Content |
DMX-Software + Interface USB πρόγραμμα χειρισμού 512 καναλιών μέσω PC για Κινητές κεφαλές, Ρομποτικά, Προβολείς Αλλαγής Χρωμάτων όλων των εταιριών. Εύκολος και γρήγορος προγραμματισμός με τη χρήση γεννητριών για τη δημιουργία X-Pan, Y-Tilt και RGB effects. Διαθέτη μεγάλη βιβλιοθήκη με profiles φωτιστικών καθώς και ιδιαίτερα εύχρηστο profile editor. Πλήρη διαχείριση όλων των παραμέτρων των led φωτιστικών Full RGB (W/A) + dimmer + Matrix editor. Ιδιαίτερα εύχρηστο και φιλικό γραφικό περιβάλλoν, live mode με δυνατότητα πλήρους παραμετροποιήσης των φωτιστικών, ιδανικό για λειτουργία με touch screens. Συμβατότητα με PC, Mac Os X, Windows 32 ή 64 bit (2000, XP, Vista 7). Βάρος: 0,150 kg. Xρήσεις: Clubs, Bars, Πολυκαταστήματα κ.λ.π. (51860150) |
The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
- Type: DMX 512 protocol
- DMX Inputs: 2 (parallel)
- DMX Input Connectors: 3-pin XLR male
- DMX Thru Outputs: 2 (parallel)
- DMX Thru Output Connectors: 3-pin XLR female
- DMX Outputs: 8 (electrically isolated)
- DMX Output Connectors: 3-pin XLR female
- Controls: Power On/Off, DMX Thru Terminator
- Indicators: 8 x Power LED, 8 x Signal LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 230 V AC, 50 Hz
- Power Consumption (max.): 15 W
- Dimensions (W x H x D): 483 x 44 x 160 mm
- Accessories included in package: power cord
|
Τροφοδοσία ρεύματος: |
100-240 V AC, 50/60 Hz
12 V DC 1 A |
Κατανάλωση ενέργειας: |
1 W |
Σύνδεση ρεύματος: |
Είσοδος δικτύου μέσω βιδωτού βύσματος 4 ακίδων (M) έκδοση τοποθέτησης καλώδιο τροφοδοσίας με μετασχηματιστή εναλλασσόμενου ρεύματος (παρέχεται) |
DMX είσοδος: |
2 x 3-pin XLR (M) mounting version |
DMX έξοδος: |
1 x 3-pin XLR (F) mounting version |
Χρήση εμπορικών σημάτων: |
Κατασκευασμένο με βύσματα NEUTRIK |
Διαστάσεις: |
Πλάτος: 13 cm
Βάθος: 7 cm
Ύψος: 4,1 cm |
Βάρος: |
500 g |
| The Cameo W-DMX™ T2 is the successor to the W-DMX T1™ with a higher transmission range and Bluetooth connectivity for configuration. It is a member of Wireless Solution's acclaimed BlackBox series of transceivers for wireless lighting control supporting both transmit and receive modes of DMX and RDM signals in the 2.4 GHz frequency band. Built for professional applications, the roadworthy die-cast metal housing is packed with patented W-DMX™ technologies. These include Adaptive Frequency Hopping to automatically avoid interference created by other wireless networks, and Data-Safe error correction that protects DMX and RDM data from corruption.
The Cameo W-DMX™ T2 features Neutrik 3-pin and 5-pin DMX inputs and outputs, an automatically switching power supply for multi-voltage operation plus a gold-plated Phoenix connector for 12 V battery powering. The G5 transceiver is backward compatible with W-DMX™ G3, G4, G4S and G5 units. It comes with a 3 dBi single-band antenna providing an operating range up to 700 m, N-type antenna adapter and a 19" rackmount kit.
The Cameo W-DMX™ T2 is also prepared for upgradeable CRMX compatibility, making it a versatile transceiver.
CRMX upgrade license code available for 99€ upon request. Please contact our inside sales team.
Product type
LED Moving Lights
Colour spectrum
Cold white
Refresh rate
adjustable to 25000 Hz
DMX input
XLR 3-pin male, XLR 5-pin male
DMX output
XLR 3-pin female, XLR 5-pin female
DMX mode
34-channel, 50-channel
DMX Functions
Animation Wheel, Auto Movement, Colour wheel, CTO, CTO Fine, Cyan, Cyan Fine, Device Settings, Dimmer, Dimmer Fine, Focus, Focus Fine, Framing Blade Rotation, Framing Blades, Frost, Gobo Wheel 1, Gobo Wheel 2, Iris, Magenta, Magenta Fine, PAN, PAN FINE, Prism, Rotation Fine Gobo Wheel 1, Rotation Gobo Wheel, Rotation Prism, Set Dimmer Curve, strobe, TILT, TILT FINE, Yellow, Yellow Fine, Zoom, Zoom Fine
High Speed Strobe
> 20 Hz
Standalone modes
Auto Mode, Device Settings, Static
Controls
Enter, Mode, Touch screen, Value Down, Value Up
Indicators
Graphic Display, Touch-Graphic Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Ambient temperature (operating)
-15 - 45 °C
Power connector
Neutrik powerCON IN / OUT
Housing material
ABS plastic, Metal
Cooling
Heat-pipe cooling system with temperature controlled fans
Illuminance
100,000 lx @ 3m, 39000lx @ 5m
Accessories (included)
2 x Omega Clamp, Power cord
| Standalone DMX Controller
- No computer required
- Compatible with any DMX device
- Up to 4 DMX universes (2048 channels, add-on required for U3+4)
- Up to 680 fixtures and beams
- Up to 50 fixture types
- Up to 5000 fixture properties (colour/gobo etc...)
