DAP AUDIO D1905 ACX-2 Active Cross-over

Μη Διαθέσιμο

140.18 με ΦΠΑ 24%

Εξαντλημένο

CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Μη Διαθέσιμο Μη Διαθέσιμο Κωδικός προϊόντος: D1905 Κατηγορία:
• Servo-balanced XLR Inputs & Outputs • Simple and effective design • Output Mute switches • Linkwitz-Riley 24dB Octave filters   The ACX-2 is a stereo 2-way ore mono 3-way active crossover. The standard 19″ rugged rack mountable housing and high quality finish, good selection of high end components and great sound characteristics results in […]

 

Διαβάστε περισσότερα

• Servo-balanced XLR Inputs & Outputs
• Simple and effective design
• Output Mute switches
• Linkwitz-Riley 24dB Octave filters

 

The ACX-2 is a stereo 2-way ore mono 3-way active crossover. The standard 19″ rugged rack mountable housing and high quality finish, good selection of high end components and great sound characteristics results in a road proof active crossover.

Specifications Input Connectors: XLR
Input impedance: 20 KOhm balanced
Output connectors: XLR
Output impedance: 300 Ohm balanced
S/N Rate (A weight): >95 dB
Freq. response: 3 Hz – 40 kHz (+/-0.3 dB)
THD:
Crossover freq. range: 80 Hz – 10 kHz
Phase correct range: 0°-180°
Dynamic range: 115 dB
Filter type: Linkwitz-Riley, 24dB Octave
Controls: input levels, output levels, crossover frequency, mute switch
Indicators: input clip LED
Power: 230V AC, 50Hz
Dimensions: 483 x 135 x 45 mm (LxWxH)
Weight: 2,5 kg

 

Βάρος 2.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “DAP AUDIO D1905 ACX-2 Active Cross-over”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

DAP AUDIO D1905 ACX-2 Active Cross-over removeDBX VENU360 ΨΗΦΙΑΚΟΣ ΕΠΕΞΕΡΓΑΣΤΗΣ 3ΙΝ/6 3 IN x 6 OUT removeBSS BLU-160 NETW.SIGNAL PROCESSOR 4XDSP removeDBX ZONEPRO 1260 ΨΗΦΙΑΚΟΣ ΕΠΕΞΕΡΓΑΣΤΗΣ 12ΙΝ/6OUT COMMERCIAL DIGITAL removeLD Systems LDDPA260 6 Channel 19" DSP Speaker Controler removeYAMAHA SP-2060 Ψηφιακός Eπεξεργαστής Hχείων remove
NameDAP AUDIO D1905 ACX-2 Active Cross-over removeDBX VENU360 ΨΗΦΙΑΚΟΣ ΕΠΕΞΕΡΓΑΣΤΗΣ 3ΙΝ/6 3 IN x 6 OUT removeBSS BLU-160 NETW.SIGNAL PROCESSOR 4XDSP removeDBX ZONEPRO 1260 ΨΗΦΙΑΚΟΣ ΕΠΕΞΕΡΓΑΣΤΗΣ 12ΙΝ/6OUT COMMERCIAL DIGITAL removeLD Systems LDDPA260 6 Channel 19" DSP Speaker Controler removeYAMAHA SP-2060 Ψηφιακός Eπεξεργαστής Hχείων remove
Image
SKUD1905DBX VENU360Z-BLU160DBX ZONEPRO 1260LDDPA260H050.00020
Rating
Price 140.18 με ΦΠΑ 24% 1,154.00 με ΦΠΑ 24% 3,410.92 με ΦΠΑ 24% 1,150.00 με ΦΠΑ 24% 1,273.01 με ΦΠΑ 24% 2,079.00 με ΦΠΑ 24%
Stock

Εξαντλημένο

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΕξαντλημένοΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Διαβάστε περισσότερα

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

• Servo-balanced XLR Inputs & Outputs
• Simple and effective design
• Output Mute switches
• Linkwitz-Riley 24dB Octave filters

 

The ACX-2 is a stereo 2-way ore mono 3-way active crossover. The standard 19" rugged rack mountable housing and high quality finish, good selection of high end components and great sound characteristics results in a road proof active crossover. Specifications Input Connectors: XLR
Input impedance: 20 KOhm balanced
Output connectors: XLR
Output impedance: 300 Ohm balanced
S/N Rate (A weight): >95 dB
Freq. response: 3 Hz - 40 kHz (+/-0.3 dB)
THD: Crossover freq. range: 80 Hz - 10 kHz
Phase correct range: 0°-180°
Dynamic range: 115 dB
Filter type: Linkwitz-Riley, 24dB Octave
Controls: input levels, output levels, crossover frequency, mute switch
Indicators: input clip LED
Power: 230V AC, 50Hz
Dimensions: 483 x 135 x 45 mm (LxWxH)
Weight: 2,5 kg

 

Ψηφιακός επεξεργαστής ηχείων 3 IN x 6 OUT. Με νέο AutoEQ σύστημα αλγόριθμων. Διαθέτει είσοδο RTA για μικρόφωνο μετρήσεων, αντί ?μικροφωνικό σύστημα AFS, ισοσταθμιστή 31 περιοχών, παραμετρικό EQ 12 περιοχών (8 AutoEQs - 4 UserEQs), γεννήτρια υπό -αρμονικών χαμηλών συχνοτήτων, backline delay, Noise Gate, XLR είσοδοι - έξοδοι, 2 AES ψηφιακές είσοδοι (στις αναλογικές εισόδους 1&2), 6 έξοδοι μονοφωνικών ζωνών crossover, 8 περιοχών παραμετρικό EQ για κούρδισμα των ηχείων, θύρα Ethernet, USB, ασύρματη σύνδεση συμβατό με Android, iOS, Mac, Windows.

