DAP AUDIO D4531 Qi-4400 4 ΚΑΝΑΛΙΑ ΕΝΙΣΧΥΤΗΣ 4ch x400W

563.88 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Παράδοση σε 4-10 ημέρες Παράδοση σε 4-10 ημέρες Κωδικός προϊόντος: D4531 Κατηγορία:
The Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for […]

 

Διαβάστε περισσότερα

The Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for each stereo pair. With the SMPS and Class-D amplification it is a light weight solution with a high efficiency power consumption / power output ratio. An advanced protection circuit will protect the amplifier and it’s connected speakers. It has a short circuit/ thermal, DC ,RF protection and a soft start system. The Qi-amplifiers are made with high-quality low deviation components to ensure a perfect sound quality and a long life time.

Specifications

Output power
Stereo 4Ohm: 4x 400W
Stereo 8Ohm: 4x 250W
Bridge 8Ohm: 2x 800W
Parameters
S/N Ratio: >90dB
Input sensitivity: 0,7V
Input impedance: 20kOhm Bal./10Kohm unbal.
Technology: Class-D
Protection: short circuit, DC, RF, Soft start
Cooling: Temp controlled fan
Power supply: SMPS

Connections
Input: 4x XLR
Output: 4x Speaker connector
Power: IEC

Physical
Dimensions: 388 x 435 x 44 (WxHxD)
Installation depth: 370 (excl. conn.)
Weight: 5.8Kg

Electrical
Input Voltage: 100~240VAC…50/60Hz
Power consumption: 875W
 

 

Βάρος 6.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Δώστε πρώτος μία αξιολόγηση “DAP AUDIO D4531 Qi-4400 4 ΚΑΝΑΛΙΑ ΕΝΙΣΧΥΤΗΣ 4ch x400W”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

SettingsDAP AUDIO D4531 Qi-4400 4 ΚΑΝΑΛΙΑ ΕΝΙΣΧΥΤΗΣ 4ch x400W removeINTER-M A-500 Ψηφιακό modular ενισχυτή 8 καναλιών removeCROWN CT-475 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 4Χ75W removeLAB GRUPPEN FP 10000Q ΕΝΙΣΧΥΤΗΣ 4Χ2100 Watt/4Ohm removeLD Systems DEEP2 4950 Power Amplifier 4 x 810W 4 Ohm removeCROWN CT-8150 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 8x150W/8Ω remove
Imageinter-m a-500 modular power amplifier 30w
SKUD4531A-500CT-475E008135LDDP4950CT-8150
Rating
Price 563.88 με ΦΠΑ 24% 786.99 με ΦΠΑ 24% 1,160.42 με ΦΠΑ 24% 5,200.00 με ΦΠΑ 24% 803.51 με ΦΠΑ 24% 2,636.01 με ΦΠΑ 24%
Stock

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

AvailabilityΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The Qi-amplifier range is developed for installation use to create a perfect match with the Xi installation speaker range. Due to the rugged steel housing it can also be applied for mobile use. With only 1U it gives power for 4 channels. All 4 channels are individual controllable and bridge mode can be set for each stereo pair. With the SMPS and Class-D amplification it is a light weight solution with a high efficiency power consumption / power output ratio. An advanced protection circuit will protect the amplifier and it's connected speakers. It has a short circuit/ thermal, DC ,RF protection and a soft start system. The Qi-amplifiers are made with high-quality low deviation components to ensure a perfect sound quality and a long life time.

Specifications Output power
Stereo 4Ohm: 4x 400W
Stereo 8Ohm: 4x 250W
Bridge 8Ohm: 2x 800W
Parameters
S/N Ratio: >90dB
Input sensitivity: 0,7V
Input impedance: 20kOhm Bal./10Kohm unbal.
Technology: Class-D
Protection: short circuit, DC, RF, Soft start
Cooling: Temp controlled fan
Power supply: SMPS

Connections
Input: 4x XLR
Output: 4x Speaker connector
Power: IEC

Physical
Dimensions: 388 x 435 x 44 (WxHxD)
Installation depth: 370 (excl. conn.)
Weight: 5.8Kg

Electrical
Input Voltage: 100~240VAC...50/60Hz
Power consumption: 875W  
 
Ψηφιακό modular ενισχυτή 8 καναλιών (7+1), ισχύ σε κάθε κανάλι 30W (333 ohm). Αυτόματος έλεγχος τις κατάστασης των ενισχυτών, και αυτόματη ενεργοποιήσει του spare ενισχυτή σε περίπτωση δυσλειτουργίας. Δυνατότητα monitoring κάθε καναλιού μέσο ακουστικών. Τροφοδοσία 220-240 AC, και σε περίπτωση διακοπής του δικτύου τροφοδοτείται με 24V DC μέσο μπαταρίας.

