FURMAN PS-PRO E II POWER CONDITIONER/SEQUENCER

564.20 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 4-10 Ημ. Διαθέσιμο 4-10 Ημ. Κωδικός προϊόντος: PSPROEII Κατηγορία:
The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-PRO E II power conditioner / sequencer, featuring Furman’s revolutionary SMP technology. Furman’s Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) coupled with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOVs. Together, these […]

 

Διαβάστε περισσότερα

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-PRO E II power conditioner / sequencer, featuring Furman’s revolutionary SMP technology. Furman’s Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) coupled with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOVs. Together, these technologies comprise what is, without question, the world’s most advanced and comprehensive transient voltage surge suppressor.

SMP (Series Multi-Stage Protection Plus)
Furmanʼs SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furmanʼs SMP, damaging transient voltages are safely absorbed, clamped and dissipated – no sacrificed parts, no service calls, no down time.

Unique to Furmanʼs SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of – USA/CIDAʼs A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furmanʼs SMP clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC – 3000 Amp surges! This unprecedented level of protection is only available with Furmanʼs SMP technology.

LiFT (Linear Filtering Technology)
Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furmanʼs SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.

E.V.S. (Extreme Voltage Shutdown)
Furmanʼs trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected.

Rear Panel BNC Connector
For rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold seperately).

Sequencing
The PS-PRO E II Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3- step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. A front panel screwdriver adjustment sets the delay time for the PS-PRO E II. The PS-PRO E II also features a locking switch with a removable key for maximum security. One or more Furman PS-PRO II’s may be installed in remote locations and operated via low-voltage wiring.

Features

  • SMP provides the highest level of protection available
  • LiFT significantly reduces AC line noise
  • E.V.S. protects equipment from dangerous overvoltage conditions
  • Zero ground contamination circuitry assures delivery of pure AC
  • Six sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel switched outlet
  • Momentary and Maintained sequencing via rear panel terminal block or front panel switch
  • 16 amp rating with circuit breaker
  • BNC connector on the rear panel allows you to attach any standard 12V gooseneck lamp to illuminate the rear of your rack
  • Three year limited warranty

SPECIFICATIONS:

Current rating: 16 amps
Operating Voltage: 180 to 280 VAC
Over Voltage Shutdown: 280 VAC typically
Spike Protection Modes: Line to neutral, zero ground leakage
Spike Clamping Voltage 376 VAC peak @ 3,000 Amps, 266 VAC RMS
(tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time: 1 nanosecond
Maximum surge current: 6,500 amps
Noise attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
Linear attenuation curve from 0.05 – 100 Ohms line impedance
Dimensions: 44.45mm H x 482.6mm W x 266.7mm D.
Weight: 5 kg.
Construction: Steel chassis, 3.175mm brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption: 6 watts
Safety Agency Listings: CE, NRTL-C
Βάρος 5.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “FURMAN PS-PRO E II POWER CONDITIONER/SEQUENCER”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

FURMAN PS-PRO E II POWER CONDITIONER/SEQUENCER removeFURMAN PL-8 C E POWER CONDITIONER removeFURMAN CLASSIC SERIES PL-PLUS C 9-OUTLET 10-AMP POWER CONDITIONER WITH VOLTMETER AND PULL-OUT LIGHTS removeFURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER removeFURMAN AC-210 A E Compact Linear AC Power Conditioner removeAdam Hall 87471 X7-way Out Power Strip 1U Switch Protection Cap remove
NameFURMAN PS-PRO E II POWER CONDITIONER/SEQUENCER removeFURMAN PL-8 C E POWER CONDITIONER removeFURMAN CLASSIC SERIES PL-PLUS C 9-OUTLET 10-AMP POWER CONDITIONER WITH VOLTMETER AND PULL-OUT LIGHTS removeFURMAN P1400AR-E VOLTAGE REGULATOR / POWER CONDITIONER removeFURMAN AC-210 A E Compact Linear AC Power Conditioner removeAdam Hall 87471 X7-way Out Power Strip 1U Switch Protection Cap remove
Image87471x7_power distributor 7way out switch quard-2
SKUPSPROEIIPL8CEPLPLUSCEP1400AREAC-210 A E87471X7
Rating
Price564.20 με ΦΠΑ 24%439.00 με ΦΠΑ 24%450.00 με ΦΠΑ 24%1,331.50 με ΦΠΑ 24%240.00 με ΦΠΑ 24% 43.39 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-PRO E II power conditioner / sequencer, featuring Furman's revolutionary SMP technology. Furman's Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) coupled with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOVs. Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressor.

