Content | Product Description
Dreher & Kauf original Swiss made , Technics EPS 23CS – Diamond Stylus for Turntable
Replacement Aftermarket Stylus: Technics EPS 23CS.
Specs:
Conical Diamond Tip 0.3×0.7 mil
Tracking Force: 1.0 – 2.0 grams Pressure
Stylus Color: Blue
16 or 3 or 45 rpm NOT for 78rpm
Swiss Made
Suitable to replace the following stylus models:
Technics-Panasonic:TECHNICS SL3 SL5 SLD1 SLD3 SLD202 SLQ202.
and many more! |
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
| Bελόνα Πικάπ για την κεφαλή της Numark CS-1. | Technical data
Output |
3,5 mV |
|
Frequency response |
10-25.000 Hz dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
30 µm/mN |
Stylus type |
Spherical |
Stylus tip radius |
R 15 µm |
Tracking force range |
1,25-1,75 g (12,5-1,75 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
Recommended for following cartridges |
Dual TKS 49S |
Recommended for following cartridges - Dual TKS 49 S
*) Typical value |
Ortofon 14 Stylus Technical Data
Frequency range 20-22.000 Hz
Frequency response 20-20.000 Hz + 2 / - 2 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 25 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,0-1,5 g (10-15 mN)
Tracking force, recommended 1,25 g (12,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges TM 14U |
| DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.