DAP AUDIO D6162 PA-16120 Ενισχυτής Public Adress 120W

	DAP AUDIO D6162 PA-16120 Ενισχυτής Public Adress 120W remove	YAMAHA XM-4180 Τελικός Ενισχυτής 4x180W remove	RAM AUDIO S-3004 Ενισχυτής Ισχύος 4x700 Watts remove	YAMAHA XM-4080 Τελικός Ενισχυτής 4x80W remove	RAM AUDIO T-604 Ενισχυτής Ισχύος 4x160 Watts remove	LAB GRUPPEN C 16-4 Ενισχυτής Ισχύος 4x400 Watts remove
Name	DAP AUDIO D6162 PA-16120 Ενισχυτής Public Adress 120W remove	YAMAHA XM-4180 Τελικός Ενισχυτής 4x180W remove	RAM AUDIO S-3004 Ενισχυτής Ισχύος 4x700 Watts remove	YAMAHA XM-4080 Τελικός Ενισχυτής 4x80W remove	RAM AUDIO T-604 Ενισχυτής Ισχύος 4x160 Watts remove	LAB GRUPPEN C 16-4 Ενισχυτής Ισχύος 4x400 Watts remove
Image
SKU	D6162	H060.00038	S-3004	H060.00045	T-604	C16-4
Rating
Price	€1,449.19 €1,347.74 με ΦΠΑ 24%	€1,850.00 €1,725.00 με ΦΠΑ 24%	€2,008.79 €1,599.59 με ΦΠΑ 24%	€993.00 €957.73 με ΦΠΑ 24%	€1,016.79 €941.89 με ΦΠΑ 24%	€3,334.36 €3,162.00 με ΦΠΑ 24%
Stock	Εξαντλημένο	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 5 απομένουν σε απόθεμα	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας
Availability	Εξαντλημένο	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 5 απομένουν σε απόθεμα	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας
Add to cart	Διαβάστε περισσότερα	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι
Description
Content	D6162_MANUAL_GB_V1.pdf • Compact solution • 16x 120W • Can be used stereo, parallel or bridged • Ideal for fixed installations The DAP PA-16120 is 16x 120W plain amplifier. It is a reliable work horse than can be used for many applications. The DAP PA-16120 can be used as 16 channel mono amplifier or 8 channel stereo amplifier. All inputs can be connected by terminals and the volume can be set on the backside of the amplifier and has a HPF filter. Furthermore each amplifier can be set as 2 channel, parallel or bridged. Specifications Rated Power (1kHz, THD 1%): 120W x 16 / 240W x 8 Output impedance: 80W (4 Ohm) / 120W (8 Ohm) or 70V (21 Ohm) Input sensitivity: 0dB / 20K Ohm Balanced Frequency response: 80Hz – 15kHz T.H.D: 0,1% Signal to noise ratio: 90dB Power: 100~240VAC, 50/60Hz Weight: 8,8Kg Dimensions: 483 x 88 x 380mm	Τετρακάναλος τελικός ενισχυτής ζωνών, ισχύος 4 x 180 Watt / 8Ω RMS, 4 x 230 Watt /4Ω RMS, 2 x 460 Watt / 8Ω bridge RMS, ξεχωριστή ρύθμιση έντασης ανά κανάλι, HPF σε κάθε κανάλι, εισόδους XLR και Euro block, με δυνατότητα κοινής εισόδου κατόπιν επιλογής. Διαστάσεις (Π x Υ x Β): 480 x 88 x 412 mm, Βάρος: 10 kg	The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon)

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz
Phase Response (@1W 20Hz-20kHz): ±15deg
Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB
Voltage Gain (selectable): 26/32/38 dB
Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V
3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V
Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB
3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB
Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A
3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A
Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches
Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs

Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

Τετρακάναλος τελικός ενισχυτής ζωνών, ισχύος 4 x 80 Watt / 8Ω RMS, 4 x 115 Watt /4Ω RMS,
2 x 230 Watt / 8Ω bridge RMS, ξεχωριστή ρύθμιση έντασης ανά κανάλι, HPF σε κάθε κανάλι,
εισόδους XLR και Euro block, με δυνατότητα κοινής εισόδου κατόπιν επιλογής.

Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 8Ω 80W x 4
Power Output Level 20Hz - 20kHz 1kHz THD+N=0.2%, 4Ω 115W x 4
Sensitivity, RL=8. Att.max +4dB
S/N Ratio, 20Hz-20kHz (DIN AUDIO) 100dB
Idle Power Consumption 40W
1/8 Power Consumption (4Ω) 500W
Power Bandwidth, (Half power THD+N=0.5%) 10Hz – 40kHz
Intermodulation Distortion, 60Hz: 7kHz, 4:1, half power 0.1%
Frequency Response, f=20Hz-20kHz -0.5dB, 0dB, 0dB
Residual Noise, 20Hz-20kHz(DIN AUDIO) -70dB
Voltage Gain, 8Ω, f=1kHz 100
Sensitivity, ATT. max 26dB
Maximum Input Voltage 22dB
Input Impedance 30kΩ (balance) 15kΩ (unbalance)
Controls, Front panel POWER switch (push on/push off), attenuator (31position) x 4
Controls, Rear panel MODE switch (STEREO/BRIDGE/PARALLEL) x 2 HPF switch (OFF/20Hz/55Hz 12dB/oct) x 2
Connectors, Output 5–way binding post/ch
Connectors, DATA PORT D-sub15P, Monitor:Output Level/ch,Active/ch, Model Detect Control:Mute/ch
Connectors, Power AC inlet x 1
Indicators, POWER x 1 (Green)
Indicators, SIGNAL x 4(Green)
Indicators, CLIP/LIMIT x 4 (Red)
Indicators, PROTECT/MUTE x 4 (Red)
Load Protection POWER switch on/off mute, DC-fault output relay off
Power Requirements UC: 120V / 60Hz,
Weight 10kg (22 lbs.)
Dimensions (W x H x D) 480 x 88 x 412.2 mm (18-7/8" x 3-7/16" x 16-1/4“)

• Eight and four channel models with 300W and 150W per channel
• Minimal footprint and mass arround 200mm depth and 6 Kg
• Optional Add-on card to interface with third party alarm systems with GPIO connections
• FCM™ Faulty Channel Management system to avoid entire device shutdown
• State-of-the-art layout for maximum performance and reliability
• Highly oversized thermal dissipation design for maximum reliability
• Superb distortion and noise figures
• All channels bridgeable by pairs
• Selectable gain in four channel groups (26, 32 and 38dB)
• Subsonic filter per channel (35Hz user selectable)
• Temperature and signal dependant, intelligent cooling system for minimal noise
• Optimal heat extraction due to the air tunneled enclosure and insulator-less power devices attachment to the heatsink
• Direct connector-less output for maximum quality loudspeaker control
• High grade engineering inside with the latest SMD technology
• Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection
• Critical electronic and mechanical parts selection
• Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection
• Detented and optionally tamper-proof volume potentiometers
• Hi efficiency, two steps Class H Audio topology
• Protection, Signal and Clip indicators per channel
• Power On and Standby general indicators
• Extremely compact, fully featured QuantaPulse Power supply
• Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations
• Factory preset worldwide mains voltage power supply
• Laser cut four milimeters aluminium front panel
• Rugged 2U steel chasis

OUTPUT POWER T-604 T-1204 T-1208 T-2408 RMS, 1kHz, 1.0% THD+N 4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W 8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W Pink Noise 12dB CF 4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 WFrequency Response (power bandwidth ±0.25dB): 20Hz-20kHz

Phase Response (@1W 20Hz-20kHz): ±15deg

Total Harmonic Distortion (20Hz-20kHz):
Intermodulation Distortion (SMPTE):
Crosstalk (20Hz-20kHz): >70dB

Voltage Gain (selectable): 26/32/38 dB

Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V

Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB

Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A

Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches

Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs

Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

Ισχύς Εξόδου: 4x 400W RMS /8Ω - 4x 300W RMS /4Ω - 2x 600W RMS /8Ω

4x 400W RMS 70/100V - 2x 800W RMS 140/200V

Παραμόρφωση: THD 20Hz-20.000Hz στο 1W 0,1%

Απόκριση Συχνότητας: 6,8Hz - 34Hz

Λόγος Σήματος / Θόρυβο: 112dBA

Class TD-F: ρυθμιζόμενο Switch Mode, PSU

Hi-Z: 70V/100V έξοδος ανά κανάλι

Δυνατότητα Bridge-Mode

Δυνατότητα Λειτουργίας με τάση 130 - 265V

Προστασία AFS, VHF, Θερμική, DC, RFI, Υπέρτασης, Βραχυκυκλώματος

2xRJ45 EtherCon σύνδεση για Έλεγχο του ενισχυτή με το σύστημα NomadLink Network με τη βοήθεια Υπολογιστή ή με το NLB 60E

Διαστάσεις / Βάρος: 483x88x343 mm / 12kg