DBX 1046 COMPRESSOR/LIMITER 4 ΕΙΣΟΔΩΝ

443.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Κατόπιν Παραγγελίας Κατόπιν Παραγγελίας Κωδικός προϊόντος: DBX 1046 Κατηγορία:
DBX-1046 Compressor – limiter 4 εισόδων, κύκλωμα “overeasy“, peakstoplus, είσοδοι – έξοδοι XLR και 1/4 TRS. Κατάλληλος για studio, live χρήση. Four independent channels of operation, stereo linkable in two pairs PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings Independent Threshold and ratio controls Switchable OverEasy® or Hard Knee compression Classic […]

 

Διαβάστε περισσότερα

DBX-1046
Compressor – limiter 4 εισόδων, κύκλωμα “overeasy“, peakstoplus,
είσοδοι – έξοδοι XLR και 1/4 TRS. Κατάλληλος για studio, live χρήση.

  • Four independent channels of operation, stereo linkable in two pairs
  • PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
  • Independent Threshold and ratio controls
  • Switchable OverEasy® or Hard Knee compression
  • Classic dbx® compression
  • Differentially balanced gold-plated XLR and 1/4″ inputs and outputs
  • True RMS level detection
  • Precision metering of input level, output level, and gain reduction
  • Dual True stereo or quad mono operation
  • Switchable +4dBu or -10dBV operation per channel

 

Input Connectors XLR and 1/4″ TRS (Pin 2 and tip hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input > +22 dBu balanced or unbalanced
CMRR Typically >50 dB at 1 kHz
Output Connectors XLR and 1/4″ TRS (Pin 2 and tip hot)
Output Type Servo-balanced/unbalanced, RF filtered
Output Impedance Balanced 30 Ohm, unbalanced 15 Ohm
Max Output > +22 dBm balanced, > +20 dBm unbalanced
Bandwidth 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response 0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range > 118 dB, unweighted
THD+Noise >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling True RMS Power Summing
Compressor Threshold Range -40 dBu to +20 dBu
Compressor Ratio 1:1 to infinity:1
Compressor Threshold Characteristic Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic AutoDynamic™
Compressor Attack Time Program-dependent
Compressor Release Time Program-dependent
Compressor Output Gain -20 to +20 dB
Limiter Threshold Range 0 dBu to +24 dBu (off)
Limiter Ratio infinity:1
Limiter Type PeakStopPlus® two-stage limiter
Limiter Stage 1 PeakStop® brickwall limiter
Limiter Stage 1 Attack Time Zero
Limiter Stage 1 Release Time Zero
Limiter Stage 2 Predictive intelligent program limiter
Limiter Stage 2 Attack Time Program-dependent
Limiter Stage 2 Release Time Program-dependent
OverEasy® Switch Activates the OverEasy compression function
I/O Meter Switch Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch Activates the direct input-to-output hard-wire bypass
Operating Level Switch (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator 1 LED to indicate PeakStop™ limiting
Function Switches LED indicator for each front-panel switch
Output Transformer Options Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption 20 Watts
Fuse 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector IEC receptacle
Dimensions 1.75“Hx19“Wx9“D (4.4cmx48.3cmx20.1cm)
Unit Weight 5.2 lbs. (2.4 kg)
Shipping Weight 7.6 lbs. (3.5 kg)

 

Βάρος 3.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “DBX 1046 COMPRESSOR/LIMITER 4 ΕΙΣΟΔΩΝ”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

DBX 1046 COMPRESSOR/LIMITER 4 ΕΙΣΟΔΩΝ removeTOA L-1102 2 CHANNEL LIMITER/LEVELLER removeBEHRINGER DEQ2496 Ultra High-Precision Digital Mastering Processor removeARX AFTERBURNER DUAL CH./BAND ENHANCED COMPRESSOR/LIMITER removeSAMSON S-COM4 Four Channel Compressor/Gate Processor removeAVALON AD2055 DUAL MONO PURE CLASSA PARAMETRIC MUSIC EQUALIZER remove
NameDBX 1046 COMPRESSOR/LIMITER 4 ΕΙΣΟΔΩΝ removeTOA L-1102 2 CHANNEL LIMITER/LEVELLER removeBEHRINGER DEQ2496 Ultra High-Precision Digital Mastering Processor removeARX AFTERBURNER DUAL CH./BAND ENHANCED COMPRESSOR/LIMITER removeSAMSON S-COM4 Four Channel Compressor/Gate Processor removeAVALON AD2055 DUAL MONO PURE CLASSA PARAMETRIC MUSIC EQUALIZER remove
Image
SKUDBX 1046L-1102E005263AFTERBURNERSCOM 4AD2055
Rating
Price 443.00 με ΦΠΑ 24% 564.32 με ΦΠΑ 24% 437.00 με ΦΠΑ 24% 403.00 με ΦΠΑ 24% 215.00 με ΦΠΑ 24% 4,250.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