Τελικός ενισχυτής 4x75W/8Ω. Ευαισθησία 1.4V -
Απόκριση συχνότητας (at 1W into 4/8 ohms) ±
0.5Db-Crosstalk (below rated power 20Hz to
1kHz) > 70dB S/N110dB-THD 55dB, typically
> 70dB. Διαστασεις: 1.75" x 19" x 14.25“.
Κατάλληλος για μόνιμες εγκαταστάσεις, 1U rack.
Βάρος 4,5kg.

 

POWER AMPLIFIER 4 X 2100 WATT / 4Ω

Παραµόρφωση: THD 20Ηz - 20ΚΗz στο 1W 112d ΒΑ
Class TD µε Ρυθµιζόµενο Switch Mode R.SMPS
VPL Voltage Peak Output Ρύθµιση Bridge-mode,
∆υνατότητα λειτουργίας µε τάση 130 - 260Volt,
Προστασία: AFS, VHF, Θερµική, DC, RFI, Υπέρτασης, Βραχυκυκλώµατος,
Ανοιχτού Φορτίου
2xRJ45 EtherCon Σύνδεση για έλεγχο µε υπολογιστή µε το σύστηµα
NomadLink Network ή µε το NLB 60Ε
Ισχύς Εξόδου: 4x1300W RMS /8Ω - 4x2100W RMS /4Ω -
4x2500W RMS /2Ω
2x4200W RMS /8Ω - 2x5000W RMS /4Ω
∆ιαστάσεις / Βάρος: 483x88x396mm / 12kg

Very high power  and  channel density  –   •   The  four-channel  FP
10000Q delivers a  total of 10000 W  (4 x 2500 W @ 2 ohms)  in
only 2U
Four-channel fexibility –   •  Four channels in one cabinet increases
effciency, fexibility and value  in powering monitor systems,  line
arrays, and bi- or tri-amped systems. Adjacent channels bridgeable
for 2- or 3-channel operation
Lab.gruppen  sound  quality  –   •   FP  10000Q  amplifers maintain
the impeccable sonic performance standards set by the original fP
Series, with the same durability and even greater effciency
NomadLink   • ®  network  ready  – Monitoring  and  control  of  key
functions accessible via the  intuitive DeviceControl software and
the robust, daisy-chained NomadLink® network
Patented  Class  TD  amplifer  topology  –    • Road-proven  output
stage delivers Class B audio quality with Class D effciency 

Regulated  Switch Mode  Power  Supply  (R.SMPS)  –    • Output
power remains constant even with signifcant drops in the mains
voltage
Effcient cooling system –   •  Unique, lightweight Intercooler® cop-
per cooling system dissipates more heat to allow extended peak
output
Adjustable parameters –   •  Selectable Gain, scalable Voltage Peak
Limiter (VPL), and bridge-mode operation allow custom confgura-
tion for any system or application
XLR input connectors   •
Heavy-duty binding post or Speakon output connectors   •
Comprehensive  protection  and warning  –   •   Excessive  output
current, DC, high  temperature, very high  frequency  (VHF), short
circuit, open load, mains fuse protection, and soft start

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 4 Ohms)
4 x 810 W

Rated ouput power (1kHz @ 8 Ohms)
4 x 490 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1600 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

Total Harmonic Distortion (THD)
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>70 dB

Gain
38 dB

Input sensitivity
0.775 V

Protection circuits
DC protection , short circuit , thermal overload

Controls
4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
4

Speaker output connections
Speakon compatible

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
19,6 kg
 

Τελικός ενισχυτής 4x75W/8Ω. Ευαισθησία 1.4V -
Απόκριση συχνότητας (at 1W into 4/8 ohms) ±
0.5Db-Crosstalk (below rated power 20Hz to
1kHz) > 70dB S/N110dB-THD 55dB, typically
> 70dB. Διαστασεις: 1.75" x 19" x 14.25“.
Κατάλληλος για μόνιμες εγκαταστάσεις, 1U rack.
Βάρος 4,5kg.

Weight6.003.004.5014.0019.604.50
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 6.00 kg
Βάρος 3.00 kg
Βάρος 4.50 kg
Βάρος 14.00 kg
Αντίσταση ΩΜ

4

Βάρος 19.60 kg
Βάρος 4.50 kg