan adjustable separately in 99 steps, therefore variable output (from the finest mist to a thick haze, similar to fog)
- Internal fan ensures quick and homogen distribution
- DMX as standard, analog (0-10V) and stand-alone running
- Control of the pump, fan and the adjusting of the DMX start address is achieved with buttons
- Internal Timer
- Haze-Density Control System
- Minimal fluid consumption (2l canister guarantees up to 50 hours continuous output)
- Made in Germany
Technical data
Procedure
|
Haze generator without compressor
|
Power requirement
|
1500 Watt |
Voltage (depends on the voltage in the country)
|
230 V / 50 Hz 120 V / 60 Hz . 90 V / 50 Hz |
Warm up time
|
approx. 60 sec. |
Fluid tank capacit/ Fluid consumption
|
2 l for up to 50 hrs cont. output |
Internal fan
|
> 6000 l / min. |
Haze density |
adjustable in 99 steps
|
Control
|
DMX 512 0 – 10 V analog Cable remote (option)
|
Dimensions (L x W x H)
|
47 x 25 x 25 cm |
Weight without can
|
approx. 8.7 kg |
Accessories
- XLR-remote for analog control
- Diverter to divert the direction of the output
- Hanging set
- Flightcase
|
HZ-400
Professional Hazer
The HZ-400 is the ultimate professional Hazer for indoor/outdoor use, on stage, theatre, television etc. The HZ-400 uses a compressor-system and is therefore much quieter than most of the other haze-machines.
Technical Info
Tank capacity: 2,5 L
Fluid type: Hazer Fluid
Fluid consumption rate:
DMX: Yes
Dimensions:
Weight: 18,5 kg
Connectors dmx: 5 Pin XLR
Accessories/ordering info:
Remote: Timer remote (included)
Output: 2000 cu. ft/min.
|
MDG Atmosphere H.O. Haze Machine 1415W
Extremely quiet output with the longest hanging times
? Continuous or momentary haze emission
? Automatic Purging System (APS) to prevent build-up and clogging
? Compatible with remote control timer and DMX interface
? Detachable remote control and 8 m (26 ft) cable included
Increased output for larger venues Extra-large fluid capacity (6.5 L/1.7 US gallons) Up to 60 hours of running time
ATMOSPHEREAPS H·O· 110 ml (3.7 oz) 0.36 kg (0.8 lb) 6.5 L (1.7 US gallon) Standard feature Pure white 0.5-0.7 microns 60 hours 8 minutes MDG Neutral Fluid 115 or 230 VAC, 50/60 Hz 1,415 W 48.8 dB (A) 81 cm (32?) 28 cm (11?) 30 cm (12?) 30 kg (66 lb) 45 kg (95 lb) CE approved, CSA and UL pending |
The American DJ Entour Faze is a water-based fog machine that creates 1000 ft³/minute of haze for misty atmospheres designed to enhance patterns from your light show in theaters, clubs, houses of worship, and more.
Offered as an alternative to oil-based fog machines, it features a 450W heating element that continually reheats to ensure a stable temperature. The result is an even mist right out of the machine rather than big bursts of cloudy fog that could obscure your lights.
Other features include an LED heating-status indicator, an automatic circuit cutoff to protect the pump if the fog fluid tank runs dry, and a convenient carrying handle. Operate the Entour Faze using the built-in manual controls or via the included Entour VT-1 wired remote, which has a 25' cable with a 1/4" connector. The Entour Faze also supports DMX control with its three DMX channel modes (1, 2, and 4) and XLR 3-pin I/O. A dual hanging bracket system is supplied to allow for precise positioning.
