DRAWMER DS201 – Dual Noise Gate

664.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Κατόπιν Παραγγελίας Κατόπιν Παραγγελίας Κωδικός προϊόντος: UA12283 Κατηγορία:
The DS201 is a sophisticated dual channel noise gate incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates. Features: Variable high pass and low pass filters for “frequency conscious” gating. Comprehensive envelope control, attack, hold, decay, and range. Key input for external triggering. […]

 

Διαβάστε περισσότερα

The DS201 is a sophisticated dual channel noise gate incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates.

Features:

  • Variable high pass and low pass filters for “frequency conscious” gating.
  • Comprehensive envelope control, attack, hold, decay, and range.
  • Key input for external triggering.
  • “Key Listen” facility.
  • Extremely fast attack time, to preserve the natural attack of the sound.
  • Balanced inputs and outputs.
  • Stereo linkable.
  • Can be used for “Gating” or “Ducking“.
  • High audio specification.

These features and its “user friendliness” have made it the “industry standard” throughout the world.

Setting up noise gates can be tedious and unrewarding. For example, when attempting to separate a signal from unwanted noise or crosstalk that is relatively high in level, spurious triggering of the gate by unwanted components within the sound can be a serious problem. This can often be experienced in the studio when recording a drum kit. If a gate is used to clean up the snare drum sound it is quite likely that the nearby hi-hats will spill into the snare drum microphone and cause the gate to open. Increasing the threshold level may cure this problem, but then there is a very real danger that any quieter snare drum beats may not cause the gate to open at all and the performance can easily be ruined.

The DRAWMER solution to this problem is the inclusion of two variable filters, one high-pass and one low-pass, which act upon the side-chain keying circuitry. By setting the output switch to key listen the user can hear the action of the filters and adjust them to reject high frequency spillage from the hi-hats. This now enables the gate to only open on the lower frequencies present in the snare drum.

Drawmer pioneered the concept of frequency conscious gating, and the Drawmer DS201 was the first noise gate to include this feature. 

The very fast attack of the DS201 means that it can open in a matter of micro seconds, thus preserving the natural attack of whatever sound is being gated and the comprehensive envelope controls mean that the gain can be changed at whatever rate best suits the material being processed. With vocals for example, a fairly fast attack is needed so as not to clip the leading consonants but a slower release time will prevent the end of words being clipped off and will also fade out any noise gradually rather than cutting it off abruptly. This latter point is very important as the human ear is far more sensitive to rapidly changing noise levels than to a constant low level noise.

Another important role played by the gate is in the reshaping of existing sounds. An example of this might involve a simple sampling delay line used to store a sound to be re-triggered later and added to a mix. A gate can be used to impart a slower attack or faster decay to the sound and careful setting of the decay envelope can effectively hide any noise present at the end of the sample. When using a sampler or drum machine the gate can be considered a triggered envelope shaper, and the wide range allowed by the envelope controls make the DS201 ideal for this application.

The unit can be switched to accept a key input, which allows the gate to be triggered externally. An example of this would be to use a snare drum signal to open the gate on a separate ambient microphone to create a natural alternative to gated reverb.

Each channel can be individually switched from Gating to Ducking for ‘voice over’ applications or the removal of ‘clicks’ and ‘pops’.

Βάρος 3.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “DRAWMER DS201 – Dual Noise Gate”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