The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.

The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.

Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Features
  • Four Input / Output Card Slots
  • Configurable Inputs / Outputs
  • Analog Inputs (with Phantom Power per Channel)
  • Analog Outputs
  • Digital Inputs (AES/EBU and S/PDIF)
  • Digital Outputs (AES/EBU and S/PDIF)
  • Configurable Signal Processing
  • Rich Palette of Processing and Logic Objects
  • 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
  • Clear Front Panel LED Indication
  • Informative Front Panel Display
  • Bi-Directional Locate Functionality
  • 12 Control Inputs and 6 Logic Outputs for GPIO Integration
  • Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
  • HiQnet Device
  • Configuration, Control and Monitoring from HiQnet London Architect

DBX ZONEPRO 1260

Ψηφιακός επεξεργαστής αναγγελιών 4 ζωνών. Διαθέτει 12 in/6 out. Διαθέτει agc (automatic gain leveler)
EQ, crossover, limiter, compressor, noise gate, parametric EQ, security lockout, AFS περιοριστή
μικροφωνισμών, RS 232 για έλεγχο και ρύθμιση μέσω PC, ethernet in & out. Δέχεται τα wall panel
dbx ZC. Ιδανικό για: ξενοδοχεία, εμπορικά κέντρα, καταστήματα, bar restaurants, cafe κτλ. δυνατότητα
να συνδεθεί και με άλλες ίδιες μονάδες και να επεκταθεί.

The LD DPA260 is a 6-Channel 19" Speaker Processor for our VA-4, VA-8 and UNO-Array with plenty of useful setups for each system

  • Type: DSP Controller for Line Array VA-4, VA-8 and UNO
  • Model Name: DPA-260
  • Description: 6-Channel 19" speaker processor, 32bit DSP, 24bit AD/DA (48 kHz) converter
  • Inputs: 2 Channels Analog/Digital, L + R, Noise Gate, the inputs and outputs are freely assignable, that means you can assign any input to any output and vice versa
  • Input EQ: 5 Band PEQ, Low Shelf and High Shelf Types available
  • Crossover Range: 20 Hz - 20 kHz
  • Outputs: 6 Channels, High/Low Pass Filter, Filtertype and dB available, 7 Band PEQ, Low Shelf and High Shelf Types available, Limiter with Threshold, Attack and Release Parameters
  • Delay: Time or Meter available, Max. Delay up to 848 ms
  • Phase Invert Function: USB Port, Full programmable Software included with 24 Memory Capacity for Presets
  • Display: 2 × 16 character LCD with backlight
  • Switch mode power supply: 90 V - 250 V
  • Dimensions:    19" / 1U

Ψηφιακός επεξεργαστής ηχείων 2 εισόδων, 6 εξόδων με δυνατότητα ρυθμίσεων για, crossover, delay, PEQ, compressor, limiter, gain, polarity. Διαθέτει ψηφιακή είσοδο AES/EBU και υποδοχή RJ-45 ethernet για σύνδεση με H/Y. Υποστηρίζει το λογισμικό DME Designer της ΥΑΜΑΗΑ.

 

Sampling FrequencyInternal Clock96kHz
External ClockNormal Rate44.1, 48kHz (±0.1%)
Double Rate88.2, 96kHz (±0.1%)
Signal Delay761µsec Input to Output, fs = 96kHz
Frequency Response20Hz -40kHz (TYP 0dB, MAX +0.5dB, MIN -1.0dB), fs=96kHz, RL=600ohms
Total Harmonic Distortion0.007% (+22dBu@1 kHz),
0.05% (+4dBµ@20 Hz - 40kHz)
fs=96kHz, RL=600ohms;
measured with 18dB/octave filter @80kHz
Hum & NoiseTYP -82dBu,
fs=96kHz, RL=600ohms, Rs=150 ohms;
measured with 6dB/octave filter @12.7kHz;
equivalent to a 20kHz filter with ∞ dB/octave attenuation.
Dynamic Range106dB AD+DA
fs=96kHz, RL=600ohms;
measured with 6dB/octave filter @12.7kHz;
equivalent to a 20kHz filter with ∞dB/octave attenuation.
Crosstalk @1kHz-80dB INPUT to Output
fs=96kHz, measured with 18dB/octave filter @80kHz
Power Consumption 30W
Dimensions (W x H x D)480 x 44x 360.2mm
Net Weight4.2kg
Weight2.50 kg2.00 kg3.00 kg4.00 kg1.20 kg4.20 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 2.50 kg
Βάρος 2.00 kg
Βάρος 3.00 kg
Βάρος 4.00 kg
Βάρος 1.20 kg
Βάρος 4.20 kg