DBX DRIVERACK RTA-M REFERENCE MIC FOR DRIVERACK PA Real Time Analyzer Microphone

Omni-directional, flat frequency, measurement microphone.
Μικρόφωνο μετρήσεων για το DRIVERACK PA

Internally switchable proximity effect compensation and sensitivity reduction.

The BCM 104 condenser microphone is the first product in the new Broadcast Line,
which is especially tailored to the demands of professional radio announcing.
What sets the Broadcast Line apart is a completely independent, functionally-
optimized design derived from extensive 3D simulations.
The large-diaphragm condenser capsule used in the BCM 104 has a cardioid directional
pattern with internally switchable proximity effect compensation. A second switch allows
the sensitivity to be reduced by 14 dB.
The microphone headgrill twists off easily for quick cleaning. Neumann offers optional,
color-coded headgrills so that, for reasons of hygiene, each announcer working at an
announcing desk can use his or her individual headgrill.
Directly in front of the capsule, mounted on a frame holder, is a piece of fine gauze that
serves as a built-in popscreen.
The BCM 104 has an elastic mount against structure-borne noise, that is compatible with
standard broadcast-segment microphone arms.

Features:
Cardioid microphone for broadcast & studio
Large diaphragm condenser capsule with
switchable proximity compensation
Distinctive design
Integrated pop screen
Quick release head grille for easy cleaning
Individual head grilles available for each user

Acoustic features
The microphone headgrill houses the K 04 large-diaphragm capsule, which has a flat frequency
response up to 3 kHz. Higher frequencies have an increased presence of 2 dB maximum.
Since the above-mentioned microphone characteristics are obtained without the use of resonance
effects, the microphone features excellent transient response and transmits all transient phenomena
of music and speech without any coloration.
The integrated Pop Screen
A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also
efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from
settling on the diaphragm.
The pop screen can be removed for cleaning without the use of tools.

Electrical features
Instead of a transformer to couple the microphone output to the supply voltage, the BCM 104
has an electronic circuit which, like a transformer, provides for good common mode rejection.
Interference induced in the balanced modulation line is thus suppressed as usual.
With a very low self-noise of 7 dB(A), and an overload capability extending to 138 dB SPL,
the BCM 104 has a dynamic range of 131 dB (DIN/IEC 651).
Filter and Preattenuation
The BCM 104 amplifier has a linear operation down to 20 Hz. An active filter efficiently suppresses
signals below this frequency. In order to compensate for the proximity effect, a high-pass filter,
electronically activated by a switch, is built into the microphone. This filter reduces frequencies
below 100 Hz by 12 dB/octave.
A 14-dB preattenuation switch is provided in order to adjust the sensitivity, if necessary,
to transmission circuits designed for dynamic microphones. But this will increase the
self noise by 14 dB.Both switches are located inside the microphone housing, since they
will normally be operated only once, when the broadcasting facility is set up.
Mounting
The preferred mode of operation is to suspend the BCM 104 from a standard studio boom arm.
A thread adapter to fit different connector threads is included.
In order to provide protection from structure-borne noise, both the capsule and the microphone
in its mount are elastically suspended.
The optional SG 5 swivel mount allows additional angling of the BCM 104 by +/-90 degrees.

Application hint:
While designed to be an announcer's mic for broadcasting and studio, this is
just one of the most common applications. With additional experimentation,
you will gain maximum use from this microphone.

Technical Description:
Acoustical operating principle: Pressure gradient transducer
Directional pattern: Cardioid
Frequency range: 20 Hz -- 20 kHz
Sensitivity at 1 kHz into 1 kohm: 22 mV/Pa
-14 dB attenuation: 4.4 mV/Pa
Rated impedance: 50 ohms
Rated load impedance: 1000 ohms
Equivalent SPL CCIR 468-3: 18 dB
Equivalent SPL DIN/IEC 651: 7 dB-A
S/N ratio CCIR 468-3: 76 dB
S/N ratio DIN/IEC 651: 87 dB
Maximum SPL for THD 0.5%: 138 dB
Maximum SPL for THD 0.5% with preattenuation: 152 dB
Maximum output voltage: 10 dBu
Dyn. range of the mic. amplifier DIN/IEC 651: 131 dB
Supply voltage: 48 V +/- 4 V
Current consumption: 3.2 mA
Matching connector: XLR 3 F
Weight: 500 g
Diameter: 64 mm
Length: 85 mm

Πυκνωτικό μικρόφωνο shotgun με απόκριση συχνότητας 20Hz - 20KHz, ευαισθησία -36 db re 1Mv Pa, κύκλωμα εξαιρετικά χαμηλού θορύβου και υπερκαρδιοειδές πολικό διάγραμμα.Έχει δυνατότητα λειτουργίας και με μπαταρία 1,5 volt.Περιλαμβάνει αντιανέμιο μαλακή θήκη και βάση.