- 8 Fixture groups
- 6 Projects
- 15000+ available fixtures (3500+ on the controller)
- DMX address
- Fixture order and group settings
- Use as DMX splitter with DMX universe mapping
- Colour FX module with 8 effect types and 16 definable colours
- Move FX module with 8 effect types
- Beam FX module with 8 effect types
- 6 Flash buttons for controlling Special FX, Strobe, Blinder, Speed, Blackout and Smoke
- Static colour palette with 10 user-defined colours per group and gradient control
- Static position palette with 5 user-defined positions per group with fade and fanning
- Gobo palette with 5 user-definable gobos per group
- 20 Nameable live edit buttons with flash trigger mode and 'park' function
- 100 Nameable presets for storing snapshots with hold and fade timings
- Preset playback cue list - all presets or per page of 20 presets
- Group and master dimming with encoder acceleration
- Group FLASH
- FULL and Blackout
- 16-Bit pan/tilt control:multi-beam LED bar control
- FX music pulse synchronisation from microphone or line-in
- FX BPM sync with Ableton Link
- OS2L or BPM Tap effect speed
- Phase, sequence, size, fade, fan and flick
- Live control of Move FX registration point
- Global FX speed and freeze control
- Map DMX IN with group dimmer and patch to output channels (add-on required)
- WLINK sync with another Wolfmix controller (add-on required)
- Fixture Builder
- Fixture calibration tool to limit the range of moving fixtures
- X-Y touch controlled positioning grid
- RGBW touch controlled colour picker
- 8-Step real-time sequencer to create beam and move FX
- Live view of DMX levels with override of default values and DMX channel tester
- Beam editor for overriding min and max values for created effects
- Calibration and RGB, white, amber, UV mixing with automatic translation of fixed colour wheel
- Automatic matching of similar gobos across different fixture types
- Time-controlled triggering of flash and preset buttons
- Fixture FLIP function for beam order reversal
- Fixture SPLIT function for splitting multi-FX bars
- Project and fixture backup with the WTOOLS app
- Offline 3D visualisation with Easy View & WTOOLS via USB (add-on required)
- Automatic restoration of the active project (no manual saving necessary)
- Import different fixture setups into the same project
Technical data:
- Housing: ABS plastic
- Powder-coated steel base plate with 100mm VESA
- Powder-coated, steel-reinforced back plate
- Screen: 4.3" colour TFT with tinted glass
- Capacitive touch
- Hardware: 220 Mhz CPU with ARM core, 8 MB RAM, 16 MB Flash
- Audio: Omnidirectional electret microphone
- 3.5 mm Jack line-in
- DMX: 2 x 3pin DMX OUT XLR connectors
- 1 x 5pin DMX OUT XLR connector
- 1 x 5pin DMX IN/OUT XLR connector with WLINK
- USB-B connector - 900ma required (USB3 rating)
- Dimensions (W x D x H): 195 x 220 x 62 mm
- Weight: 1070 g
|
- Professional 6-output DMX/RDM splitter/booster
- 6 optically and electronically isolated 3 and 5-pin XLR outputs
- Compact housing
- Original Neutrik® connectors for maximum reliability
- 3 x M10 threaded inserts for a variety of truss mounting options
- Power and DMX status indicators on front and rear panel
- Optional 2 U 19" rackmount frames available for one or two SB 6T RDM
Designed for professional applications and supporting bi-directional communication, the Cameo SB 6T RDM is a 6-output DMX/RDM splitter with two inputs and two parallel thru outputs. It sends the incoming DMX/RDM signal to six separate output ports that are electronically and optically isolated. Each output channel has its own driver to boost the DMX/RDM signal to its original level. All inputs and outputs are fitted with both 3-pin and 5-pin Neutrik® connectors for maximum flexibility and reliability. Front and rear panel LEDs indicate the power and DMX status, and three M10 female threaded inserts facilitate truss mounting. The Cameo SB 6T RDM comes with a powerCON power cord.
Product type
Other Lighting Accessories
Type
DMX splitter / booster
DMX inputs
2 (parallel)
DMX input connectors
XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs
2 (parallel)
DMX Thru Output Connectors
XLR 3-pin female , XLR 5-pin female
DMX outputs
6
DMX output connectors
XLR 3-pin male , XLR 5-pin male
Indicators
2 x power LED , 2 x Signal LED
Mains connector
Neutrik® powerCON
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Max. current
6 A
Power consumption
10 W
Fuse
F1AL / 250V
Width
185 mm
Height
77 mm
Depth
170 mm
Weight
1,3 kg
Accessories (included)
Power supply
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.