| Content |
DBX ZONEPRO 1260
Ψηφιακός επεξεργαστής αναγγελιών 4 ζωνών. Διαθέτει 12 in/6 out. Διαθέτει agc (automatic gain leveler)
EQ, crossover, limiter, compressor, noise gate, parametric EQ, security lockout, AFS περιοριστή
μικροφωνισμών, RS 232 για έλεγχο και ρύθμιση μέσω PC, ethernet in & out. Δέχεται τα wall panel
dbx ZC. Ιδανικό για: ξενοδοχεία, εμπορικά κέντρα, καταστήματα, bar restaurants, cafe κτλ. δυνατότητα
να συνδεθεί και με άλλες ίδιες μονάδες και να επεκταθεί.
|
Νέα έκδοση S ηλεκτρονικού crossover 3 δρόμων με επιλεγόμενη συχνότητα cross, ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα, L & R είσοδοι & balanced έξοδοι με XLR.
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.
XLR balanced ins and outs
Mode switches for mono 4-way or stereo 2-way/3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant
| Input Connectors | XLR | | Input Type | Electronically balanced/unbalanced, RF filtered | | Input Impedance | Balanced >50k ohm, unbalanced >25k ohm | | Max Input | >+22dBu balanced or unbalanced | | CMRR | >40dB, typically >55dB at 1kHz | | Output Connectors | XLR | | Output Type | Impedance-balanaced/unbalanced, RF filtered | | Output Impedance | Balanced 200 ohm, unbalanced 100 ohm | | Max Output | >+21dBu balanced/unbalanced into 2k ohms or greater | | Bandwidth | 20Hz to 20kHz, +/-0.5dB | | Frequency Response | 90 kHz, +0/-3 dB | | Signal to Noise Ratio | Ref: +4 dBu, 22 kHz measurement bandwidth | | Signal-to-Noise (Stereo Mode) | >94dB (Low Output), >93dB (Mid Output), >90dB (High Output) | | Signal-to-Noise (Mono Mode) | >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output) | | Dynamic Range | > 106 dB, unweighted, any output | | THD+Noise | | | Interchannel Crosstalk | | | Crossover Frequencies (Stereo Mode) | Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting) | | Crossover Frequencies (Mono Mode) | Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz | | Crossover Filter Type | Linkwitz-Riley, 24 dB/octave, state-variable | | Low cut Switch | Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. | | Phase Invert Switch | Inverts the phase at the output, one switch per output. | | x1 / x10 Switch | Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. | | Mode Switch | Selects stereo/mono and 2/3/4-way operation | | LF Sum Switch | Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. | | Indicators | Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) | | Operating Voltage | 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz | | Operating Temperature | 32°F to 113°F (0°C to 45°C) | | Power Consumption | 15W | | Power Connector | IEC receptacle | | Dimensions | 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) | | Unit Weight | 4.0 lbs. (1.8 kg) | | Shipping Weight | 5.8 lbs. (2.6 kg) |
|
The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets.
The absolute latest in available technology is utilized with 32-bit (40-bit extended) floating point processor and high performance 24-bit Analog Converters. The high-bit DSP prevents noise and distortion induced by truncation errors of the commonly used 24-bit fixed-point devices. A complete set of parameters include I/O levels, delay,polarity, 6 bands of parametric EQ per channel, multiple crossover selections and full function limiters. The DX 4008 can be controlled or configured in real time on the panel or with the intuitive PC GUI accessed via the RS 232 interface. Software upgrade for CPU and DSP via PC keeps the device current with newly developed algorithms and function once available. Multiple setup storage and system security complete this professional package.
| Features |
|---|
| The DX 4008 is a complete 4 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets | | Sampling rate can be set to 96kHz | | Precise frequency control is achieved with its 1 Hz resolution | | Inputs and outputs can be routed in multiple configuration to meet any requirements | | The DX 4008 is shipped with a special PC Graphic User Interface (GUI) application - XLink | | XLink gives the user an option to control the DX 4008 unit from a remote PC via the RS232 serial communication link | | The GUI application makes much easier control and monitor the device, allowing the user to get the whole picture on one screen | | Programs can be recalled and stored from/to PC's hard drive, thus expanding the storage to become virtuality limitless |
| INPUT AND OUTPUT SECTION |
|---|
| Input Impendance: | >10 | kΩ | | Output Impendance: | 50 | Ω | | Maximum Level: | + 20 | dBu | | Type: | XLR 3 | Electronically balanced |
| AUDIO PERFORMANCE |
|---|
