CROWN CT-875 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 8x75W/8Ω

Τελικός ενισχυτής 4x75W/8Ω. Ευαισθησία 1.4V -
Απόκριση συχνότητας (at 1W into 4/8 ohms) ±
0.5Db-Crosstalk (below rated power 20Hz to
1kHz) > 70dB S/N110dB-THD 55dB, typically
> 70dB. Διαστασεις: 1.75" x 19" x 14.25“.
Κατάλληλος για μόνιμες εγκαταστάσεις, 1U rack.
Βάρος 4,5kg.

The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon) 

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

Παραµόρφωση: THD 20Ηz - 20ΚΗz στο 1W 112d ΒΑ
Class TD µε Ρυθµιζόµενο Switch Mode R.SMPS
VPL Voltage Peak Output Ρύθµιση Bridge-mode,
∆υνατότητα λειτουργίας µε τάση 130 - 260Volt,
Προστασία: AFS, VHF, Θερµική, DC, RFI, Υπέρτασης, Βραχυκυκλώµατος,
Ανοιχτού Φορτίου
2xRJ45 EtherCon Σύνδεση για έλεγχο µε υπολογιστή µε το σύστηµα
NomadLink Network ή µε το NLB 60Ε
Ισχύς Εξόδου: 4x1300W RMS /8Ω - 4x2100W RMS /4Ω -
4x2500W RMS /2Ω
2x4200W RMS /8Ω - 2x5000W RMS /4Ω
∆ιαστάσεις / Βάρος: 483x88x396mm / 12kg

Very high power  and  channel density  –   •   The  four-channel  FP
10000Q delivers a  total of 10000 W  (4 x 2500 W @ 2 ohms)  in
only 2U
Four-channel fexibility –   •  Four channels in one cabinet increases
effciency, fexibility and value  in powering monitor systems,  line
arrays, and bi- or tri-amped systems. Adjacent channels bridgeable
for 2- or 3-channel operation
Lab.gruppen  sound  quality  –   •   FP  10000Q  amplifers maintain
the impeccable sonic performance standards set by the original fP
Series, with the same durability and even greater effciency
NomadLink   • ®  network  ready  – Monitoring  and  control  of  key
functions accessible via the  intuitive DeviceControl software and
the robust, daisy-chained NomadLink® network
Patented  Class  TD  amplifer  topology  –    • Road-proven  output
stage delivers Class B audio quality with Class D effciency 

Regulated  Switch Mode  Power  Supply  (R.SMPS)  –    • Output
power remains constant even with signifcant drops in the mains
voltage
Effcient cooling system –   •  Unique, lightweight Intercooler® cop-
per cooling system dissipates more heat to allow extended peak
output
Adjustable parameters –   •  Selectable Gain, scalable Voltage Peak
Limiter (VPL), and bridge-mode operation allow custom confgura-
tion for any system or application
XLR input connectors   •
Heavy-duty binding post or Speakon output connectors   •
Comprehensive  protection  and warning  –   •   Excessive  output
current, DC, high  temperature, very high  frequency  (VHF), short
circuit, open load, mains fuse protection, and soft start

Τελικός ενισχυτής Class I 4x3500W /4Ω-1x 8200W bridge 8Ω (1kHz 20msec burst). Διαθέτει full colour ΤFT-LCD οθόνη με DSP BSS Omnidrive HD 24bit-192khz. FIR και ΙIR Filters. Levelmax RMS Limiters. Είσοδοι XLR-AES3-HiQnet-Vdrive-Cobranet- διαχειρίσιμες μέσω matrix σε κάθε έξοδο. USB port. Έλεγχος μέσω SystemArchitect-HiQnet. Διατάσεις ΥΠΒ 8.9 Χ 48.3 Χ 43.1cm. Speakon version. Bάρος 13.2 κιλά.

Τελικός ενισχυτής 4x75W/8Ω. Ευαισθησία 1.4V -
Απόκριση συχνότητας (at 1W into 4/8 ohms) ±
0.5Db-Crosstalk (below rated power 20Hz to
1kHz) > 70dB S/N110dB-THD 55dB, typically
> 70dB. Διαστασεις: 1.75" x 19" x 14.25“.
Κατάλληλος για μόνιμες εγκαταστάσεις, 1U rack.
Βάρος 4,5kg.