FURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER

1,331.50 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 4-10 Ημ. Διαθέσιμο 4-10 Ημ. Κωδικός προϊόντος: P1400ARE Κατηγορία:
The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages – all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V […]

 

Διαβάστε περισσότερα

The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages – all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.

Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furmanʼs Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts

SPECIFICATIONS:

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts
Βάρος 7.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “FURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

FURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER removeWORK D-9 1U RACK ΔΙΠΛΟ ΦΩΤΙΣΤΙΚΟ με DIMMER removeAdam Hall 19" 874716 19" 16-Outlet Power Strip removeAdam Hall 87471 C20 Διανομέας 19" Rack 8-εξόδους Σούκο C20 Socket Εισόδου removeFURMAN P2300IT-E SYMMETRICALLY BALANCED POWER CONDITIONER removeAdam Hall 87471 X7-way Out Power Strip 1U Switch Protection Cap remove
NameFURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER removeWORK D-9 1U RACK ΔΙΠΛΟ ΦΩΤΙΣΤΙΚΟ με DIMMER removeAdam Hall 19" 874716 19" 16-Outlet Power Strip removeAdam Hall 87471 C20 Διανομέας 19" Rack 8-εξόδους Σούκο C20 Socket Εισόδου removeFURMAN P2300IT-E SYMMETRICALLY BALANCED POWER CONDITIONER removeAdam Hall 87471 X7-way Out Power Strip 1U Switch Protection Cap remove
Image87471C20_power distributor c20 cold socket 8way out87471x7_power distributor 7way out switch quard-2
SKUP1400ARED-987471687471C20P2300ITE87471X7
Rating
Price1,331.50 με ΦΠΑ 24% 84.00 με ΦΠΑ 24% 102.85 με ΦΠΑ 24% 59.52 με ΦΠΑ 24%3,222.38 με ΦΠΑ 24% 43.39 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.

Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furmanʼs Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts

SPECIFICATIONS:

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts

1U Rack διπλό φωτιστικό με dimmer και 10 εξόδους 230V για τροφοδοσία effects.

  • Rated @ 250 V, 16 A
  • 16 x 45° angled outlets
  • 8 front and 8 rear outlets with individual on/off switches
  • Overload protection

The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.

Product type 19" rack mains socket strips
Type 19" / 1 U
Number of outlets (Earthing contact / IEC 7/4) 2 x 8
Power input cables
Cable length 2 m
Cable connector angled , Earthing contact (CEE 7/7)
Cross section 1.5 mm²
Operating voltage 250 V
Max. current 16 A
Cabinet material Aluminium
Colour Black
Width 485 mm
Height 44 mm
Depth 126 mm
Special feature 8 x Sockets back side , 8 x Sockets front side , Overload protection for front and rear side , Separate front and rear switches
Weight 1,7 kg

Adam Hall Cables 87471 C20

19" Power Strip 1U 8-way with C20 cold device socket

  • Power distributor with IEC C20 socket and detachable supply cable included
  • Max. current 16 A
  • 8 45° rotated Schuko sockets
  • Illuminated mains switch
  • 250 V operating voltage

Description

Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.

Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
8
Power input
cables
Cable length
2 m
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
3 x 1.5 mm² mm²
cable type
H05VV-F
Operating voltage
250 V
Max. current
16 A A
Cabinet material
Aluminium
Color
Black
Width
485 mm
Height
44 mm
Depth
44 mm
Other features
19" rack mains socket strips, Illuminated on / off switch
Weight
0,73 kg

Designed for the most critical, ultra-low noise installations, the P-2300 IT E supplies up to 10 amps of balanced AC power ideal for recording studios, broadcast stations, video production facilities, or any environment requiring a pristine, studio-quality signal-to-noise ratio.

The P-2300 IT E features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Extreme Voltage Shutdown (EVS), and Linear Filtering Technology (LiFT) are combined to ensure what our customers have grown to expect from Furman — uncompromised protection and purification.

Symmetrically Balanced Power
Furmanʼs Symmetrically Balanced Power provides a virtually invisible noise floor by reworking incoming AC into a balanced power output. Similar to a balanced audio signal, balanced power splits a single voltage path into two separate voltage paths which are in opposite polarity, cancelling out noise and distortion on the incoming line. This noise reduction is extraordinarily efficient and linear across a huge frequency range, unveiling harmonics, overtones and low-level signals commonly masked by AC line noise.

Unmatched Protection
Furmanʼs SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained overvoltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.

Innovative Convenience and Monitoring Features
The P-2300 IT Eʼs front panel LED window displays incoming voltage or output current, with ”Protection OK”, ”Extreme Voltage” and color-coded ”Voltage Range” indicators for comprehensive power monitoring. A front panel USB outlet charges most personal media devices and cell phones right at your equipment rack. Universal IEC C-13 receptacles (12 rear panel, 2 front panel) and a removable power cord ensure compatibility with regional power requirements.

SPECIFICATIONS:

Maximum Current:10 amps
Line Cord:Detachable cord, 1mm² x 3, 2.5M long, Schuko plug to IEC C13
Operating Voltage:180 to 244 VAC, 50 Hz
Over-Voltage Shutdown:275 VAC Nominal
Spike Protection Mode:Line to neutral, zero ground leakage
Spike Clamping Voltage:375 VAC peak @ 3,000 Amps
Response Time:1 nanosecond
Maximum Surge Current:6,500 Amps
Noise Attenuation:10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions:483mm W x 356mm D x 133mm H (19” W x 14” D x 5.25” H)
Weight:43 kg. (95lbs.)
Power Consumption:18 watts (for display and control circuits)
Receptacles:Fourteen IEC C-13 (two front panel, twelve rear panel)

 

 

Adam Hall Cables 87471 X7

19" Power Strip 1U 7-way with switch & protection cap

  • Mountable Power Strip from our 19" PDU range
  • With recessed, illuminated switch and protective cap
  • 7 Schuko sockets rotated 45°
  • With 8-way adjustable mounting brackets
  • 1.4 m PVC cable with angled Schuko plug

The practical solution for your 19" rack. Our 87471 X7 with 8-way adjustable stable mounting ears and 7 Schuko sockets comes with a protective cap for the switch. This prevents the power distributor from being switched off accidentally. The cable routing on the side is supplied with a PVC cable (H05VV-F) with 3 x 1.5 mm² inner conductor and an angled Schuko plug.

Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
7, Rotated 45°
Power input
cables
Cable length
2 m
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium, Plastic
Color
Black
Width
482.6 mm
Height
45 mm
Depth
44.6 mm
Other features
Illuminated on / off switch with protective cap, Mounting brackets can be inserted in 8 positions
Weight
0,9 kg
Weight7.00 kg3.00 kg2.00 kg1 kg43.00 kg1 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 7.00 kg
Βάρος 3.00 kg
Βάρος 2.00 kg
Βάρος 1 kg
Βάρος 43.00 kg
Βάρος 1 kg