Rack mount stereo powered monitor speaker system New AES/EBU digital input lndependent MUTE function Sophisticated control panel section Ideal where space is at a premium RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring […]
RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications.
Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4″ plug).
AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
Independent MUTE function by holding down CH SEL key for a while.
Auto Mute when powering on*.
D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
Multi-voltage power supply.
Speaker Section
Unit: 110 x 40mm cone type, magnetically shielded, x 2
Impedance: 8 ohms
Output SPL: 84 dB/W (1m)
Frequency response: 200Hz to 20kHz
Amplifier Section
Rated output power: 10W or more (8 ohms, 1kHz)
Residual noise: -60 dBV or less (DIN AUDIO)
Distortion: 0.5% or less (10W / 4 ohms, 1kHz)
Digital input
Connector: XLR-3-31 type
Digital input Format: IEC60958 (AES/EBU)
Digital inputSampling frequency: 44.1kHz to 96 kHz
Analog input
Connector: XLR / 1/4″ combi-jack
Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
Analog input Input impedance 10k ohms or more
Phones
Connector: 1/4″ stereo jack
Applicable load imp. 8 ohms or more
Rated output power 20mW + 20mW (32 ohms, 1kHz)
General
External dimensions: 430(W) x 44(H) x 282(D) mm
Weight: Approx. 3.5kg
Power requirement: 100 – 240V~, 50/60Hz
Power consumption: 10W
Βάρος
3.50 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “FOSTEX RM-2 Ενισχυτής D-class (10W x 2)” Ακύρωση απάντησης
RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications.
Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
Independent MUTE function by holding down CH SEL key for a while.
Auto Mute when powering on*.
D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
Multi-voltage power supply.
Speaker Section
Unit: 110 x 40mm cone type, magnetically shielded, x 2
Impedance: 8 ohms
Output SPL: 84 dB/W (1m)
Frequency response: 200Hz to 20kHz
Amplifier Section
Rated output power: 10W or more (8 ohms, 1kHz)
Residual noise: -60 dBV or less (DIN AUDIO)
Distortion: 0.5% or less (10W / 4 ohms, 1kHz)
Digital input
Connector: XLR-3-31 type
Digital input Format: IEC60958 (AES/EBU)
Digital inputSampling frequency: 44.1kHz to 96 kHz
Analog input
Connector: XLR / 1/4" combi-jack
Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
Analog input Input impedance 10k ohms or more
Phones
Connector: 1/4" stereo jack
Applicable load imp. 8 ohms or more
Rated output power 20mW + 20mW (32 ohms, 1kHz)
General
External dimensions: 430(W) x 44(H) x 282(D) mm
Weight: Approx. 3.5kg
Power requirement: 100 - 240V~, 50/60Hz
Power consumption: 10W
Τελικός ενισχυτής 2Χ340W/4Ω, 2Χ180W/8Ω, 2Χ600W/2Ω, bridge 1200W/4Ω, απόκριση 10-83kHz, κύκλωμα προστασίας υπερθέρμανσης, βραχυκυκλώματος, DC voltage. Διαθέτει κύκλωμα clip-limiter, είσοδοι balanced XLR, έξοδοι speakon & binding post, high pass filter 30Ηz & 50Ηz. Ανεμιστήρας ψύξης. Ύψος 2U. Κατάλληλος για εγκαταστάσεις & P.A. 10,3Kg.
L1400 450W-450W 4ohm (280W-280W8ohm)
COMPACT MODERN DESIGN
Compact size (2U-Rack Height) with up to 1200W per channel@2ohms
these amps save valuable rack space without compromising power output.
HIGH CURRENT TOROIDAL TRANSFORMER
A high-current toroidal transformer saves rack space
and minimizes hum and noise.
EXCELLENT SOUND QUALITY
The low T.H.D.(0.05%) and high damping factor (400 or higher)
gives excellent sound quality.
2 STAGE POWER SUPPLY
The high-power units (L1800 and L2400) have a 2-Stage Class-H design
that maximizes their performance.
EQUIPPED WITH 30Hz or 50Hz HPF
All amplifiers are equipped with high-pass filters on each channel to
help maintain sound quality, yet help protect the loudspeakers.
EXTENSIVE PROTECTION CIRCUITS
Extensive protection circuits monitor over voltage/current conditions, overheating,
output shorts, and DC voltage to improve performance and reliability.
CLIP-LIMITER CIRCUITS
Clip-limiters on each channel are provided to help prevent
distortion due to excessive signal levels.
L.E.D FUNCTION DISPLAYS
Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged)
LEDs on the front panel indicate the status of the unit in operation.
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.