Content |
• Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | User's manual [14,45 MB]
LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8
The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications.
The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions.
TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
- Type: live, installation
- Channels: 8
- Mono input channels, line: 6
- Stereo line input connectors: 4x XLR, 2x 6.3 mm jack
- Mono line input type: electronically balanced
- Stereo input channels, line: 1
- Stereo line input connectors: 2 x XLR
- Stereo line input type: electronically balanced
- Input impedance: 50000 ohms (balanced), 25000 ohms (unbalanced)
- Maximum input level: + 21 dBu
- Nominal working level: -10 dBV to +4 dBu
- Mono output channels: 6
- Mono output connectors: 4x XLR, 2x 6.3 mm jack
- Mono output type: electronically balanced
- Stereo output channels: 1
- Stereo output connectors: 2x XLR
- Stereo output type: electronically balanced
- Output impedance: 60 ohms (balanced), 30 ohms (unbalanced)
- Maximum output level: + 22 dBu
- Frequency response: 5 Hz - 40000 Hz
- THD: 0,0008 %
- S/N ratio: 85 dB
- Controls: Main Input Level, Main Output Level, Main Link, Level Channel 1-6, Bal/Pan Channel 1-6, Splitter/Mixer Channel 1-6, Power
- Indicators: Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), In/Out Level Channel 1-6 (6 -segment), Power
- Operating voltage: 220 - 240 V AC, 50 - 60 Hz
- Power socket: IEC power socket
- Power consumption: 15 W
- Fuse: T 315 mAL, AC 250V
- Dimensions (W x H x D): 483 x 44.5 x 216 mm
- Accessories included in package: power cord
| Χαρακτηρισικά6 balanced mono inputs, 6 balanced mono outputs2 main balanced Inputs, 2 main balanced outputs6 input Level controls with 6 Mix / Pan controlsMaster Input and Output Level controls10 dBV to +4 dBu shifter+4 dBu to –10 dBV shifter
Rane Commercial SM26S Six-Channel Rackmountable Splitter/Mixer
Rane Commercial SM 26S Overview
The Rane SM26S is a unique, dual purpose mixer capable of mixing audio signals and distributing audio via any of the 6 outputs. There are 6 balanced mono inputs and outputs complete with gain and pan control. Pan controls place the channel's signal into the stereo field. As a splitter, the Pan controls assign which output channels distribute incoming signal. There is a separate Left and Right stereo input for incoming signals when using the SM26S as a splitter mixer. Also featured are stereo (Left/Right)"Expand" Output for cascading multiple SM26S. There is no maximum limit as to how many SM26S can be linked.
The Rane SM26S is capable of mixing and distributing signals out of 6 mono outputs. There are 6 mono inputs and 6 mono outputs, 2 sets of stereo (L/R) outputs and a set of stereo (L/R) inputs. Both a mixer and audio distributer, the Rane SM26S is flexible and versatile enough for any sound reinforcement application.
The SM26S features balanced 1/4" TRS phone inputs and outputs for maximum gain and lower noise floor.
PAN pots are featured on channels 1-6 and control stereo placement of audio when the SM26S mono inputs are in use. As a splitter, the PAN control may be used to assign which outputs distribute the incoming stereo signal.
The external power supply is effective in reducing noise created by "dirty" AC power and bad grounds.
Total # Of Inputs |
8 - Active Balanced 1/4 TRS" Phone Inputs:
Mono channels 1-6
Stereo Input (Left/Right) |
Output |
8 - Active Balanced TRS 1/4" TRS Phone Outputs:
Mono channels 1-6
Mix Output (Left/Right)
Expand Out:
Stereo Output (Left/Right) |
Monitor/Headphone Out |
No |
Impedance |
Inputs: 20 kOhms
Outputs: 200 Ohms |
Gain |
Overall Gain Range - Off to +12 any input to any output |
THD & Noise |
0.006 limit = .002% +4dBu, 20-20kHz unity gain |
Frequency Response |
10Hz - 56kHz +0/-3 dB |
Metering |
No |
Controls |
Rotary Pots:
Channel Gain (ch 1-6)
Mix/Pan (ch 1-6)
Master Output
Master Input
Power Switch |
Phantom Power |
No |
Power |
18-24VAC w/center tap 300mA Max Current |
Dimensions |
1.75 x 19 x 5.3" (4.4 x 48.3 x 13.5cm) |
Weight |
9lbs (4.1kg) |
|
XB Series - Intelligent Power
Power Without Compromises. The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection - the XV is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation. Needless to say that the Bittner High-End toroidal output transformers in the XV series are some of the best available.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX High-End Toroidal Output 100V Transformers Ground Fault Detection LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XV 400: 2x 200 W / 100 V Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.07% Signal-to-Noise Ratio: < 101 dB Channel Seperation: > 70 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Cooling: 2 to 3 fans (temp. reg. variable speed) Weight: 17 kg Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
Συσκευή διαχείρισης σημάτων audio/video. Διαθέτει 8 εισόδους/εξόδους audio και 8 εισόδους/εξόδους video. Δυνατότητα επιλογής μεταξύ των πηγών εισόδου/εξόδου audio/video. Λειτουργεί με τάση από 100V-230V, 50/60Ηz. Κατάλληλο για TV post production studio, κλειστά κυκλώματα παρακολούθησης χωρών κ.τ.λ.
VIDEO
|
Video Input
|
VS or VBS 1.0Vp-p 75Ω, 8CH, BNC
|
Video Output
|
VS or VBS 1.0Vp-p 75Ω, 8CH, BNC
|
Frequency Response
|
Below ±0.5dB(7MHz)
|
S/N
|
-60dB
|
Crosstalk
|
-60dB
|
Audio
|
Audio Input
|
2.2Vp-p, High Impedance Unbal/RCA
|
Audio Output
|
2.2Vp-p, High Impedance Unbal/RCA
|
T.H.D
|
Below 0.1(20Hz-20kHz)
|
Frequency Response
|
Below -3dB
|
S/N
|
90dB
|
Crosstalk
|
-90dB
|
CONTORL CPU MICOM
|
Interface
|
RS-232C
|
Operating Temperature
|
-10℃~+40℃
|
Storage Temperature
|
-20℃~+60℃
|
Operating Humidity
|
Below 90% RH
|
Power Source
|
100-120VAC or 220-240VACl 50/60Hz
|
(supplied AC mains transformer depends on country requirements)
|
Weight
|
5kg/11lb
|
Dimensions
|
482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in
|
|
XB Series - Intelligent Power
Power Without Compromises. The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection - the XV is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation. Needless to say that the Bittner High-End toroidal output transformers in the XV series are some of the best available.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX High-End Toroidal Output 100V Transformers Ground Fault Detection LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XV 200: 2x 100 W / 100 V Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.07% Signal-to-Noise Ratio: < 101 dB Channel Seperation: > 70 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Cooling: 2 to 3 fans (temp. reg. variable speed) Weight: 15 kg Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.