The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 800 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).
Crown XLI 800:
Reasonably priced, robust and powerful power amplifier
Robust and analogue circuit
LED display for each channel for signal, clip and error
Stereo, bridge and parallel modes
Conventional power supply
Performance: 2 x 200 Watts / 8 Ohms, 2 x 300 Watts / 4 Ohms
Inputs: Cinch, XLR
Outputs: 2 x speakon, spring clip
Robust 19 inch housing
Height: 2 U
Specifications
XLi800
XLi1500
XLi2500
XLi3500
Channels
2
2
2
2
Sensitivity (full rated power at 8 ohms)
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)
> 100 dB
> 100 dB
> 100 dB
> 100 dB
Total Harmonic Distortion (THD) (20Hz – 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)
= /
= /
= /
= /
Frequency Response (at 1W, 20Hz – 20kHz)
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
Crosstalk (below rated power)
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 20kHz: – 59 dB
at 20kHz: – 59 dB
at 20kHz: – 59 dB
at 20kHz: – 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)
> 200
> 200
> 200
> 200
AC Line Voltage and Frequency Configurations (± 10%)
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
Dimensions (H x W x D)
3.5″ x 19″ x 12.4“
3.5″ x 19″ x 12.4“
3.5″ x 19″ x 12.4“
3.5″ x 19″ x 14.4“
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 366mm)
Net Weight
25.1 lb (11.4 kg)
28.0 lb (12.7 kg)
29.7 lb (13.5 kg)
43.0 lb (19.5 kg)
Net Shipping Weight
29.5 lb (13.4 kg)
32.4 lb (14.7 kg)
34.2 lb (15.5 kg)
47.4 lb (21.5 kg)
Βάρος
5.00 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “CROWN XLi-800 Tελικός ενισχυτής 2x300W/4Ω-1x1600W/bridge 8Ω-2x200W/8Ω-2U Rack” Ακύρωση απάντησης
Crown XLI 800
The Crown XLI 800 is a reasonably priced but robust and powerful power amplifier. It ideally suits the use in budget-oriented applications at both mobile and stationary areas. It offers a power of 2 x 300 Watts at 4 Ohms. Thereby, the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 800 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it owns three different, selectable modes (stereo, bridge and parallel).
Crown XLI 800:
Reasonably priced, robust and powerful power amplifier
Robust and analogue circuit
LED display for each channel for signal, clip and error
Stereo, bridge and parallel modes
Conventional power supply
Performance: 2 x 200 Watts / 8 Ohms, 2 x 300 Watts / 4 Ohms
Inputs: Cinch, XLR
Outputs: 2 x speakon, spring clip
Robust 19 inch housing
Height: 2 U
Specifications
XLi800
XLi1500
XLi2500
XLi3500
Channels
2
2
2
2
Sensitivity (full rated power at 8 ohms)
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)
> 100 dB
> 100 dB
> 100 dB
> 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)
= /
= /
= /
= /
Frequency Response (at 1W, 20Hz - 20kHz)
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
Crosstalk (below rated power)
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)
> 200
> 200
> 200
> 200
AC Line Voltage and Frequency Configurations (± 10%)
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
Dimensions (H x W x D)
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 14.4“
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 366mm)
Net Weight
25.1 lb (11.4 kg)
28.0 lb (12.7 kg)
29.7 lb (13.5 kg)
43.0 lb (19.5 kg)
Net Shipping Weight
29.5 lb (13.4 kg)
32.4 lb (14.7 kg)
34.2 lb (15.5 kg)
47.4 lb (21.5 kg)
The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W 2 Ohm
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.
The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs.
The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.
The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers
Type
PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W
Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W
Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W
Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W
Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W
Output circuitry
Class H
Frequency response
20 - 20000 Hz
THD
< 0.1 %
Signal-to-noise ratio
105 dB
Damping factor
> 400
Crosstalk
>80 dB
Gain
35 dB
Input sensitivity
0.75 V
Protection circuits
clip limiter , DC protection , short circuit , thermal overload
Power Without Compromises. The XB is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection- the XB is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX / Speakon LED Indicators for POWER, SIGNAL, CLIP, PROTECT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XB 800: 2x 400 W @ 4 Ohm Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.025% Signal-to-Noise Ratio: < 103 dB Channel Seperation: > 85 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Damping Factor: 500 @ 4 Ohm Cooling: 2x fan (temp. reg. variable speed) Weight: 13 kg/(29 lbs) Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
XB Series - Intelligent Power
Power Without Compromises. The XB is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection- the XB is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX / Speakon LED Indicators for POWER, SIGNAL, CLIP, PROTECT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XB 400: 2x 200 W @ 4 Ohm Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.025% Signal-to-Noise Ratio: < 103 dB Channel Seperation: > 85 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Damping Factor: 500 @ 4 Ohm Cooling: 2x fan (temp. reg. variable speed) Weight:12 kg /(26 lbs) Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
The high efficiency of the ED series enables maximum efficiency with low heat generation.
A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.
AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:
2 x 300 Watt rms
Power output stereo 8Ω:
2 x 180 Watt rms
Power output bridged 8Ω:
600 Watt rms
Frequency Response:
20 Hz ÷ 20 kHz
Signal/noise rate:
> 105 dB
Crosstalk:
> 70 dB
Distortion (THD+N):
Intermodulation:
Damping factor:
200:1 (8 Ω)
Slew rate:
50 V/μS
INPUT SECTION
Input connector:
2 x XLR balanced, 6,3mm jack unbalanced
Input sensitivity:
0 / 0.775 dBm/V RMS
Input impedance:
10.000 kΩ
Controls:
Volume control for each channel
OUTPUT SECTION
Output connector:
2 x Neutrik Speakon 4 ways
SYSTEM PARAMETERS
Cooling:
Two-speed fan
Protections:
Temperature, DC, RFI short circuit, Soft-Start thermal on transformer
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.