Content |
• Compact & Powerful
• Natural sound quality
• Adjustable subwoofer level
• Phase invert switch
The bigger brother of the Clubmate I with a 15– subwoofer and two 8 / 1– satellites. The satellites are equipped with neodymium high drivers and a special wave guide for frequencies up to 20Khz. Due to the 8" mid speakers this set has a more detailed natural sound quality. The built-in dynamics will protect the system and speaker drivers against overload and will give an excellent frequency response at any sound pressure level. The set is finished with scratch resistant paint and stylish metal grills.
The Club Mate 12 & 15 together with Soundmate III are upgraded into Clubmate I, II and III systems. Besides the improved sound quality the looks are also upgraded due to stylish metal grills. Together with the new scratch resistant finish and reduced weight (10-25%) makes these sets road-proof. The Clubmate sets are especially designed for the mobile DJ's, where a powerful bass is required as well as a smooth mid–high frequency response. The 12" and 15" subwoofers have a long linear cone excursion to ensure minimal distortion and high power levels as well as getting a higher maximum sound pressure. Special attention is given to the power ratings of the subwoofers and satellites as well as the behaviour of all the independent dynamic compressors and limiter circuits inside. The club mate sets are easy to set-up also for non-technical users.
Specifications Subwoofer:
Amplifier output low: 400W RMS at 8 Ohm
Amplifier output high: 2x 150W RMS at 8 Ohm
Freq. Response (-3 dB): 42- 125Hz
Crossover Frequency: 125 Hz, 24 dB/Oct BW
Efficiency (Half Space): 102 dB / W / m
Peak. SPL at 1 m (Theoretical): 128 dB
S/N Ratio: >100dB
Nominal Dispersion (HxV): 360° x 180°
Dimensions (WxHxD): 500 x 600 x 700 mm
Weight: 36.0 kg
Satellites:
Drivers: 8" / 1“
Freq. Response (-3 dB): 125-20.000Hz
Crossover Frequency: 2700 Hz, 12 dB/Oct
Efficiency (Full Space): 95 dB / W / m
Peak. SPL at 1 m (Theoretical): 116.8 dB
Nominal Dispersion (HxV): 90° x 60°
Dimensions (WxHxD): 265 x 425 x 255 mm
Weight: 7.0 kg
| LD Systems MIX 10 A G3
Active 2-Way Loudspeaker with Integrated 7-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 10 A G3 integrates a 7-channel mixer and Class D amplification with 2 x 400 watts peak power. The compact bass reflex loudspeaker features a 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 90° x 60° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels with 2-band EQ, 48 V phantom power plus switchable hi-Z input (CH1) and stereo line channel. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering and XLR monitor and subwoofer outputs. In addition, the LD MIX 10 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A speakON output allows powering the passive LD MIX 10 G3 to easily create a stereo setup.
The rigid enclosure is constructed with tough plywood featuring a 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. On its own or in tandem with the passive unit, the LD MIX 10 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type |
PA loudspeaker |
Type |
active |
Woofer dimensions |
10 " |
Woofer size |
254 mm |
Woofer brand |
Custom-made |
Tweeter dimensions |
1 " |
Tweeter dimensions (mm) |
25.4 mm |
Tweeter brand |
Celestion |
Dispersion (H x V) |
80 x 70 ° |
Frequency response |
65 - 20.000 Hz |
Amplifier |
Class D |
Amplifier output (RMS) |
2 x 200 W |
Amplifier output (peak) |
2 x 400 W |
Max. SPL |
124 dB |
Protection circuits |
limiter, over-current, overload, short circuit, thermal overload |
Mixer
Channels |
7 |
Mic inputs |
3 |
Mic inputs |
6.3 mm jack, XLR |
Controls for Mic Inputs |
+ 20 db switchable, DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level |
Line inputs |
2 |
Line input connectors |
2 x XLR, 3.5mm TRS |
Controls Line Inputs |
level |
Hi-Z inputs |
1 |
Hi-Z input connectors |
6.3 mm jack |
Input Impedance Hi-Z Input Connectors |
1000 kOhm |
Monitor Line Outputs |
2 |
Connector Type Monitor Line Output |
XLR |
Controls for Monitor Line Output |
Monitor Volume, Sub level |
Max Output Level Line Output Monitor |
17 dBu |
Record Outputs |
1 |
Increased power main output (at 4 ohm) |
200 W |
DSP Digital Effects Unit
DSP Number of Programs |
16 |
DSP Controls |
DFX Return, footswitch, Mute switch, presets |
DSP Display Elements |