| Frequency Response: | +/- 0.1 | dB (20 to 20 kHz) | | Dynamic Range: | 115 | dB typ (unweighted) | | CMMR: | > 60 | dB (50 to 10 kHz) | | Crosstalk: | | dB | | Distortion: | 0.001% | (1 kHz @ 18 dBu) |
| DIGITAL AUDIO PERFORMANCE |
|---|
| Resolution: | 32 bit | (40-bit extended) | | Sampling Rate: | 48 / 96 | kHz | | A/D - D/A Converters: | 24 | bit | | Propagation Delay: | 3 | ms | | No. of Programs: | 30 | |
| FRONT PANEL CONTROL |
|---|
| Display: | 4 x 26 | Character Backlit LCD | | Buttons: | 12 Mute Controls 12 Gain / Manu Controls 6 Menu Controls | | | “DATA" control: | (dial encoder) | Embedded Thumb Wheel | | Level Meters: | 5 | segment LED | | Interface | RS 232 | Female DB-9 |
| LIMITERS |
|---|
| Threshold: | -20 to +20 | dBu | | Attack Time: | 0.3 to 100 | ms | | Release Time: | 2 to 32 | X the attack time |
| EQUALISATION |
|---|
| Type: | Parametric, Hi-shelf, Lo-shelf | 6 per I/O | | Gain: | in 0.25dB steps | -30 to +15dB | | Bandwidth: | (Q=0.5 to 72) | 0.02 to 2.50 octaves |
| CROSSOVER FILTERS |
|---|
| Filter Types: | Butterworth, Bessel, Linkwitz Riley | | | Slopes: | 6 to 24dB/oct (96kHz) | 6 to 48dB/oct (48kHz) |
| POWER REQUIREMENT |
|---|
| Operating voltage: | 220÷240 / 110÷120 ~ 50 / 60 | V ~ Hz | | Power (consumption): | | mA | | Fuse model: | | | | Operating temperature range: | 0 ÷ +55 | °C | | Operating humidity: | 20 ÷ 90 | % RH non-condensing |
| PHISICAL SPECIFICATION |
|---|
| Height: | 44 / 1.73 | mm/inch | | Width: | 483 / 19.01 | mm/inch | | Depth: | 203 / 7.99 | mm/inch | | Net Weight: | Kg/Lbs | 3 / 6.61 |
| SHIPPING INFORMATION |
|---|
| Package height: | 80 / 3.14 | mm/inch | | Package width: | 615 / 24.2 | mm/inch | | Package depth: | 360 / 14.17 | mm/inch | | Shipping Weight: | 4.3 / 9.4 | Kg/Lbs |
|
The LD DPA260 is a 6-Channel 19" Speaker Processor for our VA-4, VA-8 and UNO-Array with plenty of useful setups for each system
- Type: DSP Controller for Line Array VA-4, VA-8 and UNO
- Model Name: DPA-260
- Description: 6-Channel 19" speaker processor, 32bit DSP, 24bit AD/DA (48 kHz) converter
- Inputs: 2 Channels Analog/Digital, L + R, Noise Gate, the inputs and outputs are freely assignable, that means you can assign any input to any output and vice versa
- Input EQ: 5 Band PEQ, Low Shelf and High Shelf Types available
- Crossover Range: 20 Hz - 20 kHz
- Outputs: 6 Channels, High/Low Pass Filter, Filtertype and dB available, 7 Band PEQ, Low Shelf and High Shelf Types available, Limiter with Threshold, Attack and Release Parameters
- Delay: Time or Meter available, Max. Delay up to 848 ms
- Phase Invert Function: USB Port, Full programmable Software included with 24 Memory Capacity for Presets
- Display: 2 × 16 character LCD with backlight
- Switch mode power supply: 90 V - 250 V
- Dimensions: 19" / 1U
|
| Τροφοδοσία ρεύματος: |
100-240 V AC, 50/60 Hz
6 V DC 800 mA |
| Σύνδεση ρεύματος: |
Είσοδος δικτύου μέσω ομοαξονικού βύσματος τροφοδοσίας (M) καλώδιο τροφοδοσίας με μετασχηματιστή εναλλασσόμενου ρεύματος (παρέχεται) |
| Εύρος συχνοτήτων: |
10 - 30000 Hz |
| THD: |
<0,005 % at 1 kHz |
| DSP: |
Ψηφιακός επεξεργαστής σήματος |
| Αντίσταση: |
Είσοδος: 10 kOhm
Έξοδος: 50 Ohm |
| Gain: |
Έξοδος: -50 dB to +12 dB |
| Φίλτρο: |
Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct |
| Καθυστέρηση: |
0 - 5 ms |
| Δυναμικό εύρος: |
Είσοδος: 114 dB
Έξοδος: 110 dB |
| Sample rate: |
67 kHz |
| Συνδέσεις: |
Είσοδος: line μέσω 2 x 3-pin XLR
Έξοδος: line μέσω 6 x 3-pin XLR |
| Συχνότητα Crossover: |
20-20000 Hz |
| Max. level: |
Είσοδος: +22 dBu
Έξοδος: +9 dBu |
| USB θύρα: |
Τύπος B |
| Σύνδεση PC: |
DXO Λογισμικό μέσω USB, το λογισμικό μπορεί να ενημερωθεί |
| Σχεδιασμός περιβλήματος: |
(19") 48.3 cm εγκατάσταση ραφιού 1 U |
| Διαστάσεις: |
Πλάτος: 48,3 cm
Βάθος: 12,8 cm
Ύψος: 4,45 cm |
| Βάρος: |
1,77 kg |
| Λειτουργικό σύστημα: |
Win XP, Win Vista, Win 7, Win 10, OS X 10,5 ή καλύτερα |
| Behringer CX-3400 3-Way Stero/4-Way Mono Frequency Crossover with Limiters
The CX3400 is an active frequency crossover enabling 2 or 3-way stereo or even 4-way mono operation. Each band features two 24-dB Linkwitz-Riley filters, as well as individual IGC limiters, while the integrated delay enables flexible time alignment. Polarity switches for each output allow quick and easy runtime compensation for various driver and horn types.2
Respectively:
3-Way stereo or 4-way mono
24 dB / octave Linkwitz-Riley filter
Mono-Sub switchable
LF / HF gain regular / mutable
CD horn EQ switchable
Vertex frequency tunable
Factor switching (10x)
Multi-band limiter switch / variable (threshold)
Limit display each way
LF Delay (max 2ms / 60cm)
Phase reverse
25 Hz subsonic filter, sym
XLR in / out with multiband limiters
Dimensions: 19", 1U, 147 mm case depth
Weight: 1.7 kg |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.