Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, […]
Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
: > 75 dB </li><li>Voltage Gain (selectable): 26 / 32 / 38 dB </li><li>Input Sensitivity: 4.0 / 2.0 / 1.0 V </li><li>Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (SOA Sentry Protection) </li><li>Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch </li><li>Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System) </li><li>Connectors: <ul><li>Input: 2 x XLR </li><li>Line Output: 2 x XLR </li><li>Speaker Output: 2 x Speakon</li></ul> </li><li>Power Supply: 230 V - 50 Hz </li><li>Dimensions (W x H x D): 483 × 88.9 × 310 mm</li></ul></td><td>
<p>Τελικός ενισχυτής 2U ισχύος 2 Χ 1300 Watt/4Ω με απόκριση συχνότητας 20Hz - 20KHz. Βάρος 19 Kg. Διαθέτει ρύθμιση ευαισθησίας εισόδου (0,775V/1,0V/1,44V), Limiter και φίλτρα Low pass & High pass για σύνδεση με sub ή δορυφόρο. Διαθέτει εισόδους balanced XLR/JACK και εξόδους ηχείων σε Speakon & Binding post.</p></td><td><p>
Crown DSi 4000 2x1200W-4Ω Τελικός Ενισχυτής
</p>
<p>
Τελικός Ενισχυτής Switching, ισχύος 2x1200W@4Ω, bridged 3200W@4Ω, ενσωματωμένο DSP για κάθε κανάλι, είσοδοι τύπου Phoenix & HD-15, έξοδοι τύπου Barrier Strip, διαχείριση μέσω με Η/Υ (USB) συμβατότητα με HiQnet. Κατάλληλος για κινηματογραφική χρήση, 15 έτοιμα εργοστασιακά preset για κινηματογραφικά ηχεία JBL. Βάρος 8,6 Kg.
</p></td><td>
<p>
This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%. <br>
A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode.<br>
The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling. <br>
The integral soft clip limiter protects against damage to the connected loudspeakers. <br>
The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.
</p>
<table><tbody><tr><th>AMPLIFIER SPECIFICATIONS</th> </tr><tr><td>Power output stereo 2Ω:</td><td>2 x 1600 Watt rms</td><td> </td></tr><tr><td>Power output stereo 4Ω:</td><td>2 x 1100 Watt rms</td><td> </td></tr><tr><td>Power output stereo 8Ω:</td><td>2 x 700 Watt rms</td><td> </td></tr><tr><td>Power output bridged 4Ω:</td><td>3200 Watt rms</td><td> </td></tr><tr><td>Power output bridged 8Ω:</td><td>2200 Watt rms</td><td> </td></tr><tr><td>Frequency Response:</td><td>20 Hz ÷ 20 kHz </td><td> </td></tr><tr><td>Signal/noise rate:</td><td>> 102 dB</td><td> </td></tr><tr><td>Crosstalk:</td><td>> 65 dB</td><td> </td></tr><tr><td>Distortion (THD+N):</td><td></td><td> </td></tr><tr><td>Intermodulation:</td><td></td><td> </td></tr><tr><td>Damping factor:</td><td>400:1 (8 W)</td><td> </td></tr><tr><td>Slew rate:</td><td>50 V/μS</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>INPUT SECTION</th> </tr><tr><td>Input connector:</td><td>2 x XLR balanced, 6,3mm jack unbalanced</td><td> </td></tr><tr><td>Input sensitivity:</td><td>0 / 0.775 dBm/V RMS</td><td> </td></tr><tr><td>Input impedance: </td><td>20.000 kΩ</td><td> </td></tr><tr><td>Controls:</td><td>Volume control for each channel</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>OUTPUT SECTION</th> </tr><tr><td>Output connector:</td><td>2 x Neutrik Speakon 4 ways</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>SYSTEM PARAMETERS</th> </tr><tr><td>Cooling:</td><td>Two-speed fan</td><td> </td></tr><tr><td>Protections:</td><td>Thermal, temperature, direct current, short circuit, RFI</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>POWER REQUIREMENT</th> </tr><tr><td>Operating voltage:</td><td>220÷240 / 110÷120 ~ 50 / 60 V ~ Hz </td><td> </td></tr><tr><td>Max.current:</td><td>16 A</td><td> </td></tr><tr><td>Power Consumption:</td><td>6500 W</td><td> </td></tr></tbody></table>
<table> <tbody><tr><th>PHYSICAL SPECIFICATIONS </th> </tr><tr><td>Height:</td><td>132 / 5.19 mm/inch</td><td> </td></tr><tr><td>Width:</td><td>483 / 19.01 mm/inch</td><td> </td></tr><tr><td>Depth:</td><td>455 / 17.91 mm/inch</td><td> </td></tr><tr><td>Net Weight:</td><td>29.5 / 65.03 Kg/Lbs</td><td> </td></tr></tbody></table>
<table><tbody><tr><th>SHIPPING INFORMATION</th> </tr><tr><td>Package height:</td><td>200 / 7.87 mm/inch</td><td> </td></tr><tr><td>Package width:</td><td>575 / 22.63 mm/inch</td><td> </td></tr><tr><td>Package depth:</td><td>555 / 21.85 mm/inch</td><td> </td></tr><tr><td>Shipping Weight:</td><td>32.5 / 71.64 Kg/Lbs</td></tr></tbody></table>
<p>
</p></td><td>
<p>
HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).<br>
<br>
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.<br>
A forced air cooling system maintains a low operating temperature.
</p>
<table><tbody><tr><th>Features</th> </tr><tr><td>Fast response and low distortion</td></tr><tr><td>Easy to configure in stereo / mono / bridge modes</td></tr><tr><td>Extensive protective circuits ensure high reliability and operating safety</td></tr><tr><td>Front panel signal / clip / protect LED indicators</td></tr><tr><td>Minimum load impedance (stereo / mono): 2 Ohm</td></tr><tr><td>XLR input connectors</td></tr><tr><td>SPEAKON output connectors</td></tr><tr><td>2 unit 19 "acrobat_reader_logo."){kind=logo}
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.