| Content | ER-1193
1 channel 193 Freq. PLL Receiver 822-846 MHz
2 Frequencies available:
790 - 814 MHz (Germany)
822 - 846 MHz
• 193 selectable UHF Frequencies.
• Available for 1 transmitter
• True diversity technology permits minimum dropouts in the RF link
• PLL synthesised technology for
multi-channels.
• Compact half-rack metal housing for
space saving
• "Lock-on" mode avoids accidental modification of frequency, sensitivity and power-off.
Frequency Preparation: PLL Synthesised Control
Carrier Freq. range: 600 MHz- 960 MHz
Frequency Stability: ±0.005%
S/N Ratio: >100 dB
Display: LCD
Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge
Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level
Audio Output Level: -12 dB
AF Output Impedance: 600 Ohm
Squelch: Pilot Tone & Noise Mute
Operation Voltage: 12-18 VDC, 500 mA
Output Connector: XRL Balanced/ 6,3 mm Unbalanced
Dimension: 211 x 152 x 40 mm (LxWxH)
|
The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.
(*1) 0 dB = 1 V | Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | | Power Consumption | 15 W or less | | Receiving Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Receiver Sensitivity | S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation) | | S/N Ratio | 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted) | | Tone Squelch Frequency | 32.768 kHz | | Infrared Receiver Input | 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals) | | Output | Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output. | | Frequency Response | 100 Hz - 12 kHz | | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Case: ABS resin, black | | Dimensions | 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“) | | Weight | 630 g (1.39 lb) (unit only) | | Accessory | AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4 | | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together) |
|
Type of Receiver Dual independent receivers, automatic-switching diversity
RF Carrier Frequency Range Band C - 541.500 MHz to 566.375 MHz
Approx. Working Range 300 feet
Overall Frequency Response 70 Hz to 15 kHz
Signal-to-Noise Ratio 115 dB at 40 kHz deviation (IEC-weighted), maximum modulation 75 kHz
# Of Channels 200 Channels
Type of Output(s) Unbalanced: 1/4" TS (“mono“) phone jack
Balanced: XLRM-type
Headphone Monitoring 1/4" TRS Phone
Power Requirements 100-240V AC 50/60 Hz; 8W
Battery Type/Approx. Life AC Powered Only
Display Back-Lit LCD Display & Battery / Signal Status LED
Mounting Options Table Surface / Rack Mountable rack ears included
Antenna Type BNC Flexible UHF
Dimensions 8.31 x 1.74 x 9.26" (211.0 x 44.0 x 235.0mm) (WxHxD)
Weight 2.4 lbs (1.1 kg)
Mounting Options Table Surface / Rack Mountable rack ears included
Antenna Type BNC Flexible UHF
Dimensions 8.31 x 1.74 x 9.26" (211.0 x 44.0 x 235.0mm) (WxHxD)
Weight 2.4 lbs (1.1 kg)
Transmitter AEW-T3300 Handheld Transmitter
Type of Transmitter Frequency Agile Handheld
Type of Input Connector Not applicable
Type of Microphone Condenser
Polar Pattern Cardioid
Interchangeable Mic Heads No
Battery Type/Approx. Life (2) 1.5v AA Alkaline not included
Mute Switch Power / Mute switch dual function
Level Control No
Antenna Type Internal
Display Back-Lit LCD Display & Battery / Signal Status LED
Dimensions 9.41 x 1.97" (239 x 50mm)(Length x Diameter)
Weight 9.5 oz (270 grams) without batteries
|
Πληροφορίες
Ψηφιακός δέκτης μικροφώνων 4 καναλιών.
|
Ασύρματος δέκτης module 6 συχνοτήτων για WA-1812, 1812C. Συνδυάζεται με τα WM-3210, 3220 χειρός, WM-3310 πέτου, WM-3310H κεφαλής |
With LDs' WS100-X it is simple to use at least 8 systems simultaneously without interferences. All systems transmit in the frequency range of 838 to 865 MHz. According to the order 91/2005 of the German federal network agency, these frequencies have been approved for professional uses �" without additional charges or a registration in Germany. Otherwise the systems are identical to the common WS100 systems working at a frequency range of 790,850 MHz. - 813,800 MHz. For the use of more than 4 systems we always recommend our WS100AD antenna splitter and our WS100DA directional antennas.
- 160-channel true diversity receiver with detachable antennas
- Blue LCD display with RF and AF level, group, channel and frequency display
- Convenient channel setting and setup with infrared ASC system
- True diversity display
- Professional outputs (balanced XLR connector and unbalanced jack socket)
- Noise suppression (Squelch) control on the back
- Jack/jack cable included
- Optional 19" rack mount with antenna cable and socket connectors available (LD WS 100 RK)
- Optional 19" quadruple antenna divider (LD WS 100 AD) and antenna amplifier (LD WS 100 AB) available
Technical Specifications:
LDWS100RX:
| Frequency Range: | 838 - 865 MHz | | Switching bandwith: | 0.250 MHz | | No. of channels: | 160 (10 groups of 16 CHN) | | Sensitivity: | -93 dBm for 30 dB SINAD, typical | | Image Rejection: | >60 dB | | S/N Ratio: | >90dB | | T.H.D: | 90dB A-weighted | | Dimensions: | 45 mm H, 212 mm L,160 mm D | | Weight: | 920 grams | | Power Requirements: | 12-18 V dc at 300 mA, supplied by external power supply |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.