DIGITAL SOUND 8928 Ντεσιμπελόμετρο dB meter

93.00 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο Διαθέσιμο Κωδικός προϊόντος: 8928 Κατηγορία:
Digital Sound 8928 SPL Meter with Built-In Measurement Mic – calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret […]

 

Διαβάστε περισσότερα

Digital Sound 8928 SPL Meter with Built-In Measurement Mic – calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery.

A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.

  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery

 

Βάρος 0.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “DIGITAL SOUND 8928 Ντεσιμπελόμετρο dB meter”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

DIGITAL SOUND 8928 Ντεσιμπελόμετρο dB meter removeDBX CT-2 CABLE TESTER Καλωδίων removeWORK CABLE ANALYZER removeAMERICAN AUDIO DB DISPLAY MKII Ντεσιμπελόμετρο removePalmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester removeBEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester remove
NameDIGITAL SOUND 8928 Ντεσιμπελόμετρο dB meter removeDBX CT-2 CABLE TESTER Καλωδίων removeWORK CABLE ANALYZER removeAMERICAN AUDIO DB DISPLAY MKII Ντεσιμπελόμετρο removePalmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester removeBEHRINGER CT200 Microprocessor-Controlled 8-in-1 Cable Tester remove
Image
SKU8928DBX CT-2CABLE ANALYZE010254AHMCTDMXE010300
Rating
Price93.00 με ΦΠΑ 24% 64.43 με ΦΠΑ 24% 131.75 με ΦΠΑ 24% 85.00 με ΦΠΑ 24% 29.08 με ΦΠΑ 24% 55.00 με ΦΠΑ 24%
Stock

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα

AvailabilityΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Digital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery.

A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.

  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery

 

Cable tester για τον έλεγχο καλωδίων, διαθέτει περιστροφικό επιλογέα έξι θέσεων για έλεγχο έως και 5 pins καθώς και έλεγχο της εσωτερικής μπαταρίας, tester με led ενδεικτικά και buzzer με την χρήση banana connectors, ελέγχει speakon 4 επαφών, XLR (αρσενικό /θηλυκό) 3 επαφών, RCA, ΒΝC, MIDI (5-pin DIN), DMX (5-pin), 1/4? TRS.

This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.

We all know how frustrating and time consuming it can be when your audio cables fail. With the dbx CT2 cable testing unit you can now evaluate a large variety of your cables with ease. The CT2 offers many common connectors such as Speaker Twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, & Banana. The CT2 allows for testing cables even with different connectors at each end. For example, it is simple to test a TRS to XLR cable. With well illuminated LED indicators and a simple rotary dial, users can quickly establish whether a cable is wired and functioning correctly, or if it is dead and in need of repair.

Features
  • 6-position rotary selector with individual LEDʼs for up to five pins plus internal battery life check
  • ʽBananaʼ connector continuity tester with beeper and LED indicator
  • Super-rugged construction for durability and longer life
  • (2) Speaker Twist connectors for testing of 4 pin->to pin connections
  • (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
  • (2) RCA Phono connectors for testing of 2 pin->to pin connections
  • (2) BNC connectors for testing of 2 pin->to pin connections
  • (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
  • (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
  • (2) 1/4” TRS connectors for testing of 3 pin->to pin connections
  • (2) Banana connectors for testing of 1 pin->to pin connections
    Specifications
Power Requirements 9V battery (Battery not included)
Dimensions 3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H)
 

 

 

Συσκευή ελέγχου καλωδίων, διαθέτει βύσματα: ΝΕUTRIK, SPEACON, XLR-3, XLR-5,
DIN-5, DIN-6, 3mm JACK και BNC, με διακόπτες επιλογής αυτόματου ή manual
διακόπτη και φωτεινές ενδείξεις. Λειτουργεί με μπαταρία PP3 9V συμπεριλαμβάνονται:
θήκη προστασίας και 2 καλώδια ελέγχου κοντά.
 

Κατασκευαστής AMERICAN AUDIO
Rack Mount Ναι
Μοντέλο DB DISPLAY MKII
Part Number 1151800005
Εγγύηση 2 Χρόνια Εγγύηση
Details The all metal DB DISPLAY MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer. Specifications • Designed to set in an amp rack to view your decibel level • Creates a great light show in your amp rack • Display progresses from green through amber to red • Sensitivity adjustment on both left and right channels • 2 separate modes: dot and bar • Includes 5V power supply • Line Inputs: Left & Right RCA / Left & Right XLR • Line Outputs: Left & Right RCA / Left & Right XLR • Voltage Operation: DC 5V, 500mA Power Supply included • Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm • Weight: 2.5 lbs. / 1.25kg.

Palmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester MCT DMX This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unitʼs 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options.

 

  • Tests 3-pin and 5-pin DMX cables for continuity
  • Also tests 3-pin XLR microphone cables
  • Automatic test mode or manual pin 1 - 5 selection
  • LED indicators
  • Mounting brackets included

 

Product type Test Equipment
Connectors XLR (3-pin) , XLR (5-pin)
Controls Auto Scan , On / Off , Scan switch
Indicators LED chain
Operating voltage 2 x AA battery
Acoustic continuity test no
Test cable no
Cabinet material sheet steel
Cabinet surface powder coated
Width 240.2 mm
Height 48 mm
Depth 53 mm
Weight 0,7 kg

 

  • Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
  • Accepts all standard connectors: XLR, Speakon*, TRS (1/4“, 1/8“), RCA, RJ45, MIDI and USB
  • Super-easy operation with intuitive LED display
  • Continuity check and intermittent contact detection
  • Phantom-power and ground-shield check
  • Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
  • Operates with 2 AA size batteries (not included)
  • Designed and engineered in Germany
Weight0.50 kg1.00 kg1.00 kg1.50 kg0.80 kg2.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 0.50 kg
Βάρος 1.00 kg
Βάρος 1.00 kg
Βάρος 1.50 kg
Βάρος 0.80 kg
Βάρος 2.00 kg