Peak LED |
Main Section
Main section controls |
Balance, EQ Hi, EQ Low, EQ Mid, Master Volume, mono/stereo, Phantom Power, Power On/Off, switch operating voltage |
Main section indicators |
4-segment Level Meter, power LED |
Phantom power |
48 V |
Mains connector |
IEC socket |
Operating voltage |
SMPS |
Operating voltage |
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, automatic switching |
Power consumption |
500 W |
Cabinet
Cabinet construction |
Bass Reflex |
Cabinet material |
16 mm Plywood |
Cabinet surface |
texture paint |
Cabinet colour |
Black |
Width |
315 mm |
Height |
489 mm |
Depth |
307 mm |
Weight |
12,3 kg |
Other features |
Bluetooth, dual-tilt flange (0°/5°), Ergonomic handle |
|
Αυτοενισχυόμενο φορητό σύστημα ήχου μικρών διαστάσεων με συνολικό βάρος μόλις 17.6 κιλά. Το σετ διαθέτει 2 ηχεία, 2 δρόμων με μεγάφωνο 8" και driver 1“. 1 x ενισχυτή Crown class D ισχύος 300W (2 x 150W). Διαθέτει ένα mixer 6 καναλιών, 4 mono mic/line με combo xlr εισόδους και 2 stereo το ένα με jack και RCA και το δεύτερο με jack και mini jack stereo. Tα 4 mono κανάλια διαθέτουν bass/treble controls και μονάδα ψηφιακού εφέ, εκ το οποίων το 1-2 κουμπί phantom power, και 3-4 κουμπί Ηι-Ζ. Επιπλέον διαθέτει monitor out έξοδο με ρυθμιστή έντασης (volume), Headphone out με volume control και subwoofer output. Απόκριση συχνότητας 70Hz-18kHz (±3dB), μέγιστο SPL 121dB, διασπορά 100° x 60°. Διαστάσεις 575Y x 775Π x 400Β (mm). |
User´s Manual
LD Systems MAUI 28 G2 W
Compact Column A System with Mixer and Bluetooth white
- All-in-one column speaker for PA and monitor applications
- 2,000 watts peak Class-D system power offer high performance with a low weight
- Powerful bass reproduction with 2 x 8" woofers
- Balanced mids thanks to the 16 x 3" full-range speakers
- Precise and silky highs with 2 x 1" high-frequency drivers
- Increased range and wider coverage through the array arrangement
- Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
- Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
- Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
- Two-piece column for compact transport
- Secure plug-and-play connection thanks to the wireless multi-pin mechanism
- A wide range of application options through dismountable columns
- Easy operation with presets for mono or stereo configuration
- Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 28 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 28 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed with year-long experience in the design of the column systems as a user-friendly solution for medium sized gigs and fixed installations.
The MAUI 28 G2 is equipped with two 8" woofers, sixteen 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier with an enormous 2,000 watts peak power and produce a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides a top-class performance every time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way crossover with run time correction.
The design of the MAUI 28 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer, DJ or musician in a small band, you will be thrilled with the extraordinary sound and portability of the MAUI 28 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 28 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
126 dB
Frequency response
45 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2059 mm
Weight
30,9 kg
Woofer characteristics
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
370 mm
Subwoofer height
484 mm
Subwoofer depth
480 mm
Subwoofer weight
19.7 kg
Mid/Hi System
Midrange size
16 x 3 "
Midrange size
16 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x 1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
780 / 795 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.6 / 5.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
1000 W
Amplifier output system (peak)
2000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
2 (1x System Out, 1x Sub Out)
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
| MAUI 11 G2 W Portable Column PA System with Mixer and Bluetooth white
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
General
Product type
PA Complete Systems
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Mid/Hi System
Midrange size
8 x 76.2 mm
Midrange brand
Custom-made
Midrange voice coil
25.4 mm