DBX-1046
Compressor - limiter 4 εισόδων, κύκλωμα "overeasy“, peakstoplus,
είσοδοι - έξοδοι XLR και 1/4 TRS. Κατάλληλος για studio, live χρήση.

  • Four independent channels of operation, stereo linkable in two pairs
  • PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
  • Independent Threshold and ratio controls
  • Switchable OverEasy® or Hard Knee compression
  • Classic dbx® compression
  • Differentially balanced gold-plated XLR and 1/4" inputs and outputs
  • True RMS level detection
  • Precision metering of input level, output level, and gain reduction
  • Dual True stereo or quad mono operation
  • Switchable +4dBu or -10dBV operation per channel

 

Input Connectors XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input > +22 dBu balanced or unbalanced
CMRR Typically >50 dB at 1 kHz
Output Connectors XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type Servo-balanced/unbalanced, RF filtered
Output Impedance Balanced 30 Ohm, unbalanced 15 Ohm
Max Output > +22 dBm balanced, > +20 dBm unbalanced
Bandwidth 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response 0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range > 118 dB, unweighted
THD+Noise >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling True RMS Power Summing
Compressor Threshold Range -40 dBu to +20 dBu
Compressor Ratio 1:1 to infinity:1
Compressor Threshold Characteristic Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic AutoDynamic™
Compressor Attack Time Program-dependent
Compressor Release Time Program-dependent
Compressor Output Gain -20 to +20 dB
Limiter Threshold Range 0 dBu to +24 dBu (off)
Limiter Ratio infinity:1
Limiter Type PeakStopPlus® two-stage limiter
Limiter Stage 1 PeakStop® brickwall limiter
Limiter Stage 1 Attack Time Zero
Limiter Stage 1 Release Time Zero
Limiter Stage 2 Predictive intelligent program limiter
Limiter Stage 2 Attack Time Program-dependent
Limiter Stage 2 Release Time Program-dependent
OverEasy® Switch Activates the OverEasy compression function
I/O Meter Switch Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch Activates the direct input-to-output hard-wire bypass
Operating Level Switch (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator 1 LED to indicate PeakStop™ limiting
Function Switches LED indicator for each front-panel switch
Output Transformer Options Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption 20 Watts
Fuse 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector IEC receptacle
Dimensions 1.75“Hx19“Wx9“D (4.4cmx48.3cmx20.1cm)
Unit Weight 5.2 lbs. (2.4 kg)
Shipping Weight 7.6 lbs. (3.5 kg)

 

L-1102 Limmiter / leveller 2 channel, απόκριση συχνότητας 20Hz-20kHz, 4 κιλά και δυνατότητα μετατροπής των in/out σε balanced 1U.

Product Features:

Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology
Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range
4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel)
Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization
Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs
State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications
Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input)
64 user memories for complete setups and/or individual module configurations
Separate mic/line input with phantom power for RTA and Auto-EQ applications
Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical)
Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates
Open architecture allowing future software updates via MIDI
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

acrobat_reader_logo. SKD (Smart Knee Detector) circuit automatically switches from soft to hard knee
based on the level of Input signal applied
Individual Threshold and Ratio controls on each channel
Three-year extended warranty 

The AD2055 combines 100% discrete, pure class A signal amplifiers with state-of-
the-art passive and active filter topologies. The AD2055's unique circuitry delivers
very high resolution transient detail at the operational extremes of real world equalization
demands. The AD2055 auto-bias DC servo loop control eliminates the need for all
interstage capacitor coupling. The AD2055 breathes life into all musical performances!
 
