ELECTRO VOICE CPS 2T 600W POWER AMPLIFIER

Καταργήθηκε

1,576.72 με ΦΠΑ 24%

Εξαντλημένο

CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Καταργήθηκε Καταργήθηκε Κωδικός προϊόντος: CPS 2T Κατηγορία:
CPS-2T CPS-2T Power Amplifier w/70v/100v Operation The Electro-Voice CPS-2T amplifier is a very high-quality power amplifier designed to elicit excellent performance from any speaker system as well as 70.7V and 100V lines. Its low distortion and substantial headroom ensure that program material will be accurately amplified. Each channel of the CPS-2T delivers more than 330-watts […]

 

Διαβάστε περισσότερα

CPS-2T
CPS-2T Power Amplifier w/70v/100v Operation

The Electro-Voice CPS-2T amplifier is a very high-quality power amplifier
designed to elicit excellent performance from any speaker system as well
as 70.7V and 100V lines. Its low distortion and substantial headroom
ensure that program material will be accurately amplified. Each channel of
the CPS-2T delivers more than 330-watts continuous average power into 8
ohms and 600 watts into 4 ohms. In its transformer-isolated dual mode, it
can deliver more than 580 watts into 70.7 or 100-volt lines. In the bridged mode
at 1 kHz, the amplifier can deliver more than 1,200 watts into 8 ohms at less
than 1% THD. Both direct and transformer-isolated outputs may be used simultaneously.
The power supply with its large toroidal transformer gives the amplifier impressive
headroom and current-output.  

Specifications
Continuous rated power (1k Hz, THD 1%) 2? 850 Watts 
Continuous rated power (1k Hz, THD 1%) 4? 600 Watts 
Continuous rated power (1k Hz, THD 1%) 8? 380 Watts 
Continuous rated power
(20-20k Hz, THD

Βάρος 26.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “ELECTRO VOICE CPS 2T 600W POWER AMPLIFIER”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

ELECTRO VOICE CPS 2T 600W POWER AMPLIFIER removePHONIC MAX-2500 PLUS Τελικός Ενισχυτής 2Χ750W removeINTER-M L-1800 AMPLIFIER 2X600W removeDYNACORD SL-2400 / 230V Power Amplifier 2400 Watts removeMC2 Audio E15 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x850W 4ohm 230V removeRCF ED1100 EXTENDED DYNAMIC STEREO POWER AMPLIFIER 1100W , 2 IN remove
NameELECTRO VOICE CPS 2T 600W POWER AMPLIFIER removePHONIC MAX-2500 PLUS Τελικός Ενισχυτής 2Χ750W removeINTER-M L-1800 AMPLIFIER 2X600W removeDYNACORD SL-2400 / 230V Power Amplifier 2400 Watts removeMC2 Audio E15 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x850W 4ohm 230V removeRCF ED1100 EXTENDED DYNAMIC STEREO POWER AMPLIFIER 1100W , 2 IN remove
Image
SKUCPS 2TH06PH00017L-1800E009262E15ED1100
Rating
Price1,576.72 με ΦΠΑ 24% 449.00 με ΦΠΑ 24% 1,186.00 με ΦΠΑ 24% 1,245.00 με ΦΠΑ 24% 2,079.48 με ΦΠΑ 24% 716.10 με ΦΠΑ 24%
Stock

Εξαντλημένο

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 5 απομένουν σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΕξαντλημένοΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 5 απομένουν σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Διαβάστε περισσότερα

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

CPS-2T
CPS-2T Power Amplifier w/70v/100v Operation

The Electro-Voice CPS-2T amplifier is a very high-quality power amplifier
designed to elicit excellent performance from any speaker system as well
as 70.7V and 100V lines. Its low distortion and substantial headroom
ensure that program material will be accurately amplified. Each channel of
the CPS-2T delivers more than 330-watts continuous average power into 8
ohms and 600 watts into 4 ohms. In its transformer-isolated dual mode, it
can deliver more than 580 watts into 70.7 or 100-volt lines. In the bridged mode
at 1 kHz, the amplifier can deliver more than 1,200 watts into 8 ohms at less
than 1% THD. Both direct and transformer-isolated outputs may be used simultaneously.
The power supply with its large toroidal transformer gives the amplifier impressive
headroom and current-output.  

Specifications
Continuous rated power (1k Hz, THD 1%) 2? 850 Watts 
Continuous rated power (1k Hz, THD 1%) 4? 600 Watts 
Continuous rated power (1k Hz, THD 1%) 8? 380 Watts 
Continuous rated power
(20-20k Hz, THD

Τελικός ενισχυτής 2 Χ 750 WATTS στα 4Ω, με ενσωματωμένο limiter, είσοδοι cannon και jack 1/4 TRS, έξοδοι ηχείων speakon & binding post διάστασης 2U. Βάρος 20,2 Kg.

  • Ισχύς Εξόδου : 750W @ 4 Ohms stereo, 500W @ 8 Ohms stereo
  • Τοροειδής μετασχηματιστές για μεγαλύτερη ισχύ και χαμηλότερο θόρυβο
  • Φίλτρο υψηλών συχνοτήτων με επιλογή 30Hz ή 50Hz
  • Είσοδοι XLR & 1/4\' TRS Jack
  • Έξοδοι ηχείων με βύσμα speakon
  • Aνεξάρτητα ρυθμιστικά έντασης για το κάθε κανάλι στην πρόσοψη
  • Ενδεικτικά LED σήματος & peak για ακριβή παρακολούθηση της λειτουργίας του ενισχυτή
  • Θερμική και RF προατασία
  • Διακόπτης on/off (power)
L1800 600W-600W 4ohm (360W-360W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 1800 W, 4 Ω - 1200 W, 8 Ω - 750 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 3400 W, 4 Ω - 1800 W, 8 Ω - 950 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 3600 W, 8 Ω - 2400 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +6.6 dBu (1.66 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class H Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 17.7 kg (39.0 lbs)

Number of Channels: 2

Output Power: (per channel)

8 ohms     450W
4 ohms  850W
2 ohms 1550W



Output Power: (bridged)

8 ohms 1700W
4 ohms 3100W


THD%: (@1dB below max output)

@ 1kHz

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The 2U amplifier provides 2x550W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 550 Watt rms 
Power output stereo 8Ω:2 x 265 Watt rms 
Power output bridged 8Ω:1100 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Thermal, direct current, RFI, short circuit, transformer protection 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:10 A 
Power Consumption:2200 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:15 / 33.06 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:475 / 18.07 mm/inch 
Shipping Weight:17 / 37.47 Kg/Lbs

 

Weight26.50 kg18.00 kg15.60 kg17.70 kg12.00 kg17.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 26.50 kg
Βάρος 18.00 kg
Βάρος 15.60 kg
Βάρος 17.70 kg
Βάρος 12.00 kg
Βάρος 17.00 kg