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
Aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection, Multiband limiter, short circuit, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch, Hi-Z Level, Line level, Main level, Mono/stereo switch, MP3/Bluetooth Level, Power, Sub level
Indicators
Limit, mono, On, Protect (protection circuit engaged), Setup, Signal, stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line input connectors
RCA, XLR/6.3 mm jack
Line outputs
1 x direct out
Line output connectors
XLR
Mic inputs
XLR/6.3 mm jack
MP3 input connectors
3.5 mm jack
Hi-Z input connectors
6.3 mm jack
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
| LD Systems STINGER G3 EVENT SET A 2 x 10" powered PA Speaker + 2 x 15" powered Subwoofer
This set is the perfect all-round package for small to medium-sized gigs and functions providing a tight and punchy low end from the two subwoofers. We recommend this set for the following type of application: DJ, small bands and more. The STINGER G3 EVENT SET A is suitable for audiences of up to 300* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 10 A G3 – 10” Powered loudspeaker
2 x STINGER SUB 15 A G3 – 15” Powered subwoofer
2 x STINGER 10 G3 PC – Padded protective cover for loudspeaker
2 x STINGER SUB 15 G3 PC – Padded protective cover for subwoofer
2 x STINGER SUB 15 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment
General
Product type |
PA system |
Type |
Powered |
System output (RMS): |
1.500 W |
Frequency response |
40 - 20,000 Hz |
Dispersion (H x V) |
90 x 50° |
Weight |
91,782 kg |
LD Systems STINGER SUB 15 G3 PC Padded protective Cover for STINGER® G3 Subwoofer 15"
Product type |
PA Complete Systems Accessories |
Material |
birch multiplex |
Type |
castor boards |
Material thickness |
15 mm |
Surface |
Polyurea |
Color |
Black |
Number of casters |
4 |
Wheel diameter |
100 mm |
Manufacturer of castors |
Adam Hall |
number of drag castors |
2 |
Length |
624 mm |
Weight |
6 kg |
LD Systems STINGER SUB 15 G3 CB Dolly Board for Stinger G3 Subwoofer 15" Models
Product type |
PA loudspeaker |
Type |
active |
Low/mid driver dimensions |
10 " |
Woofer size |
254 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Woofer voice coil |
2 " |
Woofer voice coil (mm) |
50.8 mm |
Horn |
BEM optimized CD Horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
BMS |
HF driver voice coil |
1 " |
HF driver voice coil |
25.4 mm |
Dispersion (H x V) |
90 x 50 ° |
RMS |
300 W |
Peak power |
600 W |
Frequency response |
65 - 20000 Hz |
Max. SPL (peak) |
127 dB |
Protection circuits |
thermal overload |
Input sensitivity |
-9 dBu |
Controls |
2 x Mic/Line |
Indicators |
Mic |
Line input connectors |
XLR |
Line outputs |
1 |
Operating voltage |
Switching power supply |
Cabinet material |
12 mm Plywood |
Monitor angle |
54 ° |
Width |
325 mm |
Height |
527 mm |
Depth |
318 mm |
Weight |
12,7 kg |
LD Systems STINGER 10 A G3 Active 10" 2-way bass-reflex PA Loudspeaker
Product type |
PA Loudspeakers Accessories |
Material |
Nylon 1680D |
Height |
530 mm |
Width |
350 mm |
Depth |
320 mm |
Weight |
0,5 kg |
LD Systems STINGER 10 G3 PC Padded protective cover for Stinger® G3 PA Loudspeaker 10"
Product type |
PA subwoofer |
Type |
Powered |
Low/mid driver dimensions |
15 " |
Woofer size |
381 mm |
Woofer magnet |
Ferrite |
Woofer voice coil |
3 " |
Woofer voice coil (mm) |
76.5 mm |
Amplifier |
Class D |
Input impedance |
30000 Ohm(s) |
Input sensitivity |
0.3 V |
RMS |
450 W |
Peak power |
900 W |
Frequency response |
40 - Low-Pass Hz |
Line inputs |
2 |
Line input connectors |
XLR |
Line output connectors |
XLR |
Max. SPL (peak) |
133 dB |
Protection circuits |
short circuit |
Power consumption (max.) |
600 W |
Operating Temperature |
0 - 40 °C |
Relative Humidity |
< 80% (non-condensing) |
Cabinet surface |
Polyurea |
Cabinet construction |
Bass Reflex |
Controls |
Mode |
Depth |
624 mm |
Indicators |
Signal |
Line outputs |
2 |
Operating voltage |
SMPS |
Cabinet material |
18 mm Plywood |
Height |
477 mm |
Weight |
31,9 kg |
LD Systems STINGER SUB 15 A G3 Active 15" bass-reflex PA subwoofer
Product type |
PA Subwoofer Accessories |
Color |
Black |
Material |
Nylon 1680D |
Type |
Covers |
Thickness of the padding |
8 mm |
Depth |
625 mm |
Width |
567 mm |
Height |
470 mm |
Weight |
1,191 kg |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.