AD2055 FEATURES
Pure Class A, 100% discrete design
Smooth musical detail and sonic excellence
Minimum audio signal path
Dual mono operation
Transparent active and passive filter design
High headroom +30dB Very low noise -94dB
Fully balanced inputs and outputs
DC coupled, no transformers in audio path
Switched frequencies in high and low bands
Mid bands use X10 frequency for extended range
Wide bandwidth -3dB 1Hz to 450kHz
Low distortion less than 0.5% THD and IMD
All signal routing with sealed silver relays Conductive
plastic potentiometers for low noise
External 150W toroidal power supply 100% discrete
power supplies for audio path
Long lasting, stainless steel hardware
 
SONIC EXCELLENCE
The Avalon AD2055 Pure Class A music equalizer is the most powerful, low noise
parametric equalizer available today. Designed to optimize absolute signal integrity
and musical performance, the AD2055 combines the best of active and passive filter
topologies with sonic excellence unequaled by lesser designs. The AD2055 is the
perfect solution for two buss music-program equalization, special instrument EQ and
FX applications and ultra high performance mastering studio's.

Features include state-of-the-art, balanced 100% discrete, Pure Class A signal amplifiers,
practical user features and rugged hardware designed to deliver true high performance
audio for many years. 

PASSIVE-ACTIVE FILTER DESIGN
Avalon equalizers feature the unique combination of both active and passive filter EQ designs.
This special combination enables the AD2055 to deliver high speed transient detail at the
operational extremes of real-world equalization demands. The passive high and low bands offer
alternate musical tone range to the full function active parametric mid bands. Passive equalizers
have long been a favorite with music lovers around the world.  Full bodied, powerful (up to +/-32dB,
64dB range !) and sweet frequency selections are the benefits of the passive high-low EQ bands.
The full bandwidth twin mid bands provide variable frequency selection (X10 frequency multipliers
for very wide range), variable Q (width) and amplitude control.

MINIMUM SIGNAL PATH DESIGN
Avalon's advanced true symmetry design offers high-voltage, large headroom, extended bandwidth
and very low noise. The use of 100% discrete, Pure Class A signal amplifiers give the serious music
professional unlimited sonic character and a natural harmonic detail that enhances the program
material and becomes one with the music itself. The Avalon AD2055 breathes life!

AD2055 SPECIFICATIONS
Circuit Topology  High-voltage 100% discrete, balanced and symmetrical
Class A 
Output Gain Range  Unity Gain 
Maximum Input Level  +30dB balanced XLR pin 2 hot 
Maximum Output Level  +32dB balanced 600 ohms, DC coupled, high-current
discrete Class A 
Input / Output Type  XLR type, pin 2 hot balanced 
Noise 20kHz Unweighted  -94dB (EQ in) 
Distortion THD, IMD  0.5% (typical 0.05% at +6dB 1kHz) 
Frequency Response -3dB  1Hz to 450kHz (input band limited) 
Equalizer Type  Passive high and low bands plus two fully parametric mid
bands 
Bypass  Hard-wire relay bypass for equalizer in-out 
Low Band F1  Passive, amplitude to -32dB to +32dB shelf or peak-dip curve 
F1 Frequency Range  Switched 10 position 18Hz, 25, 30, 50, 72, 100, 150, 215,
300, 450Hz 
Mid Band F2  Active, amplitude to -16dB to +16dB peak-dip curve 
F2 Frequency Range  Variable 35Hz to 450Hz (x10) 350Hz to 4k5Hz, Q (width)
0.3 to 3.0 
Mid Band F3  Active, amplitude to -16dB to +16dB peak-dip curve 
F3 Frequency Range  Variable 160Hz to 2k0Hz (x10) 1k6Hz to 20kHz, Q (width)
0.3 to 3.0 
High Band F4  Passive, amplitude to -26dB to +26dB shelf or peak-dip curve 
F4 Frequency Range  Switched 10 position 1k5Hz, 2k5, 3k5, 5k, 7k2, 10k, 12k5,
15k, 20k, 25kHz 
AC-DC Power  External AC supply, 150w toroidal transformer, 4 pin cable 90v
isolated, 
(B2T Power Supply Included)  100-240v selectable 50/60Hz, 150w max 
Dimensions  19 x 3.5 x 12 in (482 x 88 x 305mm) 
Shipping weight  30lbs (13.6 kg) 

Weight3.50 kg4.00 kg3.50 kg5.20 kg3.40 kg13.60 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 3.50 kg
Βάρος 4.00 kg
Βάρος 3.50 kg
Βάρος 5.20 kg
Βάρος 3.40 kg
Βάρος 13.60 kg