• Ακουστική αρχή : Line plus Gradient.
• Τύπος κάψας : Σούπερ - Καρδιοειδής.
• Απόκριση Συχνότητας : 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
• Αντίσταση Εξόδου : 250 Ù - phantom power, 350 Ù - battery power
• Λόγος σήματος προς θόρυβο din iec 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
• Σχετικό επίπεδο θορύβου: 18 dB SPL (per IEC651, IEC268-15)
• Μέγιστη Στάθμη Εξόδου spl: 131 dB (@ 1% THD into 1 kÙ)
• Ευαισθησία : -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
• Δυναμική περιοχή din iec 651: 113 dB (per IEC651, IEC268-15)
• Τροφοδοσία : 1.5 V Alkaline Battery or P48 Phantom
• Κατανάλωση : 2.0 mA  
• Βάρος χωρίς μπαταρία : 161 g
• Διαστάσεις (Υ x Π x B) : 278 x  22 x 22 mm

• Electret measuring microphone for measuring systems and audio recordings
• Designed for measuring PA systems, speakers and room acoustics
• Perfect complement to any real-time analyzer
• Flat frequency response for high precision
• Sturdy all-metal construction and narrow design
• Polar pattern: Omnidirectional

ΠΥΚΝΩΤΙΚΟ ΜΙΚΡΟΦΩΝΟ ΜΕ 5 ΠΟΛΙΚΑ ΔΙΑΓΡΑΜΜΑΤΑ, ΚΑΨΑ 1'' ΙΝΤΣΑΣ, ΕΝΔΕΙΚΤΙΚΑ LED ΕΠΙΛΟΓΗΣ ΠΟΛΙΚΟΥ ΔΙΑΓΡΑΜΜΑΤΟΣ ΚΑΙ ΥΠΕΡΟΔΗΓΗΣΗΣ ΕΞΟΔΟΥ ΣΗΜΑΤΟΣ, ΕΥΑΙΣΘΗΣΙΑ 23MV/PA, ΑΠΟΚΡΙΣΗ ΣΥΧΝΟΤΗΤΑΣ 20HZ-20KHZ, ΜΕΧΡΙ 158 dB MAX SPL. ΔΙΑΘΕΤΕΙ 3 ΕΠΙΛΟΓΕΣ BASS-CUT FILTER ΚΑΙ 3 ΕΠΙΛΟΓΕΣ ΠΡΟ-ΕΞΑΣΘΕΝΗΣΗΣ ΜΕ ΕΝΔΕΙΚΤΙΚΑ LED. ΠΛΗΡΩΣ ΠΡΟΣΤΑΤΕΥΜΕΝΟ ΑΠΟ ΗΛΕΚΤΡΟΜΑΓΝΗΤΙΚΕΣ ΠΑΡΕΜΒΟΛΕΣ. ΔΥΝΑΤΟΤΗΣ ΕΛΕΓΧΟΥ ΜΕΣΩ REMOTE CONTROL (ΠΡΟΑΙΡΕΤΙΚΑ). ΠΑΡΑΔΙΔΕΤΑΙ ΣΕ ΜΕΤΑΛΛΙΚΗ ΒΑΛΙΤΣΑ ΜΕ ΑΝΤΙΚΡΑΔΑΣΜΙΚΗ ΒΑΣΗ, POP FILTER ΚΑΙ ΑΝΤΙΑΝΕΜΙΟ. ΚΑΤΑΛΛΗΛΟ ΓΙΑ STUDIO RECORDING ΑΚΟΥΣΤΙΚΩΝ ΟΡΓΑΝΩΝ. 3 ΕΤΗ ΕΓΓΥΗΣΗ

Specifications

Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg)