Faital Pro FPHF100A HF 100 Compression Driver 1” 8 Ohms 30W

19%
Όλα τα προϊόντα με Faital Pro

€61.49 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: 4049521111068
Υπολογισμός δόσεων €
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 4-10 Ημ. Διαθέσιμο 4-10 Ημ. Κωδικός προϊόντος: FPHF100A Κατηγορία:
Faital Pro HF 100 A 1″ Compression Driver 30 W 8 Ohms Product type High-frequency Drivers Nominal Diameter 1 ” Nominal Diameter 25.4 mm Voice Coil 0.98 ” Voice Coil 25 mm Overall diameter 108 mm Depth 55 mm Nominal Impedance 8 Ohm(s) Nominal Load Capacity 30 W maximum rated load 60 W Sensitivity (horn […]

 

Διαβάστε περισσότερα

Faital Pro HF 100 A
1″ Compression Driver 30 W 8 Ohms

Product type
High-frequency Drivers

Nominal Diameter
1 ”

Nominal Diameter
25.4 mm

Voice Coil
0.98 ”

Voice Coil
25 mm

Overall diameter
108 mm

Depth
55 mm

Nominal Impedance
8 Ohm(s)

Nominal Load Capacity
30 W

maximum rated load
60 W

Sensitivity (horn 1 W / 1 m)
108

Frequency response
1500 – 20000 Hz

recommended crossover frequency
2000 Hz

Voice Coil Carrier
Kapton

Diaphragm material
Ketone Polymer

Magnet
Ferrite

Weight
0,83 kg

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “Faital Pro FPHF100A HF 100 Compression Driver 1” 8 Ohms 30W”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

Faital Pro FPHF100A HF 100 Compression Driver 1'' 8 Ohms 30W removeB & C Speakers DE-85 8 OMH Driver 140W RMS, 108dB, 500-18.000 Hz removeB & C Speakers DE-500 Driver 1inch 80W removeB & C Speakers DE-85TN Driver 2inch 110W removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M remove
NameFaital Pro FPHF100A HF 100 Compression Driver 1'' 8 Ohms 30W removeB & C Speakers DE-85 8 OMH Driver 140W RMS, 108dB, 500-18.000 Hz removeB & C Speakers DE-500 Driver 1inch 80W removeB & C Speakers DE-85TN Driver 2inch 110W removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers WG-400 8Ω, 50W Nominal / 110W continuous,108,5dB 1W/1M remove
Image
SKUFPHF100ADE-85DE-500DE-85TNDE-45WG-400
Rating
Price €61.49 με ΦΠΑ 24% €206.66 με ΦΠΑ 24% €191.99 με ΦΠΑ 24% €268.00 με ΦΠΑ 24% €136.15 με ΦΠΑ 24% €243.99 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content Faital Pro HF 100 A
1" Compression Driver 30 W 8 Ohms Product type High-frequency Drivers
Nominal Diameter 1 "
Nominal Diameter 25.4 mm
Voice Coil 0.98 "
Voice Coil 25 mm
Overall diameter 108 mm
Depth 55 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 30 W
maximum rated load 60 W
Sensitivity (horn 1 W / 1 m) 108
Frequency response 1500 - 20000 Hz
recommended crossover frequency 2000 Hz
Voice Coil Carrier Kapton
Diaphragm material Ketone Polymer
Magnet Ferrite
Weight 0,83 kg

Driver 140WRMS, 108dB, 500-18.000 Hz

2" high frequency compression driver. The particular mylar/titanium
diaphragm using a 3" edgewound flat aluminium wire voice coil and a
optimized high energy ceramic magnet assembly using a copper shorting
ring assembly produce smooth response and excellent sonic properties .

Specifications1
Throat Diameter 50 mm (2 in)
Nominal Impedance 8 Ω
Minimum Impedance 8 Ω
Power Handling
(1000 –20000 Hz)
Nominal2 80 W
Continuous Program3 160 W
Sensitivity (1W/1m)4 108 dB
Frequency Range 0.5 – 18 kHz
Recommended Crossover5 1000 Hz
Voice Coil Diameter 75 mm (3 in)
Winding Material Aluminium
Inductance 0.14 mH
Diaphragm Material Titanium
Flux Density 1.8 T
Also available in 16 Ω, data upon request

Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter 170 mm (6.7 in)
Depth 67 mm (2.6 in)
Net Weight (1 unit) 4.5 kg (9.9 lb)
Shipping Weight (2 units) 9.6 kg (21.2 lb)
Shipping Box (2 units) 210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 75 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response

General
Product type Compression driver
Brand B&C Speakers
Reference DE500
Product code DRV5008

Informations
Nominal impedance 8 ohm
Dimensional category 4 inch
Manufacturer sensitivity 107 dB
Nominal power handling 80 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1500 Hz
Exit dimension 1.0 inch

Fundamental parameters
Le 0.11 mH

Datas
Flux density 1.9 T
Zmin 7.8 ohm

Dimensions
Voice coil diameter 1.7 inch
Outside diameter 102 mm
Depth 51 mm
Driver mounting system 2 points on diameter 76 mm
Driver mounting system N°2 3 points on diameter 57 mm

Shape & Materials
Front chape Cylindrical
Magnet type Neodymium
Winding material Aluminium
Diaphragm material Titanium

Driver 2“, 110W, 107dB, 0.5-18kHz, διάφραγμα
τιτανίου, 4.5kg

220 W continuous program power capacity
2” horn throat diameter
75 mm (3 in) aluminium voice coil
Titanium diaphragm
500 – 18000 Hz response
107 dB sensitivity
Shorting copper cap for extended HF response

 

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Χωνί αλουμινίου με driver 140o, στον οριζόντιο
άξονα, 8Ω, 50W Nominal / 110W continuous,
108,5dB 1W/1M, απόκριση συχνότητας 1200 -
18000Ηz, 1,3kg.

Line Array optimized Waveguide
140° max horizontal coverage
100 W continuous program power capacity
44 mm (1.7 in) aluminium voice coilm (3 in) aluminium voice coil
Polyimide diaphragm
1200 – 18000 Hz response
108.5 dB sensitivity
Compact Neodymium magnet assembly

 

Weight1.00 kg4.50 kg5.00 kg4.50 kg2.00 kg1.30 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 4.50 kg
Βάρος 5.00 kg
Βάρος 4.50 kg
Βάρος 2.00 kg
Βάρος 1.30 kg

Σχετικά προϊόντα