ELECTRO VOICE DX46 Ψηφιακός επεξεργαστής ηχείων

Ψηφιακός επεξεργαστής ηχείων, 24 bit Delta-Sigma AD/DA, 2 in 6 out, με διάφορους τύπους φίλτρων και FIR, παραμετρικά EQ, delays, δυναμικούς επεξεργαστές. Ψηφιακή είσοδο AES/EBU (2 Ch.), USB θύρα επικοινωνίας με υπολογιστή, Ethernet
  

A/D Conversion    24-Bit Delta Sigma
Analog Inputs    2
Analog Outputs    6
Control Protocol    USB, Ethernet
D/A Conversion    24-Bit Delta Sigma
Data Format    24-Bit
Digital Inputs    1 XLR AES/EBU (2Ch)
Dynamic Range    116 dB (A-weighted)
Frequency Response    20 Hz - 40 kHz
Input Impedance (Balanced)    10 kΩ
Internal Processing    48-Bit Double Precision
Maximum Input Voltage    8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Maximum Output Voltage    8.7 V / +21 dBu
Nominal Input Voltage    1.55V/+ 6 dBu
Nominal Output Voltage    1.55V/+ 6 dBu
Output Impedance (Balanced)    50 Ω
Sample Rate    48 kHz
THD+N   

Ψηφιακός επεξεργαστής ηχείων 1U, με 2 εισόδους και 6 εξόδους, 24-bit/96 kHz A/D and D/A converters. Διαθέτει διαφορετικούς τύπους eqʼs (LP/BP/HP) για κάθε είσοδο και έξοδο, 60 διαθέσιμες μνήμες. Είναι εφοδιασμένο με Servo-balanced και gold-plated XLR connectors για όλες τις εισόδους και εξόδους.

• 2 analog inputs and 6 analog outputs for maximum flexibility
• High-end 96 kHz converters for ultimate signal integrity and wide dynamic range (120 dB)
• Precise Dynamic EQs for level-dependent equalization and extremely musical Parametric EQs, selectable for all inputs and outputs
• Several types of EQs (LP/BP/HP) for each input and output
• “Zero“-attack Limiters on all output channels for optimal speaker protection
• Four different mono and stereo output operating modes

• Individual crossover filter types (Butterworth, Bessel and Linkwitz-Riley) with selectable roll-off characteristics from 6 to 48 dB/octave
• Adjustable Delays for all inputs and outputs—allow manual or automatic correction for room temperature, phase and arrival time differences
• 60 user-defined internal presets storable
• Servo-balanced, gold-plated XLR connectors for all inputs and outputs
• Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.

The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.

This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.

Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.

Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)

Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.

12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.

The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

• Four Input / Output Card Slots
• Configurable Inputs / Outputs
• Analog Inputs (with Phantom Power per Channel)
• Analog Outputs
• Digital Inputs (AES/EBU and S/PDIF)
• Digital Outputs (AES/EBU and S/PDIF)
• Configurable Signal Processing
• Rich Palette of Processing and Logic Objects
• 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Informative Front Panel Display
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect

• XLR balanced ins and outs
• Mode switch for stereo 2-way or mono 3-way operation
• Low frequency summed (subwoofer) output
• x10 range switch on both channels
• 40Hz high pass (low cut) filter both channels
• Phase reverse switch on all outputs
• Individual level controls on all outputs
• 24dB per octave Linkwitz-Riley filters (the professional standard)
• Stereo/Mono status LEDs indicate the selected mode
• dbx® 2 year parts and labor as standard
• CSA NRTL/C approved
• CE compliant