Content | Χαρακτηριστικά
Product type
Loudspeaker Chassis
Overall diameter
256.29 mm
Pitch Circle Diameter
245.4 mm
Cut- out Measurement
233.17 mm
Diameter of fixing holes
6.35 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
Sensitivity (1 W / 1 m)
99.6 dB
Frequency response
300 - 4000 Hz
Voice Coil Material
Aluminium
Depth of the magnetic gap
7.95 mm
Fs (Resonance Frequency)
326.38 Hz
Re (DC resistance)
5.68 Ohm(s)
Qms (mechanical quality)
7.14
Le (inductance of the voice coil)
0.48 mH
Qes (electrical quality)
2.27
Qts (overall quality)
1.73
Vas (equivalent volume)
1.7
Mms (moving mass)
17.62 g
BL (power factor)
9.5 T/m
Xmax (maximum displacement)
1.5 mm
Cms (elasticity of the suspension)
0.01 mm/N
Sd (membrane area)
350.1 cm²
| |
Nominal Diameter 250 mm (10 in)
Overall Diameter 256.8 mm (10.1 in)
Bolt Circle Diameter 243.8 mm (9.60 in)
Baffle Cutout Diameter 233.8 mm (9.20 in)
Depth 102 mm (4.02 in)
Flange and Gasket Thickness 8 mm (0.31 in)
Net Weight 2.25 Kg (4.96 lb)
Shipping Box
(Single Carton Box) 140x280x282 mm (5.51x11.02x11.10 in)
Shipping Weight 2.6 Kg (5.73 lb)
Nominal Impedance 8 Ohm
Minimum Impedance 6.8 Ohm
Nominal Power Handling *** 150 W
Maximum Power Handling **** 300 W
Sensitivity (1W/1m) 96 dB
Frequency Range 50÷4500 Hz
Voice Coil Diameter 37 mm (1.46 in)
Winding Material Al
Former Material Kapton
Winding Depth 12 mm (0.47 in)
Magnetic Gap Depth 8 mm (0.31 in)
Flux Density 1 T
Fs 55 Hz
Re 5.9 Ohm
Qes 0.7
Qms 9
Qts 0.6
Vas 44 dm^3 (1.55 ft^3)
Sd 327.7 cm^2 (50.79 in^2)
Xmax * 4.67 mm
Xdamage ** 10.4 mm
Mms 22.5 g
Bl 8.2 N/A
Le 0.42 mH
Mmd 20 g
Cms 0.3 mm/N
Rms 0.9 Kg/s
Eta Zero 1.4 %
EBP 79 Hz
|
Mεγάφωνο 10" mid-bass 200W 100dΒ
High efficiency mid-bass, 2.5” aluminium voice coil, with very flat response up to 4 kHz.
Specifications Nominal Diameter 250 mm (10 in.) Nominal Impedance 8 Ω Minumum Impedance 6.9 Ω Power Handling (60 –600 Hz) Nominal1 250 W Continuous Program2 500 W Sensitivity (1W/1m)3 99 dB Frequency Range 60-4000 Hz Voice Coil Diameter 65 mm (2.5 in.) Winding Material Aluminium Former Material Glass Fibre Winding Depth 12 mm (1/2 in.) Magnetic Gap Depth 8 mm (5/16 in.) Flux Density 1.25 T Also available in 16 Ω, data upon request
Thiele & Small Parameters4 Fs 60 Hz Re 5.7 Ω Qes 0.19 Qms 6.3 Qts 0.18 Vas 37 dm.3 (1.3 cu. ft.) Sd 320 cm.2 (49.1 sq. in.) η0 4.1 % X max ± 2.4 mm. Mms 27 gr. Bl 17.7 Tm Le 1.3 mH
Mounting and Shipping Informations Overall Diameter 260 mm. (10.2 in.) Bolt Circle Diameter 244 mm. (9.6 in.) Baffle Cutout Diameter 228 mm. (8.8 in.) Depth 110 mm. (4.3 in.) Flange and Gasket Thickness 17 mm. (2/3 in.) Net Weight 7.1 Kg. (15.6 lb.) Shipping Weight 7.8 Kg. (17.2 lb.) Shipping Box 320x320x160 mm (12x12x6.3 in.)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance. Loudspeaker in free air. 2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 3 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 200 to 4000 Hz. 4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
|
400 W continuous program power capacity 64 mm (2.5 in) aluminium voice coil 60 - 4000 Hz response 98.5 dB sensitivity Neodymium magnet allows a very light yet powerful motor assembly
- Category of diameter 10 inch / 25 cm
- Magnet type Neodymium
- Shape Cylindrical
- External diametre 261 mm
- Mounting diametre 230 mm
- Basket front tickness 12.5 mm
- Depth 109.5 mm
- Znom 8 ohm
- Brand B&C Speakers
- Type Cone driver
- Impedance 8 ohm
- Voice coil diameter 2.5“
- Sensitivity 98.5dB
- Nominal power handling 200W
- Max power handling 400W
- Fs 61Hz
- Re 5.4ohm
- Zmin 6.2ohm
- Qts 0.31
- Qms 5
- Qes 0.33
- Vas 32L
- Sd 320cm²
- Xmax 4mm
- Mms 29gr
- Le 0.5mH
- Efficiency 3%
- EBP 185
- Frequency range 60-4000 Hz
- Forme suspension Double roll
- Forme membrane Exponential
- Spider Single
- Fil bobine Aluminium
- Voice coil former Glass fiber
- Winding depth 12 mm
- Magnetic gap depth 8 mm
- Recommended load 26 L (tuned ar 67 Hz)
- Shipping weight 2.65kg
|
DELTA-10A Series Standard American
Recommended for professional audio and bass guitar applications as a woofer/mid-bass or mid-range in vented monitors, satellites and multi-way enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
10 "
Nominal Diameter
254 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
256.2 mm
Pitch Circle Diameter
245.4 mm
Cut- out Measurement
232.4 mm
Diameter of fixing holes
6.4 mm
Depth
108 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
350 W
maximum rated load
700 W
Sensitivity (1 W / 1 m)
98.8 dB
Frequency response
63 - 3700 Hz
Voice Coil Material
Aluminium
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
66 Hz
Re (DC resistance)
5.42 Ohm(s)
Qms (mechanical quality)
6.53
Le (inductance of the voice coil)
0.74 mH
Qes (electrical quality)
0.35
Qts (overall quality)
0.33
Vas (equivalent volume)
30.5
Mms (moving mass)
32 g
BL (power factor)
14.4 T/m
Xmax (maximum displacement)
3.5 mm
Cms (elasticity of the suspension)
0.18 mm/N
Sd (membrane area)
344.9 cm²
Weight
5,17 kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.