DRAWMER DS201 - Dual Noise Gate removeShure DP11EQE Ψηφιακός επεξεργαστής σήματο με Gate, Expander removeDBX 266XS COMPRESSOR/GATE 2CH removeAxel Technology Boxtel MKII Basic Telephone Hybrid (Τηλεφωνικό υβρίδιο ) removeDBX 1046 COMPRESSOR/LIMITER 4 ΕΙΣΟΔΩΝ removeBEHRINGER FBQ100 DIGITAL FEEDBACK SUPPRESOR remove
NameDRAWMER DS201 - Dual Noise Gate removeShure DP11EQE Ψηφιακός επεξεργαστής σήματο με Gate, Expander removeDBX 266XS COMPRESSOR/GATE 2CH removeAxel Technology Boxtel MKII Basic Telephone Hybrid (Τηλεφωνικό υβρίδιο ) removeDBX 1046 COMPRESSOR/LIMITER 4 ΕΙΣΟΔΩΝ removeBEHRINGER FBQ100 DIGITAL FEEDBACK SUPPRESOR remove
Image
SKUUA12283DP11EQEDBX 266XSBoxtel MKIIDBX 1046E005280
Rating
Price664.00 με ΦΠΑ 24% 422.00 με ΦΠΑ 24% 162.00 με ΦΠΑ 24% 446.00 με ΦΠΑ 24% 443.00 με ΦΠΑ 24% 95.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Σε απόθεμα

Μόνο 1 απομένουν σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΣε απόθεμαΜόνο 1 απομένουν σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The DS201 is a sophisticated dual channel noise gate incorporating a number of features pioneered by Drawmer, which are invaluable to the sound engineer, and not found on conventional noise gates.

Features:
  • Variable high pass and low pass filters for "frequency conscious" gating.
  • Comprehensive envelope control, attack, hold, decay, and range.
  • Key input for external triggering.
  • “Key Listen" facility.
  • Extremely fast attack time, to preserve the natural attack of the sound.
  • Balanced inputs and outputs.
  • Stereo linkable.
  • Can be used for "Gating" or "Ducking“.
  • High audio specification.

These features and its "user friendliness" have made it the "industry standard" throughout the world.

Setting up noise gates can be tedious and unrewarding. For example, when attempting to separate a signal from unwanted noise or crosstalk that is relatively high in level, spurious triggering of the gate by unwanted components within the sound can be a serious problem. This can often be experienced in the studio when recording a drum kit. If a gate is used to clean up the snare drum sound it is quite likely that the nearby hi-hats will spill into the snare drum microphone and cause the gate to open. Increasing the threshold level may cure this problem, but then there is a very real danger that any quieter snare drum beats may not cause the gate to open at all and the performance can easily be ruined.

The DRAWMER solution to this problem is the inclusion of two variable filters, one high-pass and one low-pass, which act upon the side-chain keying circuitry. By setting the output switch to key listen the user can hear the action of the filters and adjust them to reject high frequency spillage from the hi-hats. This now enables the gate to only open on the lower frequencies present in the snare drum.

Drawmer pioneered the concept of frequency conscious gating, and the Drawmer DS201 was the first noise gate to include this feature. 

The very fast attack of the DS201 means that it can open in a matter of micro seconds, thus preserving the natural attack of whatever sound is being gated and the comprehensive envelope controls mean that the gain can be changed at whatever rate best suits the material being processed. With vocals for example, a fairly fast attack is needed so as not to clip the leading consonants but a slower release time will prevent the end of words being clipped off and will also fade out any noise gradually rather than cutting it off abruptly. This latter point is very important as the human ear is far more sensitive to rapidly changing noise levels than to a constant low level noise.

Another important role played by the gate is in the reshaping of existing sounds. An example of this might involve a simple sampling delay line used to store a sound to be re-triggered later and added to a mix. A gate can be used to impart a slower attack or faster decay to the sound and careful setting of the decay envelope can effectively hide any noise present at the end of the sample. When using a sampler or drum machine the gate can be considered a triggered envelope shaper, and the wide range allowed by the envelope controls make the DS201 ideal for this application.

The unit can be switched to accept a key input, which allows the gate to be triggered externally. An example of this would be to use a snare drum signal to open the gate on a separate ambient microphone to create a natural alternative to gated reverb.

Each channel can be individually switched from Gating to Ducking for 'voice over' applications or the removal of 'clicks' and 'pops'.

Ψηφιακός δυναμικός επεξεργαστής με λειτουργίες gate και expander. Παρέχει αυτόματο έλεγχο gain, compressor και limiter για την προστασία του συστήματος.Η είσοδος είναι combo με 1/4 καρφί και XLR. Διαθέτει δυο εξόδους 1/4 καρφί και XLR.Παραμετρικό equalizer για 9 μπάντες.


