DAP AUDIO D1419 EL-2 Lavaliere Microphone

Miniature Lavalier Microphone for eclipse range. The DAP EL-2 is an omni-directional (no proximity effect) condenser microphone designed for voice pick-up and various applications. The wide dynamic range and frequency response provide a high quality sound. A clip for easy attaching to a tie, collar, dress, etc. is included.   Type: Back-Electret Condenser
Polar pattern: Omni
Freq. response: 60-15.000 Hz
Sensitivity (1000 Hz): 1 mv/Pa*
(*1 Pa = 94 dB SPL)
Max. SPL: 130 dB (1% THD)
Impedance: 2,2 kilo-Ohm ± 30%
Power supply: Phantom from Beltpack
Connector: 150 cm cable
with mini XLR
(male-type)
Net. Weight: 50 g
Dimensions: mic: Ø 5 mm x L 9 mm
Accessories: 2 x Windscreen
Mounting clip
1 protection bag 

Πρόκειται για ένα διακριτικό μικρόφωνο πέτου, ελαφρύ και άνετο στην εφαρμοφή του, ενώ παράλληλα παράγει καθαρό και ποιοτικό ήχο.
 
Στη συσκευασία περιλαμβάνεται:
 
Αntitrauma case
WS-LAV
Minifur LAV
Micon cable
LAV clip
Spanner

Tύπος    Πυκνωτικό
Πολικό Διάγραμμα    Omni
Απόκριση συχνότητας    60Hz - 18kHz
Ευαισθησία    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Αντίσταση    3000Ω
Διαστάσεις    4.50mmW x 12.00mmH x 4.50mmD
Βάρος    1.00gm
Αξεσουάρ    Αntitrauma case,WS-LAV, Minifur LAV, Micon cable, Spanner

• Πυκνωτικό μικρόφωνο πέτου omnidirectional, ευαισθησία 10MV/PA, 126dΒ MAX SPL, απόκριση συχνότητας 20Ηz-20kΗz. Phantom power 9V-52V. Βύσμα XLR. Κατάλληλο για broadcast και θεατρικές παραγωγές.

Δυναμικό μικρόφωνο κατάλληλο για πνευστα όργανα (φλαουτο, σαξοφωνο κ.λ.π.) , επίσης κατάλληλο για κρουστά

με λαιμό εύκαμπτο  και ευκολη τοποθέτηση σε όργανο για να έχει την μεγαλύτερη ηχητική απολαβή εξόδου.

The e 608 is a super-cardioid microphone ideal for almost invisible clip-miking
of woodwind (except certain Flutes), brass and drums. A newly developed clamp
and gooseneck mounting enables the capsule to be positioned close to the signal
source for high realism and high-level output.

Features
Rugged reinforced glass-fibre body
Shock-mounted capsule provides low sensitivity to impact and handling noise
Hum compensating coil
Extremely robust connection cable with XLR connector
Delivery Includes
1 e 608
1 microphone clip
1 pouch

Technical Data
Frequency Response  40.....16000 Hz 
Sensitivity in free field, no load (1kHz)  0,8 mV/Pa 
Min. terminating impedance  1000 Ohm 
Dimensions  d 17 x 185 mm 
Weight w/o cable  20 g 

Καλώδιο με βάση Χωρίς κάψα,

δέχεται τις κάψες R183/184/185

This miniature condenser microphone achieves full-sounding pickup and is known for outstanding consistency and dependable performance. Supplied with both a clothing clip and guitar mount, it provides natural and articulate vocal reproduction when used as a clip-on lavalier and excels in pickup of acoustic guitar. The PRO70 is designed to make music and speech clearly and comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
Natural and articulate vocal reproduction when used as a clip-on lavalier - clothing clip included
Excels in pickup of acoustic guitar with included instrument adapter
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Switchable low-frequency roll-off
Corrosion-resistant contacts from gold-plated XLRM-type connector
Operates on battery or phantom power
6\' (1.8 m) cable permanently attached between microphone and power module

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 100-14,000 Hz
Low Frequency Roll Off: 80 Hz, 8 dB/octave
Open Circuit Sensitivity: Phantom: -45 dB (5.6 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 200 ohms
Maximum Input Sound Level: Phantom: 123 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 96 dB, 1 kHz at Max SPL Battery: 96 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 67 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Off, on-flat, on-roll-off
Output Connector: Integral 3-pin XLRM-type
Cable: Integral 6\' (1.8 m), permanently attached between microphone and power module
Accessories: AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch