Content | D3901_MANUAL_GB_V1.pdf
Odin S-18A
• CELESTION woofer inside • High Power 1.5KW Class-D Amplifier • DSP optimized Amplification ensures highest reliability • Multivoltage Power supply with active PFC
An active array element, delivering the low frequency sound waves at 1200 Watts RMS, complementing the T-8A satellites and adding to the true Odin character.
Specifications
System: Active Subwoofer, Active Array Element AMP Power: 1500 W Continuous Class D, 6000W Peak Speaker: 18" (450mm) CELESTION, Ferrite Magnet Subwoofer, 4– Voice Coil, 1200W RMS, Water Resistant Coating Frequency Response (+/-3dB): 41 Hz - 110 Hz MAX SPL @ 1m: 136dB Directivity: Omnidirectional Cooling: Passive Cooling + forced cooling inside Audio Connector: XLR In- and output Data Connector: RJ45 Date In & Link Cascading Connector External Controls: 9 Fixed Preset + 1 Editable preset, Power Switch with LED indicators for Clip / SIG / PROT DSP Processor: 32 bit , 24bit/48kHz Audio conversion AD/DA Electronic Protections: Thermal / Convection-Fan / Overload / Digital Limiter / Compressor Mains Connector: Neutrik PowerCON Connector In & Out Power Supply: 100 ~ 240VAC, 50Hz/60Hz Power Consumption: 2000W Enclosure Construction: 18mm Birch Plywood, Resistant Black Paint, 1.5T Metal Grill with Foam, Rubber Feet, Two Handles on Each Side, Water Resistant Coating Mounting: M20 Metal Polemount, 4-point Suspention Dimensions (LxWxH): 700 x 635 x 665mm Net Weight: 58.5 Kg / 128.7 Ibs
Optional Accessories: Flybar Polemount Adaptor Ground stacking feet Flying Pin DSP Network Interface
|
Αυτοενισχυόμενο ηχείο 18" Sub Woofer. Διαθέτει ενισχυτή D Class 1000W (peak) της Crown με τεχνολογία DriveCore, ενσωματωμένο DSP, V5 tuning συμβατό με συστήματα Vertec και VTX, HiQnet Network για απομακρυσμένο έλεγχο μέσω IOS και Android συσκευές. Στιβαρή κατασκευή, διαθέτει χερούλια μεταφοράς, σημεία στήριξης Μ10, υποδοχή Μ20 pole mount. Το ενσωματωμένο DSP περιέχει 20 PEQʼs, delay ως και 2 sec, γεννήτρια ήχου, input mixing, amplifier monitoring και 50 user preset. Επιπλέον διαθέτει oθόνη LCD για γρήγορο και εύκολο configuration και setup. Max SPL 135dB, απόκριση συχνότητας 35Hz- 120Hz (-3 dB). Διαστάσεις 575 x 684 x 683 (Υ x Π x Β), βάρος 39.5 kg, χρώμα μαύρο. Ιδανικό για εταιρίες ενοικιάσεως ήχου, DJ sets, μόνιμες εγκαταστάσεις. |
Αυτοενισχυόμενο ηχείο sub με έλεγχο μέσω Wi-Fi, με ενισχυτή Crown class D 1500W. 18" woofer, απόκριση συχνότητας 35Hz - 87Hz (± 3dB), με max SPL 134dB peak. Δύο εισόδους balanced xlr (combo) με ρυθμιστικό gain εισόδου και DSP limiter κύκλωμα προστασίας. Δύο εξόδους thru, κομβίο polarity switch και hi pass φίλτρο. Ξύλινη καμπίνα απο κόντρα-πλακέ θαλάσσης πάχους 18mm, με επένδυση ειδικής βαφής DuraFlex για μεγαλύτερη αντοχή. Ιδανικά για D.j. sets, μικρά p.a. και μόνιμες εγκαταστάσεις. Διαστάσεις 692mm x 523mm x 724mm (H x W x D). Βάρους 36,8Kg.
18” Self-Powered Extended Low-Frequency Subwoofer System with Wi-Fi
The JBL PRX818XLF is a self-powered extended low-frequency subwoofer system. Featuring a JBL 18-inch woofer powered by a 1500-watt class-D amplifier, PRX818XLF delivers incredible output in a lightweight and compact form factor.
The PRX800 series integrates embedded ioSYS technology which enables easier setup and control when used with the HARMAN Connected PA app and compatible products. Connected PA delivers seamless plug-and-play operation with a variety of HARMAN equipment and enables you to control your entire live sound system with one app. Products within the Connected PA system self-identify and retain presets for effortless setup, and setup wizards help you quickly optimize speaker levels, configuration settings and EQ. Current products with embedded ioSYS technology and HARMAN Connected PA compatibility include the Ui24R mixer, JBL PRX800 loudspeakers, dbx Di1 direct boxes, and AKG P5i microphones. Learn more about HARMAN Connected PA.
FEATURES
- Built-in Wi-Fi for wireless control of your system from anywhere in the venue
- Free PRX Connect mobile app for iOS and Android provides wireless control over volume levels, 8-band parametric EQ and up to 50ms of speaker delay to fine-tune your sound
- Class-leading 1500-watt amplifier delivers ample power to fill your venue
- JBL Differential Drive® transducers for higher SPL in a lightweight design
- Next-generation JBL neodymium compression drivers
- Redesigned Crown input technology, including XLR, 1/4” and RCA inputs plus XLR loop-through
- Intelligent variable-speed fan activates only when needed to reduce noise
- Updated tuning delivers flat frequency response and smooth off-axis behavior
- Durable wooden cabinets, tour-proven DuraFlex™ finish and dent-resistant 16-gauge grilles
- Universal power supply for worldwide compatibility
- dbx Type IV™ limiting ensures clear, accurate sound at high volumes
- Brutal testing regimen—including the famous JBL 100-hour power test—ensures reliable performance
APPLICATIONS
^
- The PRX815XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/ sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX815XLF performs with exceptional efficiency and control. The subs are stackable and light-weight, ensuring quick set-ups and tear-downs. Due to their rugged construction, they are perfect for AV rental inventories. With the integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization. PRX800 subwoofers feature a standard M20 threaded pole cup that can accept most modern subwoofer-mounted speaker poles.
- The PRX818XLF is a high performance self-powered subwoofer system with remote Wi-Fi control of onboard DSP EQ parameters. The PRX818XLF is comprised of a powerful 2278G Differential Drive® dual voice-coil and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.
- All PRX800 cabinets are built from 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX800 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each
- The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.
SPECIFICATIONS
^
|
System Type |
Self Powered 18” subwoofer |
|
Maximum SPL Output |
134 dB peak |
|
Frequency Range (-10 dB) |
30 Hz - 103 Hz |
|
Frequency Response (±3 dB) |
35 Hz – 87 Hz |
|
Input Connectors |
Two Balanced female XLR/ 1/4” combo connectors |
|
Input Impedance |
20K Ohms (balanced) |
|
Signal Indicators |
Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power: Blue indicates system has power and ready |
|
Dynamic Control (Input) |
dbx Type IV™ limiter circuit |
|
System Low Pass |
80 Hz |
|
Loop out Crossover Frequency |
80Hz Digital 24db/octave Linkwitz-Riley Filter |
|
Design |
Highly efficient Class-D amplifier |
|
Power Rating |
1500W |
|
AC Power Input |
100V - 240V ~ 50/60 Hz |
|
LF Driver |
1 x JBL 2278G 460 mm (18 in) woofer |
|
Enclosure |
Rectangular, 18 mm, birch-poplar mix |
|
Transport |
2 x injection molded handles with backing cup |
|
Finish |
Obsidian DuraFlex™ finish |
|
Grille |
Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. |
|
Dimensions (H x W x D) |
692 mm x 523 mm x 724 mm (27.26 in x 20.6 in x 28.5 in) |
|
Net Weight |
36.28 kg (80.0 lb) |
|
Gross Weight |
45.0 kg (100.0 lb) |
|
Aυτοενισχυόμενο ηχείο Sub για επιδαπέδια η αιωρούμενη χρήση Line Array. Aπόκριση συχνότητας: 34-220Ηz, με 1x18ʼʼ 2268FF διπλού πηνίου woofer νεοδυμίου LF. Moνάδα ενισχυτών DPC-2 σχεδιασμός από Crown USA, με 1500W Peak, 750w Continius (Dual Bridge Technology Class D) 126dB Spl/1m. XLR input+Loop thru XLR out. Επιλογή cross 80 ή 120Hz, επεξεργασία DSP για προστασια, x/over-eq-limiter. Neutrik Powercon conectors NAC3MPA/MPB (in+loopthru). Διαθέτει ξύλινη καμπίνα από 18mm πολύφυλλη σημύδα, Μ10 υποδοχές eyebolt για μόνιμη κρέμαση, υποδοχή για βραχίονα δορυφόρου και ανθεκτική επένδυση Duraflex. Με ενσωματωμένο σύστημα αιώρησης μπορούν να ενωθούν εώς και 6 ηχείια σε συστοιχία, σε συνεργασία με το Array Frame VRX-AF (option). Διαστάσεις ΥΠΒ 508x597x749mm. Βάρος 38.5kgr |
User's manualLD Systems STINGER SUB 18 A G3
Active 18" bass-reflex PA subwoofer
STINGER SUB 18 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 18 A G3 is powered by high efficiency Class D amplification with a giant 800 watts RMS output. It drives a custom designed 18” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 18 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 18 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
- Active 18” bass reflex PA subwoofer
- High-efficiency 800 watts RMS digital power stage and 135 dB max. SPL
- 18” custom design woofer for extended low end down to 35 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
18 "
Woofer Size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
RMS
800 W
Peak power
1600 W
Frequency response
35 - 200 Hz
Max. SPL (peak)
135 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
677 mm
Height
547 mm
Depth
740 mm
Weight
42,6 kg
|
Features
- Powered subwoofer system
– High output 18″ loudspeaker
– Polarity switch (0º-180º)
– Filtered ouput defeat switch
– Variable 60 -160 Hz high-pass filter
– Gain control
The Avant 18A is a powered subwoofer system designed to provide extended bass response for the Avant full-range cabinets.
A 750 W Class D amplifier drives a D.A.S. 18H bass loudspeaker. The 18H loudspeaker incoporates a 4″ voice coil for high power handling and output.
The subwoofer system includes two balanced inputs with stereo filtered output connections for satellite systems. The variable crossover ranges from 60 Hz-160 Hz and can be defeated to offer stereo "loop thru” connections. A gain control and polarity reverse feature increase user control over the system.
Technical Data Nominal LF Amplifier Power | 750 W | Frequency Range (-10 dB) | 35 Hz-160 Hz | Rated Peak SPL at 1 m | 133 dB | Internal Crossover | Electronic Variable 60 Hz-160 Hz | Enclosure Material | Plywood | Color/Finish | Black/Paint | Connectors | Input: 2 x Female XLR
Loop Thru: 2 x XLR
AC Input: Male IEC | AC Requirements | 115 V, 50/60 Hz
230 V 50/60 Hz | Current Draw (1/3 power @ 230 V) | 1.5 A | Dimensions (H x W x D) | 63 x 54 x 65 cm
24.8 x 21.3 x 25.6 in | Weight | 39 kg (85.8 lb) |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.