Νέα έκδοση S Compressor gate/expander 2 εισόδων κύκλωμα "autodynamic" είσοδοι - έξοδοι XLR κατάλληλος για γενική χρήση.

Bring a more professional sound to your mix

Adding a dbx® 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments.

dbx knows compressors...after all we invented them! The 266xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.

Features
  • Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
  • New gate timing algorithms ensure the smoothest release characteristics
  • Program-adaptive expander/gates
  • Great sounding dynamics control for any type of program material
  • Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
  • Stereo or dual-mono operation
  • Balanced inputs and outputs on 1/4" TRS and XLR connectors
  • Side Chain insert
  • Classic dbx® "Auto" mode
 Specifications
Input Connectors 1/4" TRS and female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance 40kΩ balanced/unbalanced
Max Input >+22dBu Balanced or Unbalanced
Output Connectors 1/4" TRS, female XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance +4dBu: 100Ω balanced, 50Ω unbalanced; -10dBu: 1kΩ balanced, 500Ω unbalanced
Max Output >+21dBu balanced/unbalanced into 2kΩ or greater; >+18dBm balanced/unbalanced (into 600Ω)
Sidechain 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
Sidechain Impedance Tip = >10kΩ (Input), Ring = 2kΩ (Output)
Sidechain Max Input Level Tip = >+22dBu (Input)
Sidechain Max Output Level Ring = >+20dBu (Output)
Compressor Threshold Range -40dBu to +20dBu
Compressor Threshold Characteristic Selectable OverEasy® or hard knee
Compressor Ratio 1:1 to Infinity:1
Compressor Attack Time Scalable Program-Dependent AutoDynamic™
Compressor Release Time Scalable Program-Dependent AutoDynamic™
Expander/Gate Threshold Range -60dBu to +15dBu
Expander/Gate Ratio 1:1 to 4:1
Expander/Gate Attack Time

Manual

Axel Compact telephone hybrid BoxTel MKII

 

AXEL Compact telephone hybrid. Management of 1 wired PSTN / POTS line, electronically balanced input and output on XLR connector

Product Discription:

BoxTel MKII is an analogue telephone hybrid, designed to interface a telephone line with audio equipments. BoxTel MKII manages 1
POTS/PSTN line, whereas BoxTel GSM manages 1 GSM line to establish telephone connections where wired lines are not present.

A powerful internal microcontroller completely manages both BoxTel MKII and BoxTel GSM, allowing the configuration of the operating modes
via software. The internal microcontroller provides further functions such as adjustment of the line impedance according to the region,
visualization of the Send/Receive audio levels on the front leds, line detecting presence of a telephone line, buzzer with adjustable level,
AutoHook - automatic line hooking and answering after a certain number of rings. While BoxTel MKII is operative, its possible to exclude or
keep connected in parallel an external telephone set (Tel.Set).

The backlit Hook/Ring button on the front panel allows a quick management of the phone calls; each time a telephone call is incoming the
BoxTels Hook/Ring button starts to flash, by pressing it the operator answer the phone call. BoxTel MKII has the Line Detecting function,
which makes the Hook/Ring button switch on in presence of a telephone line.

BoxTel MKII and BoxTel GSM are devices equipped with an internal power supply enabling great audio performance: two separate
Send/Receive front potentiometers manage the audio level, with a total range of +/- 15dB. The input sensitivity is set at 0dBu while the
maximum output level is greater than +20 dBu.

The audio connections are separated for Send/Receive and are available over XLR electronically balanced connectors. A RJ11C connector
allows the telephone line connection (Tel.Line) and one more RJ11C connector performs the connection to an external telephone set (Tel.Set).
A GPIO port with optocouplers and open collector is provided to establish remote connections between BoxTel MKII and BoxTel GSM and
mixing console. It is possible to connect directly the Telco module of an Oxygen4, Oxygen5 and Oxygen7 console with BoxTel MKII/BoxTel GSM
by using a simlpe Pin-to-Pin cable. Internal universal power supply 90-264Vac/47-63Hz to operate worldwide.

