| Content | Το Focal Shape είναι η νέα σειρά monitor της Focal που προσφέρει μια σχεδίαση με πολλές καινοτομίες και νέες ιδέες.
Η Focal πρωτοπορεί για ακόμα μια φορά στα προσιτά nearfield monitors συνδιάζοντας μια καταπληκτική σχεδίαση με τεχνολογίες που παρουσιάστηκαν πρώτα στις κλασσικές και πολύ δημοφολείς πλέον σειρές SM.
To Shape 65 είναι το μοντέλο με γούφερ 6.5" στην σειρά Shape το οποίο προσφέρει υψηλής ποιότητας ήχο αναφοράς στο studio, σε σουίτες μοντάζ, σε συνθέτες και παραγωγούς και σε κάθε χρήση που ο χώρος δεν είναι μεγάλος αλλά οι ανάγκες για monitor ήχο αναφοράς είναι μεγάλες !
Συνδιάζοντας τεχνολογίες αιχμής με flax-sandwich για το woofer, ανεστραμένο M-shaped tweeter, καινοτόμα σχεδίαση και εξαιρετικά ηλεκτρονικά, όλα αυτά συνδιάζονται για την δημιουργία ενός ηχείου με εξαιρετικά ομαλή απόκριση συχνοτήτων και παντελή έλλειψη παραμόρφωσης.Ταυτόχρονα προσφέρει καθαρή μεσαία περιοχή και μεγάλη στερεοφωνική εικόνα.
Επίσης με την καινοτόμα σχεδίαση με διπλό radiator σε κλειστό κουτί μπορεί εύκολα να τοποθετηθεί κοντά σε τοίχους χωρίς να χρωματίσουν τα μπάσσα διατηρώντας μάλιστα πρωτόγνωρη ταχύτητα, έκταση, έλεγχο και ακρίβεια.
Με καινοτόμα σχεδίαση και τεχνολογίες που πρώτη φορά παρουσιάζονται σε monitor ηχεία αυτής της κατηγορίας, δεν είναι τυχαίο που η σειρά Shape της Focal γνωρίζει αμέσως τεράστια επιτυχία διεθνώς.
- Designed without a rear bass port - allows placing directly in front of a wall
- Power: 105 W Class AB
- Woofer: 6.5" Flax Cone
- Tweeter: 1" Aluminium-Magnesium
- 6.5" Double-passive membrane
- Frequency range (+/- 3 dB): 40 - 35000 Hz
- Max SPL peak @ 1 m (musical signal): 109 dB
- Input impedance: 10 kOhm
- Settings: High pass filter, bass, middle, high
- Power switch
- Automatic standby function
- Connections: XLR and RCA
- Thread connector for ceiling and wall brackets (mounting accessories not included)
- Dimensions (W x D x H): 218 x 285 x 355 mm
- Weight: 8.5 kg
- Housing: 12 mm MDF - Vinyl, walnut, black
|
Ενεργό monitor (2 way active), 8.75 ίντσες υψηλής ευκρίνιας , χαμηλής παραμόρφωσης LF αισθητήρες, 1 ίντσα θόλος τιτανίου, ferrofluid cooled tweeter, twin FR series ενισχυτές (150watt LF/100watt HF), passive radiator , articulate bass extension μέχρι 35Hz, balanced XLR/TRS και unbalanced RCA εισόδους, THX pm3™ για surround sound εφαρμογές.
High resolution Active studio reference monitorUltra-linear frequency response for accurate mix translation8.75-inch high-precision, low-distortion LF transducer1-inch titanium dome, ferrofluid cooled tweeterOptimized Waveguide for wide, even sweet zoneTwin FR Series amps — 150W for LF / 100W for HFCast aluminum Zero Edge Baffle™ minimizes diffractionFull internal damping eliminates midrange artifactsPassive radiator provides tight, articulate bass extension down to 35HzAcoustic Space, LF roll-off, and HF controlsBalanced XLR, TRS, and unbalanced RCA inputsOmniMount™ ready for easy wall/ceiling placementTHX pm3™ certified for surround sound applicationsPerfect for High-Definition audio, cinema and gaming systemsΔιαστάσεις (HxWxD) 425x 273x290mm.Bάρος 15,7kg. |
Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors
OVERVIEW
The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.
The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.
Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.
Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.
FEATURES
- 2-Way active studio monitor pair
- Ideally suited for computer studios, multimedia workstations and keyboards
- Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
- Powerful woofers and high-resolution tweeters
- High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
- Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
- Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
- Individual volume controls for both Line inputs plus Bass and Treble EQ controls
- 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel
SPECIFICATIONS
MS20 Digital Monitor Speakers (Pair)
- Loudspeakers
Tweeter: ˜ 65 mm (2 1/2“), 8 ?
