Content |
DBX DRIVE RACK PA
Ψηφιακός επεξεργαστής ηχείων 2 IN x 6 OUT. Διαθέτει είσοδο RTA για μικρόφωνο μετρήσεων, auto ισοστάθμιση μέσω παρεχόμενου αναλυτή φάσματος RTA 28 band, πλήρης compressor, limiter εισόδου/ 2πλος γραφικός ισοσταθμιστής 28 περιοχών, stereo περιοριστής μικροφωνισμών με 12 notch φίλτρα, υπο αρμονικός συνθετητής χαμηλών συχνοτήτων, stereo παραμετρικό EQ 2 περιοχών, stereo limiters εξόδων, 2x3-2x4- 2x5-2x6 συνδυασμοί crossover, XLR in/out, 24bit A/D-D/A, 105dB δυναμική περιοχή, οθόνη ενδείξεων LCD, 10 user μνήμες, 25 factory preset, έτοιμοι συνδυασμοί JBL, CROWN. | DBX 223XS
Ηλεκτρονικό crossover 2 δρόμων με επιλεγόμενη συχνότητα cross,
ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα,
L & R είσοδοι & balanced έξοδοι με XLR.
Overview
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs
Features
- XLR balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx® 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
Specifications
Input Connectors |
XLR (pin 2 hot) |
Input Type |
Electronically balanced/unbalanced, RF filtered |
Input Impedance |
Balanced >50k ohm, unbalanced >25k ohm |
Max Input |
>+22dBu balanced or unbalanced |
CMRR |
>40dB, typically >55dB at 1kHz |
Output Connectors |
XLR |
Output Type |
Impedance-balanaced/unbalanced, RF filtered |
Output Impedance |
Balanced 200 ohm, unbalanced 100 ohm |
Max Output |
>+21dBu balanced/unbalanced into 2k ohms or greater |
Bandwidth |
20Hz to 20kHz, +/-0.5dB |
Frequency Response |
< 3 Hz to > 90 kHz, +0/-3 dB |
Signal to Noise Ratio |
Ref: +4 dBu, 22 kHz measurement bandwidth |
Signal-to-Noise (Stereo Mode) |
>94dB (Low Output), >91dB (High Output) |
Signal-to-Noise (Mono Mode) |
>94dB (Low Output), >93dB (Mid Output), >91dB (High Output) |
Dynamic Range |
> 106 dB, unweighted, any output |
THD+Noise |
< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
Interchannel Crosstalk |
< -80 dB, 20 Hz to 20 kHz |
Crossover Frequencies (Stereo Mode) |
Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
Crossover Frequencies (Mono Mode) |
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
Crossover Filter Type |
Linkwitz-Riley, 24 dB/octave, state-variable |
Low cut Switch |
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
Phase Invert Switch |
Inverts the phase at the output, one switch per output. |
x1 / x10 Switch |
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
Mode Switch |
Selects stereo/mono and 2/3-way operation |
LF Sum Switch |
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
Indicators |
Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
Operating Voltage |
100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ |
Operating Temperature |
32°F to 113°F (0°C to 45°C) |
Power Consumption |
15W |
Power Connector |
IEC receptacle |
Dimensions |
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
Unit Weight |
3.7 lbs. (1.7 kg) |
Shipping Weight |
5.4 lbs. (2.5 kg) |
|
DBX ZONEPRO 641
Όμοιο με το 640 αλλά έλεγχος και ρύθμιση μόνο μέσω pc.
|
Ψηφιακός επεξεργαστής ηχείων 1U, με 2 εισόδους και 6 εξόδους, 24-bit/96 kHz A/D and D/A converters. Διαθέτει διαφορετικούς τύπους eqʼs (LP/BP/HP) για κάθε είσοδο και έξοδο, 60 διαθέσιμες μνήμες. Είναι εφοδιασμένο με Servo-balanced και gold-plated XLR connectors για όλες τις εισόδους και εξόδους.
