Content | Χαρακτηριστικά
Product type
Loudspeaker Chassis
Nominal Diameter
304.8 mm
Overall diameter
305.5 mm
Pitch Circle Diameter
294.3 mm
Cut- out Measurement
278.1 mm
Diameter of fixing holes
6.4 mm
Nominal Impedance
16 Ohm(s)
Nominal Load Capacity
75 W
Sensitivity (1 W / 1 m)
100 dB
Frequency response
75 - 5.200 Hz
Voice Coil Material
Copper
Depth of the magnetic gap
7.92 mm
Fs (Resonance Frequency)
89.23 Hz
Re (DC resistance)
12.13 Ohm(s)
Qms (mechanical quality)
19.32
Le (inductance of the voice coil)
0.95 mH
Qes (electrical quality)
1.59
Qts (overall quality)
1.47
Vas (equivalent volume)
44.96
Mms (moving mass)
27.53 g
BL (power factor)
10.84 T/m
Xmax (maximum displacement)
0.47 mm
Cms (elasticity of the suspension)
0.12 mm/N
Sd (membrane area)
519.5 cm²
|
Μεγάφωνο subwoofer 12“, 1000W, 95dΒ, 11.8kg
2000 W continuous program power capacity |
|
100 mm (4 in) copper voice coil |
|
45 – 1000 Hz response |
|
95 dB sensitivity |
|
Aluminium demodulating ring allows a very low distortion figure |
|
Double silicone spider with optimized compliance |
|
Ventilated voice coil gap for reduced power compression |
|
Specification Nominal Diameter 320 (12) mm (in) Nominal Impedance (1) 8 Ohm Minimum Impedence 7.5 Ohm Nominal Power Handling (2) 450 W Continuous Power Handling (3) 900 W Sensitivity (1W/1m) (4) 95 dB Frequency Range 40 - 1000 Hz Voice Coil Diameter 76 (3) mm (in) Winding Material Copper Former Material Glass Fibre Winding Depth 22 (0.9) mm (in) Magnetic Gap Depth 10.5 (0.4) mm (in) Flux Density 1.15 T
Thiele & Small Parameters Fs 42 Hz Re 6.1 Ohm Qes 0.22 Qms 3.8 Qts 0.2 Vas 75 (2.6) dm3 (ft3) Sd 522 (80.9) cm2 (in2) Eta Zero 2.4 % Xmax +/- 7 mm Xvar +/- 9 mm Mms 74 g Bl 23.5 Txm Le 2 mH
Mounting and Shipping Info Overall Diameter 316 mm (12.4 in) Bolt Circle Diameter 296 mm (11.6 in) Baffle Cutout Diameter 282 mm (11.1 in) Depth 140 mm (5.5 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 7.6 kg (16.7 lb) Shipping Weight 8.4 kg (18.5 lb) Shipping Box 340x340x170 mm (13.4x13.4x6.7 in) 1For different impedances, please ask. 22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. |
Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.
The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 50W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications Nominal diameter (mm/in) | 305/12 | Power Rating (AES, W rms) | 250 | Nominal impedance (Ω) | 8 | Voice coil diameter (mm/in) | 63.5/2.5 | Magnet type | Ceramic | Magnet weight (kg/oz) | 1.2/42 | Chassis type | Pressed steel | Sensitivity (dB) | 97 | Frequency range (Hz) | 40-4000 | Coil material | Round copper | Former material | Polyimide | Cone material | Kevlar loaded paper | Surround material | Cloth-sealed | Suspension | Single | Xmax (mm/in) | 2.4/0.09 | Gap depth (mm/in) | 8.0/0.31 | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters D (m/in) | 0.26/10.24 | Fs (Hz) | 63 | Mmd (g/oz) | 39.60/1.40 | Mair | | Qms | 6.70 | Qes | 0.54 | Qts | 0.50 | Re (Ω) | 5.13 | Vas (lt/ft3) | 54.5/1.92 | BI (Tm) | 13.20 | Cms (mm/N) | 0.14 | Rms (kg/s) | 2.76 | Le (mH) | | Mounting Information Overall diameter (mm/in) | 309/12.17 | Overall depth (mm/in) | 130/5.12 | Cut-out diameter (mm/in) | 283/11.14 | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | Number of mounting slots | 4 | Mounting slot PCD range (mm/in) | 297/11.69 | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | Single pack weight (kg/lb) | 3/6.6 | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | Multipack (60) weight (kg/lb) | 190/419 |
|
DELTA-12A Standard American
Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.
SPECIFICATION - Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 16 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 55 Hz
- Usable Frequency Range 54 Hz - 5 kHz
- Sensitivity 98.3
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters - Resonant Frequency (fs) 55 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.74 mH
- Mechanical Q (Qms) 5.27
- Electromagnetic Q (Qes) 0.46
- Total Q (Qts) 0.43
- Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
- Peak Diaphragm Displacement Volume 125 cc
- Mechanical Compliance of Suspension 0.21 mm/N
- BL Product (BL) 13.5 T-M
- Diaphragm Mass inc. Airload (Mms) 39 grams
- Efficiency Bandwidth Product (EBP) 120
- Maximum Linear Excursion (Xmax) 2.4 mm
- Surface Area of Cone (Sd) 519.5 cm²
- Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed N/A
Vented 25.5-85 liters/0.9-3 cu.ft. - Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 5.35“, 136 mm
MATERIALS of Construction - Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition felt dust cap
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.