Faital Pro FP3FE22A – 3″ Speaker 20 W 8 Ohm

Nominal Specifications

• Nominal Diameter 3“, 80 mm
• Overall Diameter 3.1“, 81 mm
• Bolt Circle Diameter 3.62“, 92 mm
• Baffle Cutout Diameter 2.9“, 73.6 mm
• Depth 1.55“, 46 mm
• Flange and Gasket Thickness 0.26“, 6.5 mm

• Minimum Impedance 6.2 Ohm
• Nominal Impedance 8 Ohm
• Nominal Power Handling*** 20 W
• Maximum Power Handling**** 40 W
• Sensitivity (1W/1m) 91 dB
• Frequency Range 100 - 20,000 Hz
• Voice Coil Diameter 0.75“, 19 mm
• Winding Material Aluminium
• Former Material Kapton
• Winding Depth 0.26“, 5 mm
• Magnetic Gap Depth 0.2“, 4 mm
• Flux Density 1.5 T

• Resonant Frequency (fs) 110 Hz
• DC Resistance (Re) 6.2Ohm
• BL Product (BL) 4.5N/A
• Diaphragm Mass inc. Airload (Mms) 2.4 grams
• Mechanical Compliance of Suspension (Cms) 0.7 mm/N
• Rms 0.35 Kg/s
• Electromagnetic Q (Qes) 0.5
• Mechanical Q (Qms) 5
• Total Q (Qts) 0.45
• Compliance Equivalent Volume (Vas) 0.03 ft³, 0.95 dm³
• Surface Area of Cone (Sd) 4.5“², 29.4 cm²
• Maximum Linear Excursion (Xmax)* 1.8 mm
• Xdamage** 7.3 mm
• Coil Inductance (Le) 0.15 mH
• Diaphragm mass (Mmd) 2.3 g
• Eta Zero 0.28 %

Notes

• *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
• **Maximum excursion before permanent damage
• ***2 Hours Test According to AES 2-1984 Rev. 2003
• ****Maximum power is defined as 3dB greater than nominal power

Weighing a mere 2 lbs., the Pro 5MRN neodymium midrange / tweeter driver features a wide usable frequency range and water resistant epoxy treated paper cone for a warm, rich tone. The truncated cast frame chassis allows for tight placement in your pro audio or car audio cabinet, and pair it with a Kappalite model for the ultimate in ultra-light bass guitar performance.

SPECIFICATION

• Nominal Basket Diameter: 5“, 127 mm
• Nominal Impedance*: 8 Ω
• Power Rating**
• Watts: 65 W
• Music Program: 130 W
• Resonance: 223 Hz
• Usable Frequency Range: 325 Hz - 20 kHz
• Sensitivity***: 93.1 dB
• Magnet Weight: 4 oz.
• Gap Height: 0.236“, 6 mm
• Voice Coil Diameter: 1“, 25 mm

THIELE & SMALL PARAMETERS

• Resonant Frequency (fs): 223 Hz
• DC Resistance (Re): 5.45 Ω
• Coil Inductance (Le): 0.18m H
• Mechanical Q (Qms): 2.8
• Electromagnetic Q (Qes): 0.93
• Total Q (Qts): 0.7
• Compliance Equivalent Volume (Vas): 0.85 liters / 0.03 cu.ft.
• Peak Diaphragm Displacement Volume (Vd): 3.6 cc
• Mechanical Compliance of Suspension (Cms): 0.12 mm/N
• BL Product (BL): 5.84 T-M
• Diaphragm Mass Inc. Airload (MMs): 4 grams
• Efficiency Bandwidth Product (EBP): 239
• Maximum Linear Excursion (Xmax): 0.51 mm
• Surface Area of Cone (Sd): 71.3 cm2
• Maximum Mechanical Limit (Xlim): 5.0 mm

MOUNTING INFORMATION

• Recommended Enclosure Volume
• Sealed: 0.85-1.56 liters / 0.03-0.06 cu.ft.
• Vented: - liters / - cu.ft.
• Driver Volume Displaced: 0.494 cu.ft. / 14 liters
• Overall Diameter: 5.25“, 133.4 mm
• Baffle Hole Diameter: 4.28“, 108.7 mm
• Front Sealing Gasket: Yes
• Rear Sealing Gasket: Yes
• Mounting Holes Diameter: 0.18“, 4.6mm
• Mounting Holes B.C.D.: 4.79“, 121.7mm
• Depth: 2.16“, 54.8 mm
• Net Weight: 2 lbs, 0.91 kg
• Shipping Weight: 2.2 lbs, 1 kgs

MATERIALS OF CONSTRUCTION

• Coil Construction: Pure aluminum voice coil
• Coil Former: Kapton former
• Magnet Composition: Neodymium magnet
• Core Details: Vented and Extended core
      
• Basket Materials: Die-cast aluminum basket
• Cone Composition: Treated paper cone
• Cone Edge Composition: Cloth cone edge
• Dust Cap Composition: Treated paper dust cap

• 90 dB sensitivity 1 W 11m
• 130 W + 25 W Power handling
• 1.5" + 1" voice coil
• Single point source providing coherent wave front
• 900 conical dispersion
• Optimal for compact 2-way systems

Product type Loudspeaker Chassis

JBL Replacement Woofer for Control 23 Loudspeaker 124-03000-00

Replacement woofer for JBL's Control 23 Loudspeaker.

Voice coil:23mm (7/8“)
Nominal driver diameter: 86mm (3 3/8“)
Impedance: 8 ohms
DC Resistance: 6.5 ohms (nominal)
Polypropylene cone with rubber edge