Content |
The Dynacord PowerSub 315 is an active 15” subwoofer with four integrated digital power amps, providing total output power of 2000W.
Dynacord PowerSub 315 provides an additional output for the connection of external subwoofers, for it to be equally used in active stereo applications employing up to two additional external subwoofers.
The PowerSub 315 offers connection for a total of up to four 8 ohms satellite speakers and up to two additional passive 8 ohms subwoofers. Power amp output capacity is automatically distributed to the connected speaker systems when switching between operation modes using the ‚MODEʽ switch on the rear of the appliance. Four castors, two carrying handles and an integrated pole-mount stand flange facilitate transport and set-up of center subwoofer and stereo satellite systems.
Dynacord PowerSub 315 features include:
Amplifier PowerSub (switchable to 2 x 500 W / 4 Ohms) 1000 W / 8 Ohms
Amplifier Power MID-HIGH 2 x 500 W / 4 Ohms
SPL 1W/1m 99 dB
Max. SPL 1m (calculated) 129 dB
Sub Transducer LFS 1008 (364 853)
Switchable X-Over Frequencies 80 Hz, 100 Hz, 160 Hz
Dimensions W x H x D 464 x 601 x 660 mm
Weight 45 kg
|
User's manual
LD Systems STINGER SUB 15 A G3
Active 15" bass-reflex PA subwoofer
- Active 15” bass reflex PA subwoofer
- High-efficiency 450 watts RMS digital power stage and 133 dB max. SPL
- 15” custom design woofer for extended low end down to 40 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
STINGER SUB 15 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 15 A G3 is powered by high efficiency Class D amplification with a mighty 450 watts RMS output. It drives a custom designed 15” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 15 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 15 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
15 "
Woofer Size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
450 W
Peak power
900 W
Frequency response
40 - 200 Hz
Max. SPL (peak)
133 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
567 mm
Height
477 mm
Depth
624 mm
Weight
31,9 kg
|
- Powered 2.1 PA with 15" subwoofer and two 8" satellites
- Total power: 2060 W
- Integrated 6-channel mixer with EQ and reverb
- Selectable input for microphone, Hi-Z or Line
- Digital SPDIF TOSLINK stereo input
- Wireless streaming via Bluetooth
- Homogeneous dispersion thanks to newly developed waveguides
- DynX® DSP for distortion-free sound reproduction
- Selectable presets depending on the setup (stereo / cluster mode)
- Durable polyurea coating for subwoofer and satellites
General
Product type
PA Complete Systems
System output (RMS)
1030 W
System output (Peak)
2060 W
Max. SPL (Avarage)
124 dB
Frequency response (-10dB)
33 - 20000 Hz
Crossover frequency
105 Hz
Dispersion (H x V)
90° x 30 °
Subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Multiplex, 18 mm Multiplex
Subwoofer features
3 Reverb presets, 6 channel mixer, Bluetooth, Cluster / Stereo Preset, M20, SPDIF
Mid/Hi System
Midrange dimensions (mm)
203.2 mm
Midrange brand
Custom-made
Midrange voice coil
1.5 "
Midrange voice coil
38.6 mm
Tweeter dimensions
2 x 0.5 "
Tweeter dimensions (mm)
2 x 12.7 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Mid/Hi system speaker connections
1
Mid/Hi system speaker connections
Speakon compatible
Cabinet construction mid/high
Bass Reflex
Carrying Handles Mid / Hi System
1
Mid/Hi system cabinet material
12 mm Multiplex, 15 mm Multiplex
Mid/Hi system cabinet surface
Polyurea
Mid/Hi system width
275 mm
Mid/Hi system height
470 mm
Mid/Hi system depth
260 mm
Mid/Hi system weight
9.7 kg
Mid/Hi system features
Dual - Tilt flange, Midrange Waveguide
Amplifier module (integrated in subwoofer)
Amplifier output subwoofer (RMS)
500 W
Amplifier Output Mid/Hi (RMS)
2 x 265 W
Protection circuits
limiter, overload, short circuit
Operating Temperature
0°C - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
Input type, Input volume, Low / High EQ, Main volume, Power, Reverb, Stereo / Cluster mode, Sub / High level
Indicators
Limit, Power, Protect, Signal
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Multi input
2 x switchable (MIC, LINE, HI-Z)
Multi input connector
Combo XLR
Line input connectors
Combo XLR, RCA
Digital input connectors
SPDIF
Speaker output connections
Speakon compatible
Bluetooth Audio Decoder
SBC
|
- Two channel XLR/1/4 combination inputs
- Delay 0-150ms
- Power amp VU meter with LCD display
- Mic/line level selection
- Internal temperature monitor with variable speed cooling fan
- Auto power off
- On-board advanced digital signal processing
- Setup Wizard for easy configuration
- Heavy-duty locking casters
- Assignable crossover
- Ultra-braced cabinet assembly
- Direct-Thru output with combine function
- Power amp forced air cooling for maximum reliability
- Processed Thru output enables DSP to be used with external speaker cabinet
- Dual 15" woofers
- Ground lift
- Bass enhancement
- Pole mount
- Digital compression/limiting; 9-band EQ
- Heavy-duty steel perforated grille
- 2,000 Watts total peak power
- Weight Packed: 70.3 kg
- Width Packed: 72.39 cm
- Height Packed: 97.79 cm
- Depth Packed: 64.77 cm
|
The NX S25-A is a vented, high output, active subwoofer system where the solid sound of a dual 15” woofer is desired.
This subwoofer is optimally designed for portable or install applications and it is engineered to complement full-range loudspeakers in a wide range of PA applications.
Features |
---|
1000 Watt Digipro digital amplifier | 136 dB max spl | 2x15" woofer, high power 3" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | Max SPL: | 136 dB | | Woofer: | 2 x 15“, 3" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Stereo combo xlr-jak | | Output connectors: | Stereo xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 80 / 110 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, xover / link, frq. cut, phase | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 1000 Watts | | Low frequencies: | 1000 Watts | | Cooling: | Convection / forced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | Stacking fittings | | Handles: | 4 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 750 / 29.52 mm/inch | | Width: | 660 / 25.98 mm/inch | | Depth: | 700 / 27.55 mm/inch | | Net Weight: | 60.5 / 133.37 Kg/Lbs |
| Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
- 1400W ultraefficient Class-D amplifier
- Built-Like-A-Tank to conquer every gig while lightweight for easy loading
- Frequency response: 40 Hz to 20 kHz
- Max SPL: 129 dB
- 15” high-performance woofer
- 1” compression driver
- Outdoor mode optimizes voicing for open air venues
- Built-in Feedback Eliminator reduces squeals and out of control rumble
- Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
- Front LED On/Off switch
- Standard pole mount
- M10 flypoints for permanent install
- Monitor wedge provides optimal angle for use as a floor monitor
- Universal power supply
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
- Music: Made to enhance pre-recorded music
- Live: Great for general sound reinforcement
- Club: Provides a low-end punch
- Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
- Bluetooth connectivity for streaming, speaker linking, and control
- Download the Thump Connect 2 app for complete wireless control
- Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
- Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
- Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
- Thru output contains audio from both input channels
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.