Thanks to all of their features, BoxTel MKII and BoxTel GSM represent the telephone hybrids with the best quality/price ratio available on the
marketplace. BoxTel MKII and BoxTel GSM occupy ½ rack unit - LxHxD 22x5x13cm.

HIGHLIGHTS:

  • Compact telephone hybrid
  • 1 POTS/PSTN or GSM DualBand telephone line
  • Send/Receive audio levels control and visualization
  • Backlit Hook/Ring button
  • Software configuration
  • Phone call auto-answer feature
  • International selection of the line impedance
  • Remote control
  • Potentiometer levels and front panel control
  • Analogue Send/Receive balanced over XLR
  • 1 USB port
  • GPIO to remotely control Telco N-1 modules
     
Technical Facts:
  • Dimension LxHxD 22x5x13cm
  • AC Rate 230Vac / 110Vac 50 Hz / 60 Hz 30VA
  • Type of power supply Switching power supply, worldwide
  • Weight ≈ 2500 gr
  • Operating Temperature -5°C / +50°C

    ANALOG INPUT MODULE (send)
  • Connectors: XLR, female - Electronically balanced
  • Operative Nominal Level: 0 dBu
  • Line Impedance 10 kΩ (Electronically balanced selectable) EMIsuppressed
  • Distortion: less than 0.01% TDH+NOISE (0.0dBu 1Khz)
  • Input Modes: Mono

    ANALOG OUTPUT MODULE
    (receive)
  • Connectors XLR, male - Electronically balanced
  • Output Level 0dBu +4dBu +6dBu Max +20dBu
  • Load Impendance 600 Ω
  • Distorsion Less than 0.01% TDH+NOISE (0.0dBu @ 1Khz)
  • Output Modes: Mono

    TELEPHONE MODULE PSTN / POTS
  • Connectors LINE RJ 11C 6/4 socket
  • Connectors SET RJ 11C 6/4 socket
  • Bandwidth telephone line 100Hz 5kHz, -3dB @ 1 kHz
  • Telephone line compliance ETSI TBR21, FCC Part68
  • Isolation 3 kV

    REMOTE INTERFACE
  • Digital Inputs GP In 2x GP In opto coupled. Only 1 is used as Hook
  • Digital Outputs GP Out 2x GP Out Open Collector opto isolated. Only GPOut 1 is used as Ring

    Technical Specification about BoxTel MKII GSM (Additional )
  • TELEPHONE MODULE GSM Module
  • Standard DualBand GSM 900/1800 Mhz Phase 2+
  • Frequency GSM 900: (Tx) 890 915 Mhz / (Rx) 935 960 Mhz
  • GSM 1800: (Tx) 1710 1785 Mhz / (Rx) 1805 1880 Mhz
  • Sensitivity -104 dB
  • Channel bandwidth 200 kHz
  • Maximum consumption 0.25 W / 0.5W
  • Stand-by consumption
  • Sensitivity -104 dB
  • Dial tone frequency 450 Mhz Standard
  • Environment noise
  • Transmitting Power
  • External Antenna 2.5 dBi omnidirectional with 1mt standard cable
  • External power supply unit Input: 100-240 Vac Output: 12 V 500 mA
  • External Antenna connector SMA
  • Total rechargeable battery time 6 h
  • PSTN / POTS connector RJ 11C 6/4 socket
  • Operating temperature 0°C ≈ +45°C
  • EN COMPLIANCY for GSM Modul EN 60950-1
  • EN 301 489-1/-7
  • EN 301 511

DBX-1046
Compressor - limiter 4 εισόδων, κύκλωμα "overeasy“, peakstoplus,
είσοδοι - έξοδοι XLR και 1/4 TRS. Κατάλληλος για studio, live χρήση.

