The PSD 215 and PSD 218 are high-performance powered subwoofers designed to simplify creating active 2-way systems. They use an integrated 2-channel digital power amplifier with internal 24-bit 1-in-3 DSP controller to optimize the sound quality and protect the subwoofer and full range system used with it. Examples for such systems are combinations of PSD […]
The PSD 215 and PSD 218 are high-performance powered subwoofers designed to simplify creating active 2-way systems. They use an integrated 2-channel digital power amplifier with internal 24-bit 1-in-3 DSP controller to optimize the sound quality and protect the subwoofer and full range system used with it. Examples for such systems are combinations of PSD subwoofers with full-range D-Lite, Corus and VariLine and the new TS 400 array cabinet.
Both models are vented direct-radiators exhibiting outstanding transient response and capable of delivering very high sound pressure levels. The enclosures are made from well braced 18 mm Baltic birch plywood with a protective coating capable of withstanding the rigors of use on the road. Recessed handles are ergonomically shaped to ensure easy transportation and setting-up – tasks further facilitated by the tour grade castors. A recessed stand adaptor with an M20 thread is provided on the top of the enclosure for the pole-mounting of full-range systems. The horizontal format of the enclsoure allows placement beneath the stage or provides an exceptionally stable base for pole-mount speakers.
The PSD 215 is equipped with a 15″ Electro-Voice DVX3159 woofer specially developed for use in compact subwoofers it sets a new standard for minimum size and maximum acoustic output. While maintaining impressive deep bass high sound pressure levels. The PSD 218 with an 18″ Electro-Voice DVX3180 long-excursion woofer delivers the performance demanded of 18″ subwoofers in professional concert sound applications. It produces extended low frequency response from a compact enclosure with plenty of punch.
Both models use a highly efficient Class D technology amplifier a microprocessor-controlled switched-mode power supply to deliver 2 x 1,000 watts RMS into 4 ohms for highest quality audio performance All DYNACORD power amplifiers are capable of withstanding the most extreme rigors of touring, they are protected against overheating, overload, short circuit, back EMF and open-circuit operation as well as HF or DC at the output. Thermal stability is assured by an extremely quiet continuously variable speed fan. The units are also equipped with intelligent thermal limiters that track voice coil operating temperature that allow maximum output without failure. being any noticeable reduction in loudness. PROTECT and LIMIT LEDs indicate the current operating status of the power amplifiers.
The integrated 24-bit digital controller with internal 48-bit double-precision resolution exhibits a 1-into-3 topology: SUB channel, TOP channel and an additional DSP Out.
The stored factory presets are optimized for combinations with TS 400, Corus 12″ and 15“, CXM 15, D-Lite 12.3 and 15.3, as well as VariLine full-range cabinets and generic presets for other combinations and special programs for cardioid and bass arrays are also provided. The system-/alignment-delay, the polarity and naturally also the level can be edited by the user. The input EQ, the settings of which can be saved, allows adjustments to be made for the acoustics of the room. The DSP Out also offers an adjustable delay, low-cut and shelving equalizer as well as a level control. It is therefore ideally adapted, among other things, to the use of an active delay box. Signal generators with pink noise or spike pulses are integrated to facilitate tuning the PA and the setting of delay times. In all, 25 program locations are provided (20 factory presets + 5 user memories). All three channels are equipped with state-of-the-art look-ahead peak anticipation limiters, the SUB channel also has a temp limiter.
Βάρος
47.60 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “DYNACORD PSD 218 – ΕΝΕΡΓΟ ΗΧΕΙΟ SUBWOOFER 18” 1000W (ΜΑΥΡΟ)” Ακύρωση απάντησης
The PSD 215 and PSD 218 are high-performance powered subwoofers designed to simplify creating active 2-way systems. They use an integrated 2-channel digital power amplifier with internal 24-bit 1-in-3 DSP controller to optimize the sound quality and protect the subwoofer and full range system used with it. Examples for such systems are combinations of PSD subwoofers with full-range D-Lite, Corus and VariLine and the new TS 400 array cabinet.
Both models are vented direct-radiators exhibiting outstanding transient response and capable of delivering very high sound pressure levels. The enclosures are made from well braced 18 mm Baltic birch plywood with a protective coating capable of withstanding the rigors of use on the road. Recessed handles are ergonomically shaped to ensure easy transportation and setting-up – tasks further facilitated by the tour grade castors. A recessed stand adaptor with an M20 thread is provided on the top of the enclosure for the pole-mounting of full-range systems. The horizontal format of the enclsoure allows placement beneath the stage or provides an exceptionally stable base for pole-mount speakers.
The PSD 215 is equipped with a 15" Electro-Voice DVX3159 woofer specially developed for use in compact subwoofers it sets a new standard for minimum size and maximum acoustic output. While maintaining impressive deep bass high sound pressure levels. The PSD 218 with an 18" Electro-Voice DVX3180 long-excursion woofer delivers the performance demanded of 18" subwoofers in professional concert sound applications. It produces extended low frequency response from a compact enclosure with plenty of punch.
Both models use a highly efficient Class D technology amplifier a microprocessor-controlled switched-mode power supply to deliver 2 x 1,000 watts RMS into 4 ohms for highest quality audio performance All DYNACORD power amplifiers are capable of withstanding the most extreme rigors of touring, they are protected against overheating, overload, short circuit, back EMF and open-circuit operation as well as HF or DC at the output. Thermal stability is assured by an extremely quiet continuously variable speed fan. The units are also equipped with intelligent thermal limiters that track voice coil operating temperature that allow maximum output without failure. being any noticeable reduction in loudness. PROTECT and LIMIT LEDs indicate the current operating status of the power amplifiers.
