ELECTRO VOICE D454377 Woofer 6.5″ για EVID 6.2 ανταλλακτικο μεγάφωνο

Woofer για EVID 6.2 - 6.5“

Μεγάφωνο midrange 6“, 120W, 96dΒ,
2.2kg

B&C 6PEV13 6-1/2" Midrange Speaker

B&C's 6PEV13 6-1/2" midrange speaker features great sensitivity and very smooth response from 400 Hz to 8 kHz. An aluminum phase plug increases the 6PEV13's axial sensitivity and controls its high frequency dispersion. Aluminum voice coil on fiberglass former.

• Nominal Diameter6-1/2“
• Power Handling (RMS)120 Watts
• Power Handling (max)240 Watts
• Impedance8 ohms
• Frequency Response150 to 8,000 Hz
• Sensitivity99 dB 1W/1m
• Voice Coil Diameter1.5“

• Resonant Frequency (Fs)126 Hz
• DC Resistance (Re)5.2 ohms
• Voice Coil Inductance (Le)0.6 mH
• Mechanical Q (Qms)4.6
• Electromagnetic Q (Qes)0.39
• Total Q (Qts)0.36
• Compliance Equivalent Volume (Vas)0.21 ft.³
• BL Product (BL)8.2 Tm
• Diaphragm Mass Inc. Airload (Mms)6g
• Maximum Linear Excursion (Xmax)0.6 mm
• Surface Area of Cone (Sd)132 cm²

• Cone MaterialPaper
• Surround MaterialFoam
• Voice Coil Wire MaterialAluminum
• Voice Coil FormerFiberglass
• Basket / Frame MaterialCast Aluminum
• Magnet MaterialNeodymium

• Overall Outside Diameter7.4“
• Baffle Cutout Diameter5.7“
• Depth3.1“
• Bolt Circle Diameter6.7“
• # Mounting Holes4

• Sealed Volume0.04 ft.³
• Sealed F3299 Hz
• Vented Volume0.11 ft.³
• Vented F3174 Hz

Nominal Diameter     160 mm (6 in)
Overall Diameter     167.4 mm (6.59 in)
Bolt Circle Diameter     154 mm (6.06 in)
Baffle Cutout Diameter     144 mm (5.67 in)
Depth     77 mm (3 in)
Flange and Gasket Thickness     8 mm (0.31 in)
Net Weight     2 Kg (4.41 lb)
Shipping Box
(Single Carton Box)     103x190x185 mm (4.06x7.48x7.28 in)
Shipping Weight     2.6 Kg (5.73 lb)
       

Nominal Impedance     8 Ohm
Minimum Impedance     6.8 Ohm
Nominal Power Handling ***     130 W
Maximum Power Handling ****     260 W
Sensitivity (1W/1m)     95 dB
Frequency Range     85÷6000 Hz
Voice Coil Diameter     37 mm (1.46 in)
Winding Material     Al
Former Material     Kapton
Winding Depth     12 mm (0.47 in)
Magnetic Gap Depth     8 mm (0.31 in)
Flux Density     1 T

Fs     120 Hz
Re     5.9 Ohm
Qes     0.5
Qms     7.3
Qts     0.47
Vas     3.56 dm^3 (0.13 ft^3)
Sd     118 cm^2 (18.29 in^2)
Xmax *     4.67 mm
Xdamage **     10.4 mm
Mms     11 g
Bl     8.2 N/A
Le     0.4 mH
Mmd     9.5 g
Cms     0.18 mm/N
Rms     1 Kg/s
Eta Zero     1 %
EBP     240 Hz

Nominal Specifications

    * Nominal Diameter 6“, 160 mm
    * Overall Diameter 7.34/6.37“, 186.5/162 mm
    * Bolt Circle Diameter 6.77“, 172 mm
    * Baffle Cutout Diameter 5.78“, 147 mm
    * Depth 3.43“, 87.2 mm
    * Flange and Gasket Thickness 0.29“, 7.5 mm


Electrical Specifications

    * Minimum Impedance 6.6 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 150 W
    * Maximum Power Handling**** 300 W
    * Sensitivity (1W/1m) 97 dB
    * Frequency Range 100 - 5000 Hz
    * Voice Coil Diameter 5“, 52 mm
    * Winding Material Aluminium
    * Former Material Glass Fiber
    * Winding Depth 0.26“, 6.66 mm
    * Magnetic Gap Depth 0.24“, 6 mm
    * Flux Density 1.35 T


THIELE & SMALL Parameters

    * Resonant Frequency (fs) 100 Hz
    * DC Resistance (Re) 5.5 Ohm
    * BL Product (BL) 11.6 N/A
    * Diaphragm Mass inc. Airload (Mms) 13.5 grams
    * Mechanical Compliance of Suspension (Cms) 0.19 mm/N
    * Rms 0.96 Kg/s
    * Electromagnetic Q (Qes) 0.35
    * Mechanical Q (Qms) 8.80
    * Total Q (Qts) 0.33
    * Compliance Equivalent Volume (Vas) 0.20 ft³, 5.80 dm³
    * Surface Area of Cone (Sd) 5.82“², 147.8 cm²
    * Maximum Linear Excursion (Xmax)* 2.3 mm
    * Xdamage** 11.6 mm
    * Coil Inductance (Le) 0.28 mH
    * Diaphragm mass (Mmd) 12.7 g
    * Eta Zero 1.63 %

Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power

• 6.5-inch neodymium magnet mid-range driver with 1.75" voice coil, providing 150Wrms (AES) continuous power handling
• Suitable for line array applications, utilising a space efficient chassis profile
• FEA optimised flux distribution in the magnet assembly provides low harmonic distortion
• M-roll surround provides progressive excursion control, generating a smooth frequency response
• Intelligent heat management in both chassis and magnet assembly design offers reduced thermal distortion