Content |
CA 12
The CA12 professional power amplifier is designed to achieve unsurpassed sonic performance and long-term reliability--even when operating under extreme stress--in touring or fixed installation applications. Application The CA? series provides tremendous value in proven amplifier technology.CAs form the backbone of discriminating rental systems and high-power club installations worldwide. Auditoriums, churches, regional tour sound companies and mobile DJs are all ideal candidates for the CA Series? combination of value and sonic quality. Design Focus The CA Series design provides economical access to the premium sound quality of the Crest Audio Pro Series. Professional power-handling capabilities and exceptional low-end response make this amplifier an ideal choice for installations and touring applications that demand the finest audio quality.
FEATURES: 8 Ohm Stereo - 700 W 4 Ohm Stereo - 1200 W 2 Ohm Stereo - 1400 W 8 Ohm Bridged - 2400 W 4 Ohm Bridged - 2800 W Legendary over-built power supply Toroidal power transformer Latest generation of high-speed, wide-bandwidth output devices Twin-tunnel cooling with back-to-front air flow Dual, rear-mounted, continuously variable-speed fans Balanced male and female XLR inputs with switch-configurable XLR polarity and sensitivity selection Speakon? or five-way binding post output connectors (market dependent) Stereo, parallel, bridged-mono mode selector switch Ground-lift switch Front panel circuit-breaker switch Recessed, stepped attenuators SIGNAL present/active, PROTECT, and ACL LED's Modular construction Powder-coated steel chassis Five-year warranty Dimensions 19" W x 5.25" H x 15" D (483 mm x 134 mm x 381 mm) Weight 67 lbs. (31 kg) |
Τελικός ενισχυτής 2U τάξης Η ισχύος 2 Χ 1400 Watt/4Ω με απόκριση συχνότητας 10Hz - 30KHz. Βάρος 14,2 Kg. Με LCD πάνελ για χειρισμό και έλεγχο, 11 στάδια προστασίας και slot για την κάρτα RCM-26. |
The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)
Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted
|
Number of Channels: 2
Output Power: (per channel)
8 ohms 575W
4 ohms 1025W
2 ohms 1750w
Output Power: (bridged)
8 ohms 2050W
4 ohms 3500w
THD%: (@1dB below max output)
@ 1kHz |
Single digital (Class D) amplifier with switching power supply 1200W/70V/100V. Protection against overheating, overcurrent and short circuit output. Features & priority entry program (program override) for message playback emergency. Highpass filter OFF/200Hz/400Hz. Remote control function ON / OFF. Power Supply DC 24V, AC 220 ~ 240V 50/60Hz. |
Επαγγελματικός ενισχυτής QSC 2x800W RMS @ 8Ω, 2x1300W RMS @ 4Ω, 2x1600W RMS @2Ω, bridged 4000W RMS @ 4Ω. Διαθέτει εισόδους 3-pin Euro-style detachable terminal block και XLR (pin 2+), touch-proof binding posts και Neutrik® Speakon®. Επίσης διαθέτει πάνελ ρυθμίσεων με dip switches 10 θέσεων. Προστασίες short circuit, open circuit, υπερθέρμανσης, ultrasonic, RF, σταθερή απόδοση ανεξαρτήτως φορτίου και turn on/off muting. Διαστάσεις: 132 x 483 x 404 mm, Βάρος 30,8kg.
Ισχύς (Stereo Mode):
2x850W @ 8Ohm (FTC 20Hz- 20kHz, 0,1%THD)
2x1300W @ 8Ohm (EIA 1kHz, 0,1%THD)
2x1400W @ 4Ohm (FTC 20Hz- 20kHz, 0,1%THD)
2x1600W @ 4Ohm (EIA 1kHz, 0,1%THD)
2x2000W @ 2Ohm (EIA 1kHz, 0,1%THD) - Ισχύς (Bridge Mode):
2800W @ 8Ohm (FTC 20Hz- 20kHz, 0,1%THD)
4000W @ 8Ohm (EIA 1kHz, 0,1%THD)
Signal to Noise, 20Hz-20kHz, 8Ohms: >-100dB
Ευαισθησία εισόδου @ 8Ohms: 1,42V (+5.3 dBu)
Voltage Gain @8Ohms: 64x (36dB)
Output Circuitry: 3-tier Class H
Απαιτήσεις ισχύος (230V)
- 1/8 power pink noise at 4 ohms: 20,1 A
Παραμόρφωση (SMPTE-IM): |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.