Nominal Diameter 18“, 460 mm
Overall Diameter 18.11“, 460 mm
Bolt Circle Diameter 17.32“, 440 mm
Baffle Cutout Diameter 16.61“, 422 mm
Depth 7.95“, 202 mm
Flange and Gasket Thickness 0.55“, 13.9 mm
Electrical Specifications
Minimum Impedance 6.6 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1,000 W
Maximum Power Handling**** 2,000 W
Sensitivity (1W/1m) 99 dB
Frequency Range 35 – 1600 Hz
Voice Coil Diameter 4“, 100 mm
Winding Material Copper
Former Material Glass Fiber
Winding Depth 0.9“, 23 mm
Magnetic Gap Depth 0.47“, 12 mm
Flux Density 1.3 T
THIELE & SMALL Parameters
Resonant Frequency (fs) 35 Hz
DC Resistance (Re) 5.4 Ohm
BL Product (BL) 27.2 N/A
Diaphragm Mass inc. Airload (Mms) 182 grams
Mechanical Compliance of Suspension (Cms) 0.11 mm/N
Rms 4.1 Kg/s
Electromagnetic Q (Qes) 0.29
Mechanical Q (Qms) 9.74
Total Q (Qts) 0.28
Compliance Equivalent Volume (Vas) 7.74 ft³, 219.2 dm³
Surface Area of Cone (Sd) 180.7“², 1,166 cm²
Maximum Linear Excursion (Xmax)* 9.5 mm
Xdamage** 17.5 mm
Coil Inductance (Le) 1.7 mH
Diaphragm mass (Mmd) 159.5 g
Eta Zero 3.1 %
Notes
*Xmax = [(winding depth – magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power
Βάρος
6.80 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “Faital Pro FP18HP1020A Speaker High Performance Series – 18″ 8 Ohm 1000W” Ακύρωση απάντησης
Nominal Diameter 18“, 460 mm
Overall Diameter 18.11“, 460 mm
Bolt Circle Diameter 17.32“, 440 mm
Baffle Cutout Diameter 16.61“, 422 mm
Depth 7.95“, 202 mm
Flange and Gasket Thickness 0.55“, 13.9 mm
Electrical Specifications
Minimum Impedance 6.6 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1,000 W
Maximum Power Handling**** 2,000 W
Sensitivity (1W/1m) 99 dB
Frequency Range 35 - 1600 Hz
Voice Coil Diameter 4“, 100 mm
Winding Material Copper
Former Material Glass Fiber
Winding Depth 0.9“, 23 mm
Magnetic Gap Depth 0.47“, 12 mm
Flux Density 1.3 T
THIELE & SMALL Parameters
Resonant Frequency (fs) 35 Hz
DC Resistance (Re) 5.4 Ohm
BL Product (BL) 27.2 N/A
Diaphragm Mass inc. Airload (Mms) 182 grams
Mechanical Compliance of Suspension (Cms) 0.11 mm/N
Rms 4.1 Kg/s
Electromagnetic Q (Qes) 0.29
Mechanical Q (Qms) 9.74
Total Q (Qts) 0.28
Compliance Equivalent Volume (Vas) 7.74 ft³, 219.2 dm³
Surface Area of Cone (Sd) 180.7“², 1,166 cm²
Maximum Linear Excursion (Xmax)* 9.5 mm
Xdamage** 17.5 mm
Coil Inductance (Le) 1.7 mH
Diaphragm mass (Mmd) 159.5 g
Eta Zero 3.1 %
Notes
*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power
Nominal Specifications
Nominal Diameter 18“, 460 mm
Overall Diameter 18.11“, 460 mm
Bolt Circle Diameter 17.32“, 440 mm
Baffle Cutout Diameter 16.61“, 422 mm
Depth 7.95“, 202 mm
Flange and Gasket Thickness 0.55“, 13.9 mm
Electrical Specifications
Minimum Impedance 6.6 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1,000 W
Maximum Power Handling**** 2,000 W
Sensitivity (1W/1m) 99 dB
Frequency Range 38 - 2500 Hz
Voice Coil Diameter 4“, 100 mm