- 450W faze μηχανή με DMX protocol
- Τεχνολογία ταχείας θέρμανσης - έτοιμη για χρήση σε 45 δευτερόλεπτα
- Χρησιμοποιεί τυπικό υγρό ομίχλης με βάση το νερό
- Haze Output: 4000 cubic feet per min (fan and volume full on)
- Κατανάλωση υγρών: 4,5 ml ανά λεπτό
- Αυτόματη διακοπή κυκλώματος για την προστασία της αντλίας αν η δεξαμενή υγρού ομίχλης είναι στεγνή
- Χωρητικότητα δεξαμενής: 3 λίτρα
- DMX Channels: 1, 2 or 4-channel mode
- Σύνδεση: 3-pin XLR In/Out
- Ψηφιακή οθόνη με ενσωματωμένα χειριστήρια
- Κατανάλωση ισχύος: 465W
- On/Off Switch
- Faze trigger switch
- Safety eye
- Περιλαμβάνει σύστημα διπλού βραχίονα στήριξης για διαφορετικές γωνίες και βέλτιστη θέση της μηχανής
- Περιλαμβάνει ενσύρματο τηλεχειριστήριο με output volume, red power on LED και green ready indicator
Fog Output |
1000 ft³ / 28.3 m³ per minute |
Tank Capacity |
0.8 gal / 3 L |
Warm-Up Time |
40 seconds |
Compatible Fluid |
Water-based fog fluid |
Fluid Consumption |
4.5 mL/minute |
Heater |
450 W |
DMX Connectors |
Input: XLR 3-pin male
Output: XLR 3-pin female |
DMX Channel Modes |
1, 2, and 4 |
Power Requirements |
120 VAC, 60 Hz |
Power Consumption |
465 W |
Dimensions |
16.3 x 8.0 x 11.9" / 41.4 x 20.2 x 30.3 cm |
Weight |
10 lb / 4.5 kg |
|
- Highly efficient heating element (600 W), preheating: approx. 2 mins
- Bicolour 0.8 l illuminated tank with level indicator
- Output volume: 226 m³/min (max.)
- Fluid use: only 3.5 ml/min @ 100% output performance
- Easy configuration via LED display, DMX or standalone
- Suitable for water-based hazer fluids (e.g. Cameo Haze Fluid)
- Removable fluid tank for easy refilling
- Built-in overheating protection
- Adjustable output angle with deflector
- Includes mounting bracket and remote control
A perfect light show requires evenly distributed fog. The Cameo PHANTOM H2 600 W compact hazer is perfect for this. It produces small fog volumes that are output evenly throughout the duration of its use, thereby preventing thick clouds! The professional execution of sophisticated lighting effects is efficiently realisable for private event technicians, musicians and DJs with this hazer, while its robust design makes it especially attractive to rental companies.
Perfect hazer effects are achieved by its optimally attuned components. The highly efficient heating element facilitates a short preheating time of around 2 minutes and achieves a maximum output volume of 226 m³/min. At the same time, the device consumes a maximum of 3.5 ml of fluid per minute and is suitable for use with environmentally-friendly water-based haze fluid. The bicolour illuminated tank holds 0.8 litres for plenty of available fluid and features a level indicator. Refilling doesn\'t have to be done at the device as the tank can be easily removed and put back in after filling.
Configuration can be done via the clearly designed LED display and the device can be operated using DMX or the remote controller via a 10 m cable. Built-in overheating protection ensures operational safety.
Even once the hazer has been installed, its output angle can still be adjusted. This is achieved with the deflector, which allows for improved combination of the hazer output and lighting without having to change the hazer setup.
Once it has been installed using the included bracket, the appealing design of the Cameo PHANTOM H2 600 W compact hazer, with bicolour black/cool grey metal housing, makes it an attractive addition to any stage and lighting setup.
Product type
hazer
Type
hazer
Power
600 W
Output volume
ca. 226 m³/min
Warm-up time
ca. 2 min
Fluid tank capacity
0.8 l
Fluid Consumption
ca. 3.5 ml/min
Remote connection
DIN 5-Pol male
Remote cable length
10 m
Remote functions
Interval , Output , Wind set
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
2-channel
DMX Functions
Fan speed , Haze emission
Controls
Down , Enter , Mode , Up
Indicators
4-digit LED display
Operating voltage
230 V AC / 50-60 Hz
Fuse
F5AL / 250 V
Power consumption
620 W
Power connector
CEE 7/7 , Fixed connection cable
Ambient temperature ( in operation )
5 - 40 °C
Relative Humidity
< 85 %, not condensing
Housing material
metal
Cabinet colour
Black , grey
Width
242 mm
Height
187 mm
Depth
275 mm
Accessories (included)
4 rubber feet , Cable remote , canister
Weight
7,14 kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.