Content |
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 6.5 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 150 W
* Maximum Power Handling**** 300 W
* Sensitivity (1W/1m) 94 dB
* Frequency Range 80 - 6300 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.53“, 13.5 mm
* Magnetic Gap Depth 0.31“, 8 mm
* Flux Density 1 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 76 Hz
* DC Resistance (Re) 5.8 Ohm
* BL Product (BL) 9.86 N/A
* Diaphragm Mass inc. Airload (Mms) 20.9 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2.11 Kg/s
* Electromagnetic Q (Qes) 0.59
* Mechanical Q (Qms) 4.72
* Total Q (Qts) 0.53
* Compliance Equivalent Volume (Vas) 0.42 ft³, 11.9 dm³
* Surface Area of Cone (Sd) 31“², 200 cm²
* Maximum Linear Excursion (Xmax)* 5.42 mm
* Xdamage** 12 mm
* Coil Inductance (Le) 0.55 mH
* Diaphragm mass (Mmd) 19.4 g
* Eta Zero 0.85 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
- 96 dB Sensitivity 1 W / 1 m
- 200 W Power Handling
- 2" Aluminium Sandwich Voice Coil
- Double treated Cone for Water Protection
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2-way Systems
|
50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression
Compatible with NEXO PS8
- Specifications
- Nominal diameter200 mm (8.0 in)
- Nominal impedance8 Ω
- Minimum impedance6.6 Ω
- Nominal power handling *200 W
- Continuous power handling *400 W
- Sensitivity (1W/1m) *94.0 dB
- Frequency range65 - 3000 Hz
- Voice coil diameter51 mm (2.0 in)
- Winding materialCopper
- Former materialGlass Fibre
- Winding depth17 mm (0.65 in)
- Magnetic gap depth8 mm (0.31 in)
- Flux density1.05 T
- Design
- Surround shapeDouble Roll
- Cone shapeExponential
- Magnet materialNeodymium Inside Slug
- SpiderSingle
- Pole designStraight Pole
- Woofer cone treatmentTWP Waterproof Both Sides
- Recommended enclosure14.0 dm3 (0.49 ft3)
- Recommended tuning65 Hz
- Parameters *
- Fs66 Hz
- Re5.3 Ω
- Qes0.41
- Qms3.6
- Qts0.37
- Vas14.0 dm3 (0.5 ft3)
- Sd220.0 cm2 (34.1 in2)
- η₀1.0 %
- Xmax7.0 mm
- Xvar7.0 mm
- Mms28 g
- Bl12.4 Txm
- Le0.5 mH
- EBP160 Hz
- Mounting And Shipping Info
- Overall diameter225 mm (8.8 in)
- Bolt circle diameter210 mm (8.3 in)
- Baffle cutout diameter187.0 mm (7.4 in)
- Depth90 mm (3.5 in)
- Flange and gasket thickness11 mm (0.4 in)
- Air volume occupied by driver1.1 dm3 (0.04 ft3)
- Net weight1.8 kg (4.0 lb)
- Shipping units1
- Shipping weight2.2 kg (4.8 lb)
- Shipping box300x160x180 mm (11.8x6.3x7.1 in)
| |
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/203.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 6.4 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 200 W
* Maximum Power Handling**** 400 W
* Sensitivity (1W/1m) 95 dB
* Frequency Range 60 - 5000 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.76“, 19.3 mm
* Magnetic Gap Depth 0.35“, 9 mm
* Flux Density 1.15 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 58 Hz
* DC Resistance (Re) 5.1 Ohm
* BL Product (BL) 11.3 N/A
* Diaphragm Mass inc. Airload (Mms) 24 grams
* Mechanical Compliance of Suspension (Cms) 0.31 mm/N
* Rms 0.93 Kg/s
* Electromagnetic Q (Qes) 0.34
* Mechanical Q (Qms) 9.4
* Total Q (Qts) 0.35
* Compliance Equivalent Volume (Vas) 0.62 ft³, 17.6 dm³
* Surface Area of Cone (Sd) 30.8“², 199 cm²
* Maximum Linear Excursion (Xmax)* 8.15 mm
* Xdamage** 13.5 mm
* Coil Inductance (Le) 0.55 mH
* Diaphragm mass (Mmd) 22 g
* Eta Zero 1.02 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 5.9 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 200 W
* Maximum Power Handling**** 400 W
* Sensitivity (1W/1m) 92 dB
* Frequency Range 80 - 5000 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.76“, 19.3 mm
* Magnetic Gap Depth 0.27“, 7 mm
* Flux Density 1.05 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 74 Hz
* DC Resistance (Re) 5.1 Ohm
* BL Product (BL) 8.9 N/A
* Diaphragm Mass inc. Airload (Mms) 23 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2 Kg/s
* Electromagnetic Q (Qes) 0.69
* Mechanical Q (Qms) 5.30
* Total Q (Qts) 0.61
* Compliance Equivalent Volume (Vas) 0.32 ft³, 9 dm³
* Surface Area of Cone (Sd) 27.5“², 177.3 cm²
* Maximum Linear Excursion (Xmax)* 8.48 mm
* Xdamage** 12.9 mm
* Coil Inductance (Le) 0.6 mH
* Diaphragm mass (Mmd) 21.6 g
* Eta Zero 0.5 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.