FAITAL PRO FP8PR155A Professional Series – 8″ Speaker 200 W 8 Ohm

Nominal Specifications

• Nominal Diameter 8“, 200 mm
• Overall Diameter 8.81/8.18“, 223.7/207.9 mm
• Bolt Circle Diameter 8.27“, 210 mm
• Baffle Cutout Diameter 7.20“, 183 mm
• Depth 3.88“, 98.5 mm
• Flange and Gasket Thickness 0.43“, 10.8 mm

• Minimum Impedance 6.4 Ohm
• Nominal Impedance 8 Ohm
• Nominal Power Handling*** 200 W
• Maximum Power Handling**** 400 W
• Sensitivity (1W/1m) 97 dB
• Frequency Range 80 - 6300 Hz
• Voice Coil Diameter 2“, 52 mm
• Winding Material Aluminium
• Former Material Glass Fiber
• Winding Depth 0.39“, 9.8 mm
• Magnetic Gap Depth 0.31“, 8 mm
• Flux Density 1.3 T

• Resonant Frequency (fs) 90 Hz
• DC Resistance (Re) 5.3 Ohm
• BL Product (BL) 13 N/A
• Diaphragm Mass inc. Airload (Mms) 23 grams
• Mechanical Compliance of Suspension (Cms) 0.14 mm/N
• Rms 1.53 Kg/s
• Electromagnetic Q (Qes) 0.41
• Mechanical Q (Qms) 8.5
• Total Q (Qts) 0.39
• Compliance Equivalent Volume (Vas) 0.29 ft³, 8.26 dm³
• Surface Area of Cone (Sd) 32.09“², 207 cm²
• Maximum Linear Excursion (Xmax)* 3.57 mm
• Xdamage** 10.65 mm
• Coil Inductance (Le) 0.41 mH
• Diaphragm mass (Mmd) 21.2 g
• Eta Zero 1.44 %

Notes

• *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
• **Maximum excursion before permanent damage
• ***2 Hours Test According to AES 2-1984 Rev. 2003
• ****Maximum power is defined as 3dB greater than nominal power

50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression

Compatible with NEXO PS8

• Specifications
  • Nominal diameter200 mm (8.0 in)
  • Nominal impedance8 Ω
  • Minimum impedance6.6 Ω
  • Nominal power handling *200 W
  • Continuous power handling *400 W
  • Sensitivity (1W/1m) *94.0 dB
  • Frequency range65 - 3000 Hz
  • Voice coil diameter51 mm (2.0 in)
  • Winding materialCopper
  • Former materialGlass Fibre
  • Winding depth17 mm (0.65 in)
  • Magnetic gap depth8 mm (0.31 in)
  • Flux density1.05 T
• Design
  • Surround shapeDouble Roll
  • Cone shapeExponential
  • Magnet materialNeodymium Inside Slug
  • SpiderSingle
  • Pole designStraight Pole
  • Woofer cone treatmentTWP Waterproof Both Sides
  • Recommended enclosure14.0 dm3 (0.49 ft3)
  • Recommended tuning65 Hz
• Parameters *
  • Fs66 Hz
  • Re5.3 Ω
  • Qes0.41
  • Qms3.6
  • Qts0.37
  • Vas14.0 dm3 (0.5 ft3)
  • Sd220.0 cm2 (34.1 in2)
  • η₀1.0 %
  • Xmax7.0 mm
  • Xvar7.0 mm
  • Mms28 g
  • Bl12.4 Txm
  • Le0.5 mH
  • EBP160 Hz
• Mounting And Shipping Info
  • Overall diameter225 mm (8.8 in)
  • Bolt circle diameter210 mm (8.3 in)
  • Baffle cutout diameter187.0 mm (7.4 in)
  • Depth90 mm (3.5 in)
  • Flange and gasket thickness11 mm (0.4 in)
  • Air volume occupied by driver1.1 dm3 (0.04 ft3)
  • Net weight1.8 kg (4.0 lb)
  • Shipping units1
  • Shipping weight2.2 kg (4.8 lb)
  • Shipping box300x160x180 mm (11.8x6.3x7.1 in)

• 96 dB Sensitivity 1 W / 1 m
• 200 W Power Handling
• 2" Aluminium Sandwich Voice Coil for low Power Compression
• Double treated Cone for Water Protection
• Neodymium Magnet System
• Triple Aluminum demodulating Rings for ultra low Distortion
• Optimal for compact 2- or 3-way Systems

Nominal Specifications

    * Nominal Diameter 8“, 200 mm
    * Overall Diameter 8.81/8.18“, 223.8/203.9 mm
    * Bolt Circle Diameter 8.27“, 210 mm
    * Baffle Cutout Diameter 7.24“, 184 mm
    * Depth 4.59“, 116.7 mm
    * Flange and Gasket Thickness 0.42“, 10.7 mm


Electrical Specifications

    * Minimum Impedance 6.4 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 200 W
    * Maximum Power Handling**** 400 W
    * Sensitivity (1W/1m) 95 dB
    * Frequency Range 60 - 5000 Hz
    * Voice Coil Diameter 2“, 52 mm
    * Winding Material Aluminium
    * Former Material Glass Fiber
    * Winding Depth 0.76“, 19.3 mm
    * Magnetic Gap Depth 0.35“, 9 mm
    * Flux Density 1.15 T