Winding Material Aluminium
Former Material Glass Fiber
Winding Depth 0.9“, 23 mm
Magnetic Gap Depth 0.47“, 12 mm
Flux Density 1.3 T
THIELE & SMALL Parameters
Resonant Frequency (fs) 38 Hz
DC Resistance (Re) 5.5 Ohm
BL Product (BL) 24.5 N/A
Diaphragm Mass inc. Airload (Mms) 163 grams
Mechanical Compliance of Suspension (Cms) 0.11 mm/N
Rms 4.42 Kg/s
Electromagnetic Q (Qes) 0.35
Mechanical Q (Qms) 8.75
Total Q (Qts) 0.34
Compliance Equivalent Volume (Vas) 7.37 ft³, 208.8 dm³
Surface Area of Cone (Sd) 180.7“², 1,166 cm²
Maximum Linear Excursion (Xmax)* 9.5 mm
Xdamage** 17.5 mm
Coil Inductance (Le) 1.36 mH
Diaphragm mass (Mmd) 141 g
Eta Zero 3.14 %
Notes
*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power
18PZB100
1400 W continuous program power capacity
100 mm (4 in) copper voice coil
40 - 2000 Hz response
97 dB sensitivity
Double silicone spider with optimized compliance
Specifications
Nominal diameter460 mm (18.0 in)
Nominal impedance8 Ω
Minimum impedance6.5 Ω
Nominal power handling *700 W
Continuous power handling *1400 W
Sensitivity (1W/1m) *97.0 dB
Frequency range40 - 2000 Hz
Voice coil diameter100 mm (4.0 in)
Winding materialCopper
Former materialGlass Fibre
Winding depth21 mm (0.83 in)
Magnetic gap depth8 mm (0.31 in)
Flux density1.15 T
Design
Surround shapeDouble Roll
Cone shapeExponential
Magnet materialFerrite
SpiderDouble Silicone
Pole designStraight Pole
Woofer cone treatmentTWP Waterproof Both Sides
Recommended enclosure160.0 dm3 (5.65 ft3)
Recommended tuning39 Hz
Parameters *
Fs30 Hz
Re5.3 Ω
Qes0.25
Qms8.8
Qts0.24
Vas297.0 dm3 (10.5 ft3)
Sd1134.0 cm2 (175.8 in2)
η₀3.1 %
Xmax8.0 mm
Xvar8.0 mm
Mms170 g
Bl26.0 Txm
Le2.1 mH
EBP120 Hz
Mounting And Shipping Info
Overall diameter480 mm (18.0 in)
Bolt circle diameter440 mm (17.3 in)
Baffle cutout diameter422.0 mm (16.6 in)
Depth202 mm (7.95 in)
Flange and gasket thickness16 mm (0.62 in)
Air volume occupied by driver9.5 dm3 (0.33 ft3)
Net weight12.1 kg (26.6 lb)
Shipping units1
Shipping weight14.0 kg (30.8 lb)
Shipping box520x520x240 mm (20.5x20.5x9.4 in)
1200 W continuous program power capacity
76 mm (3 in) copper voice coil
40 - 2000 Hz response
99 dB sensitivity
Double silicone spider with optimized compliance
General
Cone driver
B&C Speakers
18PS76
Informations
8 ohm
18 inch
Sub, Low
99 dB
98.11 dB
600 W
40÷2000 Hz
Fundamental parameters
1210 cm²
149 gr
1.9 mH
5 ohm
25.8 T.m
Small signal parameters
39 Hz
0.29
6.1
0.27
207 L
Datas
±7 mm
134 Hz
6.5 ohm
144 Hz
15.1 L
4 %
4.07 %
~10.7 kg
Dimensions
3 inch
24 mm
11 mm
460 mm
422 mm
16 mm
186 mm
Shape & Materials
Cylindrical
Ferrite
Aluminium
Copper
Glass fiber
1000Wrms continuous power handling (AES Standard)
Flexirol™ technology for greater excursion control
Double suspension for exceptional linearity at the highest excursions
Saturated gap technology for lower harmonic distortion
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.