  • Four independent channels of operation, stereo linkable in two pairs
  • PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
  • Independent Threshold and ratio controls
  • Switchable OverEasy® or Hard Knee compression
  • Classic dbx® compression
  • Differentially balanced gold-plated XLR and 1/4" inputs and outputs
  • True RMS level detection
  • Precision metering of input level, output level, and gain reduction
  • Dual True stereo or quad mono operation
  • Switchable +4dBu or -10dBV operation per channel

 

Input Connectors XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input > +22 dBu balanced or unbalanced
CMRR Typically >50 dB at 1 kHz
Output Connectors XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type Servo-balanced/unbalanced, RF filtered
Output Impedance Balanced 30 Ohm, unbalanced 15 Ohm
Max Output > +22 dBm balanced, > +20 dBm unbalanced
Bandwidth 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response 0.35 Hz to 90kHz, +0/-3 dB
Noise
Dynamic Range > 118 dB, unweighted
THD+Noise >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain),
IMD
Interchannel Crosstalk
Stereo Coupling True RMS Power Summing
Compressor Threshold Range -40 dBu to +20 dBu
Compressor Ratio 1:1 to infinity:1
Compressor Threshold Characteristic Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic AutoDynamic™
Compressor Attack Time Program-dependent
Compressor Release Time Program-dependent
Compressor Output Gain -20 to +20 dB
Limiter Threshold Range 0 dBu to +24 dBu (off)
Limiter Ratio infinity:1
Limiter Type PeakStopPlus® two-stage limiter
Limiter Stage 1 PeakStop® brickwall limiter
Limiter Stage 1 Attack Time Zero
Limiter Stage 1 Release Time Zero
Limiter Stage 2 Predictive intelligent program limiter
Limiter Stage 2 Attack Time Program-dependent
Limiter Stage 2 Release Time Program-dependent
OverEasy® Switch Activates the OverEasy compression function
I/O Meter Switch Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch Activates the direct input-to-output hard-wire bypass
Operating Level Switch (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator 1 LED to indicate PeakStop™ limiting
Function Switches LED indicator for each front-panel switch
Output Transformer Options Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption 20 Watts
Fuse 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector IEC receptacle
Dimensions 1.75“Hx19“Wx9“D (4.4cmx48.3cmx20.1cm)
Unit Weight 5.2 lbs. (2.4 kg)
Shipping Weight 7.6 lbs. (3.5 kg)

 

Μονοκάναλο feedback destroyer (αντιμικροφωνικό) με ενσωματωμένο προενισχυτή μικροφώνου, delay line, noise gate και compressor. Ανιχνεύει αυτόματα τους μικροφωνισμούς και τους εξαφανίζει. Διαθέτει επίσης low cut filter, phantom power, balanced in/out.

Χαρακτηριστικά:

    Μονοκάναλο feedback destroyer (αντιμικροφωνικό) με ενσωματωμένο προενισχυτή μικροφώνου, delay line, noise gate και compressor
    Αυτόματα ανιχνεύει και εξολοθρεύει 8 συχνότητες μικροφωνισμών
    Ultra low noise mic/line είσοδος με gain control και +48V phantom power τροφοδοσία για πυκνωτικό μικρόφωνο
    Delay line μέχρι 2,5 sec και με ρύθμιση μέτρων ποδιών και msec
    Noise gate με αυτόματες και manual ρυθμίσεις
    Αυτόματο compressor
    Low cut filter με ρύθμιση συχνότητας
    Είσοδος – έξοδος σε balanced JACK 6,35 και XLR
    Frequency response: 10H – 21KHz
    Noise: 92dB (line), 89dB mic
    THD: 0.007%
    Μετατροπείς: 24bit Sigma-Delta, 64/128-times oversampling
    Η συσκευασία περιλαμβάνει: fbq100, users manual
    Τροφοδοσία: AC 220V / 50Hz
    Διαστάσεις: 56 x 88 x 132 mm
    Βάρος: 380 gr

Weight3.50 kg3.00 kg3.00 kg0.50 kg3.50 kg0.38 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 3.50 kg
Βάρος 3.00 kg
Βάρος 3.00 kg
Βάρος 0.50 kg
Βάρος 3.50 kg
Βάρος 0.38 kg