THIELE & SMALL Parameters

    * Resonant Frequency (fs) 58 Hz
    * DC Resistance (Re) 5.1 Ohm
    * BL Product (BL) 11.3 N/A
    * Diaphragm Mass inc. Airload (Mms) 24 grams
    * Mechanical Compliance of Suspension (Cms) 0.31 mm/N
    * Rms 0.93 Kg/s
    * Electromagnetic Q (Qes) 0.34
    * Mechanical Q (Qms) 9.4
    * Total Q (Qts) 0.35
    * Compliance Equivalent Volume (Vas) 0.62 ft³, 17.6 dm³
    * Surface Area of Cone (Sd) 30.8“², 199 cm²
    * Maximum Linear Excursion (Xmax)* 8.15 mm
    * Xdamage** 13.5 mm
    * Coil Inductance (Le) 0.55 mH
    * Diaphragm mass (Mmd) 22 g
    * Eta Zero 1.02 %

Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power

ALPHA- Serie 100W- 200W

Recommended for professional audio and bass guitar applications as a mid-range. Sealed basket makes this
woofer independent of enclosure design.

• Nominal Basket Diameter 8“, 203.2 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 125 W / Music Program 250 W
• Resonance 514 Hz
• Usable Frequency Range 400 Hz - 4.8 kHz
• Sensitivity 100.9
• Magnet Weight 20 oz.
• Gap Height 0.25“, 6.35 mm
• Voice Coil Diameter 1.5“, 38.1 mm

• Resonant Frequency (fs) 514 Hz
• DC Resistance (Re) 7.32
• Coil Inductance (Le) 0.34 mH
• Mechanical Q (Qms) 4.48
• Electromagnetic Q (Qes) 2.08
• Total Q (Qts) 1.42
• Compliance Equivalent Volume (Vas) 0.8 liters / 0.03 cu.ft.
• Peak Diaphragm Displacement Volume (Vd) 0cc
• Mechanical Compliance of Suspension (Cms) 0.01 mm/N
• BL Product (BL) 8.9 T-M
• Diaphragm Mass inc. Airload (Mms) 6.9 grams
• Efficiency Bandwidth Product(EBP) 247
• Maximum Linear Excursion (Xmax) 1.6 mm
• Surface Area of Cone (Sd) 205.9 cm²
• Maximum Mechanical Limit (Xlim) 3.0 mm

• Recommended Enclosure Volume
  Sealed N/A
  Vented N/A
• Overall Diameter 8.22“, 208.8 mm
• Baffle Hole Diameter 7.19“, 182.5 mm
• Front Sealing Gasket fitted as standard
• Rear Sealing Gasket fitted as standard
• Mounting Holes Diameter 0.22“, 5.5 mm
• Mounting Holes B.C.D. 7.75“, 196.9 mm
• Depth 3.25“, 83 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Pressed steel basket with closed back
• Paper Cone
• Paper cone edge
• Solid composition paper dust cap

Nom. Diameter     200 mm (8 in)
Overall Diameter     223.75/207.9 mm (8.81/8.19 in)
Bolt Circle Diameter     210 mm (8.27 in)
Baffle Cutout Diameter     183 mm (7.20 in)
Depth     110.7 mm (4.36 in)
Flange and Gasket Thickness     10.7 mm (0.42 in)
Net Weight     2.7 Kg (5.95 lb)
Shipping Box
(Single Carton Box)     246x246x150 mm (9.69x9.69x5.91 in)
Shipping Weight     3.4 Kg (7.50 lb)


Nom. Impedance     8 Ohm     8 Ohm
Minimum Impedance     6.6 Ohm     6.9 Ohm
Nom. Power Handling ***     250 W     30 W
Max Power Handling ****     500 W     60 W
Sensitivity (1W/1m) *****     95 dB     107 dB
Frequency Range     75÷4000 Hz     1500÷20000 Hz
Voice Coil Diameter     65 mm (2.50 in)     37 mm (1.46 in)
Winding Material     Al     Al
Former Material     Glass Fiber     Kapton
Winding Depth     12.5 mm (0.49 in)     2.1 mm (0.08 in)
Magnetic Gap Depth     8 mm (0.31 in)     2.6 mm (0.10 in)
Flux Density     1.2 T     1.85 T
Min. Cross. Freq. ******     -     1700 Hz
Dispersion Angle     -     90°
Diaphragm Material     -     Ketone Polymer
Diaphragm Shape     -     Annular


Fs     76 Hz
Re [LF]     5.5 Ohm
Re [HF]     5.5 Ohm
Qes     0.31
Qms     10.5
Qts     0.3
Vas     12.6 dm^3 (0.44 ft^3)
Sd     211 cm^2 (32.71 in^2)
Xmax *     4.92 mm
Xdamage **     10.2 mm
Mms     22 g
Bl     13.7 N/A
Le     0.51 mH
Mmd     20.3 g
Cms     0.2 mm/N
Rms     1 Kg/s
Eta Zero     1.74 %
EBP     245 Hz