Woofer: ˜ 92 mm (3 5/8“), 4 ?
Audio Inputs
Line 1: 1/8" TRS stereo, impedance 20 k?
Line 2: 2 RCA, impedance 20 k?
Digital Inputs
Optical: TOSLINK
Coaxial: RCA
Converter: 24-bit
Sample rate:
System Specs
Output power: 2 x 20W
Frequency response: 50Hz to 25kHz
Power Supply
Mains Voltages: USA/Canada 120 V, 60 Hz
Power Consumption: 80W
| ΤΙΜΗ ΤΕΜΑΧΙΟΥ
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
| Subwoofer |
|
| Number |
1 / 1 |
| Basket Ø |
7" (175 mm) / 7" (175 mm) |
| Voice coil Ø |
1.5" (38 mm) / 1.5" (38 mm) |
| Cone material |
Carbon / rohacell / glass / Carbon / rohacell / glass |
| Tweeter |
|
| Number |
1 |
| Type |
X-ART |
| Diaphragm area |
4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø |
2" (56 mm) |
| Velocity transform ratio |
4:1 |
| Diaphragm weight |
0.17 g |
| Built-in Amplifiers |
|
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Tweeter |
1 |
| Type |
A/B |
| Amp. power RMS / music |
50 W / 75 W |
| Control panel |
|
| Input Sensitivity |
-∞ to +14 dB |
| High Shelf EQ > 5 kHz |
±6 dB |
| Low Shelf EQ |
±6 dB |
| Tweeter gain |
±4 dB |
| Input connectors |
|
| Analog |
XLR / RCA |
| Location |
Rear |
| General data |
|
| Panel |
Front |
| Frequency response |
38 Hz - 50 kHz |
| THD 90dB/1m > 100 Hz |
≤0.5 % |
| Long term output |
≥114 dB |
| Max. peak |
≥122 dB |
| Crossover frequencies |
400 / 3000 Hz |
| Input impedance |
30 KOhm |
| Weight |
28.2 lb (12,8 kg) |
| Magnetically shielded |
Optional |
| Height x Width x Depth |
9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) |
| Warranty |
5 Years |
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
The original A5
The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009).
The new A5X
The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.
Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.
A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.
Stereolink
A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.
This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.
Controls and Connectors
The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.
Review: "The A5X: a superb impression."
“A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10)
| Mid-Woofer |
| | Number | 1 | | Basket Ø | 5.5" (145 mm) | | Voice coil Ø | 1.5" (32 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 50 W / 75 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 50 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.6 % | | Long term output | ≥102 dB | | Max. peak | ≥110 dB | | Crossover frequencies | 2500 Hz | | Input impedance | 30 KOhm | | Weight | 14.6 lb (6,6 kg) | | Magnetically shielded | No | | Height x Width x Depth | 11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm) | | Warranty | 5 Years |
| Delivery contents | |
Cinch-cable, Power cord, Manual
|
| Χαρακτηριστικά της σειράς D3
> Σχεδίαση με δύο ενισχυτές για δυναμικό και ακριβή ήχο,
> Ειδικά σχεδιασμένος οδηγός στα tweeter, για καλύτερη στερεοφωνική εικόνα,
> Σύστημα 'Acoustic Space Control', για προσαρμογή των χαμηλών συχνοτήτων στον κάθε χώρο,
> Βελτιωμένο σύστημα Bass Reflex, για εκτεταμένη απόκριση χαμηλών συχνοτήτων,
> Είσοδοι XLR balanced και 1/4” balanced/unbalanced, για εύκολη σύνδεση με audio interfaces,mixers, synthesizers, DJ gear
>Έλεγχος στάθμης ακρόασης,
>Φωτεινή ένδειξη LED στο εμπρός μέρος, που γίνεται πιό έντονη όταν το ηχείο τοποθετείται στη σωστή γωνία ακρόασης.
Χαρακτηριστικά BX8
> Συνολική ισχύς 150 watts (80 watts για woofer, 70 watts για tweeter),
> Woofer 8 ιντσών από Kevlar,
> Tweeter θόλου 1.25 ιντσών (από φυσικό μετάξι) με εξαιρετική λεπτομέρεια στον ήχο,
> Απόκριση συχνότητας: 37Hz - 22kHz.
Η τιμή αφορά σε τεμάχιο |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.