- 2 analog inputs and 6 analog outputs for maximum flexibility
- High-end 96 kHz converters for ultimate signal integrity and wide dynamic range (120 dB)
- Precise Dynamic EQs for level-dependent equalization and extremely musical Parametric EQs, selectable for all inputs and outputs
- Several types of EQs (LP/BP/HP) for each input and output
- “Zero“-attack Limiters on all output channels for optimal speaker protection
- Four different mono and stereo output operating modes
- Individual crossover filter types (Butterworth, Bessel and Linkwitz-Riley) with selectable roll-off characteristics from 6 to 48 dB/octave
- Adjustable Delays for all inputs and outputs—allow manual or automatic correction for room temperature, phase and arrival time differences
- 60 user-defined internal presets storable
- Servo-balanced, gold-plated XLR connectors for all inputs and outputs
- Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
Ψηφιακός επεξεργαστής ηχείων 3 IN x 6 OUT. Με νέο AutoEQ σύστημα αλγόριθμων. Διαθέτει είσοδο RTA για μικρόφωνο μετρήσεων, αντί ?μικροφωνικό σύστημα AFS, ισοσταθμιστή 31 περιοχών, παραμετρικό EQ 12 περιοχών (8 AutoEQs - 4 UserEQs), γεννήτρια υπό -αρμονικών χαμηλών συχνοτήτων, backline delay, Noise Gate, XLR είσοδοι - έξοδοι, 2 AES ψηφιακές είσοδοι (στις αναλογικές εισόδους 1&2), 6 έξοδοι μονοφωνικών ζωνών crossover, 8 περιοχών παραμετρικό EQ για κούρδισμα των ηχείων, θύρα Ethernet, USB, ασύρματη σύνδεση συμβατό με Android, iOS, Mac, Windows. | Ψηφιακός επεξεργαστής ηχείων 2 in 6 out. Crossover 2x3, 2x4, 2x5 και 2x6 διαμορφώσεις, Είσοδο RTA για μικρόφωνο μετρήσεων, δυνατότητα "κουρδίσματος" της αίθουσας χωρίς την χρήση pink μέσω του Auto EQ εφαρμογής με 28 περιοχές γραφικού equalizer. Νέας σχεδίασης AFS (περιοριστής μικροφωνισμών) με 12 notch φίλτρα, Sub Harmonic Synthesizer, dual stereo equalizer 28 περιοχών linked ή dual mono, stereo 8 περιοχών παραμετρικό equalizer στην είσοδο αλλά και στην έξοδο. Limiter στην έξοδο για προστασία των ηχείων, delay για ευθυγράμμιση των δρόμων των ηχείων (aligment delay). Δυνατότητα απομακρυσμένου ελέγχου μέσω ασύρματου δικτύου via Android, iOS, MAC, Windows συσκευές. 24BIT A/D-D/A/113dB δυναμική περιοχή, οθόνη ενδείξεων LCD με 25 user μνήμες/25 factory preset, έτοιμοι συνδυασμοί ηχείων και ενισχυτών από πληθώρα κατασκευαστών, Led Bar ενδείξεις στο μπροστινό panel με ξεχωριστά mute κουμπιά για κάθε δρόμο, είσοδο USB για σύνδεση με υπολογιστή. Όλοι οι είσοδοι και έξοδοι είναι με βύσματα τύπου XLR.
Input |
(2) line inputs. (1) RTA Mic input |
Input Connectors |
(2) Female XLR line inputs. (1) Female XLR RTA Mic input |
Input Type |
Electronically balanced/RF filtered |
Input Impedance |
>50 kohm |
A/D Converter |
dbx Type IVTM Conversion System |
CMRR |
> 45dB |
Mic Preamp Phantom Power |
+15VDC (RTA) |
Mic Preamp Equivalent Input Noise (EIN) |
|
Output |
(6) Line Outputs |
Output Connectors |
Male XLR |
Output Type |
Electronically balanced, RF filtered |
Output Impedance |
120 Ω |
Max Output |
+20dBu |
A/D Dynamic Range |
112 dB A-weighted, 110 dB unweighted |
Type IV Dynamic Range |
123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW |
Input Delay Length |
100ms |
Alignment Delay |
10ms per channel (60ms total) |
Sample Rate |
48kHz |
Dynamic Range |
>110 dB A-weighted, >107dB unweighted |
THD+Noise |
0.003% typical at +4dBu, 1kHz, 0dB input gain |
Frequency Response |
20Hz - 20kHz, +/- 0.5dB |
Interchannel Crosstalk |
|
Operating Voltage |
100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz |
Power Consumption |
22 W |
Unit Weight |
5.25 lbs. (2.4 kg) |
Shipping Weight |
6.75 lbs. (3.1 kg) |
Dimensions |
1.75" (H) x 5.75" (D) x 19" (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W) |
D/A Dynamic Range |
112 dB A-weighted, 110dB unweighted |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.