The integrated 24-bit digital controller with internal 48-bit double-precision resolution exhibits a 1-into-3 topology: SUB channel, TOP channel and an additional DSP Out.
The stored factory presets are optimized for combinations with TS 400, Corus 12" and 15“, CXM 15, D-Lite 12.3 and 15.3, as well as VariLine full-range cabinets and generic presets for other combinations and special programs for cardioid and bass arrays are also provided. The system-/alignment-delay, the polarity and naturally also the level can be edited by the user. The input EQ, the settings of which can be saved, allows adjustments to be made for the acoustics of the room. The DSP Out also offers an adjustable delay, low-cut and shelving equalizer as well as a level control. It is therefore ideally adapted, among other things, to the use of an active delay box. Signal generators with pink noise or spike pulses are integrated to facilitate tuning the PA and the setting of delay times. In all, 25 program locations are provided (20 factory presets + 5 user memories). All three channels are equipped with state-of-the-art look-ahead peak anticipation limiters, the SUB channel also has a temp limiter.
Active 18” bass reflex PA subwoofer
High-efficiency 800 watts RMS digital power stage and 135 dB max. SPL
18” custom design woofer for extended low end down to 35 Hz
DynX® DSP technology for distortion-free performance
80, 100 and 120 Hz low pass presets
Cardioid subwoofer array presets
Horizontal or vertical placement
18 mm birch ply cabinet with ultra rugged polyurea finish
Ergonomic handles and stacking recesses for easy transport and setup
Shock-resistant front grill provides maximum speaker protection
Insert for M20 threaded poles
Smart transport accessories
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
18 "
Woofer Size
457.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
RMS
800 W
Peak power
1600 W
Frequency response
35 - 200 Hz
Max. SPL (peak)
135 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
677 mm
Height
547 mm
Depth
740 mm
Weight
42,6 kg
Features
700 Watt digital amplification
132 dB max spl
18" High power woofer, 4" voice coil
Xover selector, phase switch and high pass outputs
Electronic equalization, soft limiter and protection
Stereo Xlr/Jack combo input, Stereo Xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 40 Hz ÷ Xover point kHz
Max SPL: 132 dB
Woofer: 18“, 4" voice coil
Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite
Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.
Application: Subwoofer
Output Power: 600 Watt
Built-in stereo X-over
Very punchy High-power Subwoofer for Bands and DJʼs
Model
PR:O 18 Sub A
Title
PREMIUM PR:O
Product Class
Active Systems
Frequency response +/- 3 dB
48 Hz – Xover
Frequency response -10 dB
38 Hz – Xover
Maximum SPL, @ 10% THD
125 dB
Connections
2x XLR Kombi Line In balanced,2x XLR L/R Out Mid/High,2x XLR Through balanced
LF Speaker
1x18“
X-Over
75 Hz – 150 HZ, switchable
Subsonic filter
35 Hz
Peak limiter
yes
RMS-Soundlimiter
no
Amplifier
600 W Class D – 4 ohms
Pole mount
M20 threaded base plate
Handles
2, integrated
Enclosure
MDF
Grille
metal grille with acoustic foam
Finish
acrylic painture, black
Dimensions (WxHxD)
53 cm x 61 cm x 64 cm
Weight
39,8kg / 87.8 lbs.
Features
- Powered horn-bass subwoofer system
– High output 18″ loudspeaker
– Polarity switch
– Filtered output defeat switch
– Variable 100 -160 Hz high-pass filter
– Gain control
The Avant 118A is a powered rear-loaded horn-bass subwoofer system designed to provide extended bass response for the Avant full-range cabinets.
A 1250 W Class D amplifier drives a D.A.S. 18LX log excursion bass loudspeaker. The 18LX loudspeaker incoporates a 4″ voice coil for high power handling and output.
The Avant 118A incorporates a 1250 W Class D amplifier with switch mode power supply (SMPS) and digital signal processing (DSP).The amplifier has a unique EQ switch which allows the user to select a Deep subbass response or a Loud bass response. The system includes two balanced inputs with stereo filtered output connections for satellite systems. The variable crossover ranges from 100 Hz-160 Hz and can be defeated to offer stereo "loop thru” connections. A gain control and polarity reverse feature increase user control over the system.
Technical Data
Nominal LF Amplifier Power
1250 W (Class D)
Frequency Range (-10 dB)
Loud: 50 Hz – 142 Hz
Deep: 45 Hz -138 Hz
Rated Peak SPL at 1 m
136 dB
Internal Crossover
Variable 100-160 Hz
Connectors
INPUT: 2 x Female XLR
LOOP THRU: 2 x Male XLR
AC INPUT: PowerCon NAC 3
AC OUTPUT: Powercon NAC 3
AC Requirements
115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz
Current Draw (1/3 power @ 230 V)
2.7 A
Enclosure Material
Birch Plywood
Color/Finish
Black/Iso-Flex Paint
Dimensions (H x W x D)
84 x 60 x 65.5 cm
33 x 23.6 x 25.8 in
Weight
55 kg (121 lb)
Αυτοενισχυόμενο Subwoofer MACKIE SRM 1850, 1600W (Peak) Class D ενισχυτής, 18" ηχείο με 3" πηνίο, ενσωματωμένο DSP, είσοδοι 2 x XLR, 2 x Full Range XLR OUT και 2x High Pass XLR OUT (για σύνδεση δορυφόρων με έτοιμη τη συχνότητα crossover), μαύρα τελειώματα, βάση τύπου Pole.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.