SMP (Series Multi-Stage Protection Plus)
Furmanʼs SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furmanʼs SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.

Unique to Furmanʼs SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDAʼs A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furmanʼs SMP clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furmanʼs SMP technology.

LiFT (Linear Filtering Technology)
Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furmanʼs SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.

E.V.S. (Extreme Voltage Shutdown)
Furmanʼs trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected.

Rear Panel BNC Connector
For rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold seperately).

Sequencing
The PS-PRO E II Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3- step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. A front panel screwdriver adjustment sets the delay time for the PS-PRO E II. The PS-PRO E II also features a locking switch with a removable key for maximum security. One or more Furman PS-PRO II's may be installed in remote locations and operated via low-voltage wiring.

Features
  • SMP provides the highest level of protection available
  • LiFT significantly reduces AC line noise
  • E.V.S. protects equipment from dangerous overvoltage conditions
  • Zero ground contamination circuitry assures delivery of pure AC
  • Six sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel switched outlet
  • Momentary and Maintained sequencing via rear panel terminal block or front panel switch
  • 16 amp rating with circuit breaker
  • BNC connector on the rear panel allows you to attach any standard 12V gooseneck lamp to illuminate the rear of your rack
  • Three year limited warranty

SPECIFICATIONS:

Current rating:16 amps
Operating Voltage:180 to 280 VAC
Over Voltage Shutdown:280 VAC typically
Spike Protection Modes:Line to neutral, zero ground leakage
Spike Clamping Voltage376 VAC peak @ 3,000 Amps, 266 VAC RMS
(tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
Response time:1 nanosecond
Maximum surge current:6,500 amps
Noise attenuation:10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
Linear attenuation curve from 0.05 - 100 Ohms line impedance
Dimensions:44.45mm H x 482.6mm W x 266.7mm D.
Weight:5 kg.
Construction:Steel chassis, 3.175mm brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
Power consumption:6 watts
Safety Agency Listings:CE, NRTL-C

The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.

SPECIFICATIONS:

Maximum Output Current:10 amps
Line Cord:3/1.0MM AWG, 2.5M cord w/IEC female to 10A Schuko plug
Pull-out Lights:Two multi-LED, dimmable lamps
BNC Socket w/Switch:Rear rack lamp, 12VAC 500MA maxx (lamp not included)
Operating Voltage:180 to 274 VAC
Spike Protection Mode:Line to neutral, zero ground leakage
Spike Clamping Voltage:375 VAC peak @ 3,000 Amps
Response Time:1 nanosecond
Maximum Surge Current:6,500 Amps
Noise Attenuation:10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions:482.6mm W x 266.7mm D x 4.45mm H
Weight:6 kg.
Power Consumption:12 watts
Safety Listing:CE

 

The Furman PL-Plus C Power Conditioner protects your valuable equipment from mains power spikes and sags. Advanced Series Multi-Stage Protection Plus SMP+ circuit provides rock-solid, maintenance-free extreme surge suppression with zero ground contamination thanks to Furman Linear Filtering Technology LiFT. The Furman PL-Plus features 8 rear-panel AC mains outlets and one front-panel AC mains outlet, a 10-amp rating with circuit breaker, retractable LED rack lights with on/off/dimmer control, BNC back panel connector for gooseneck lamp with front-panel switch, and a segmented LED voltmeter to monitor and display incoming line voltage. The Furman PL-Plus C fits in one 19-inch rack space.

Traditional surge suppression circuits "sacrifice" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so withFurman SMP+. With the PL-PLUS C's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no maintananc, no down time.

Unique to the Furman PL-PLUS C's SMP+ is its clamping voltage. Other designs offer clamping voltages that are well above 375VAC peak, the Furman PL-PLUS C's SMP+ clamps at 375VAC peak, even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman's SMP+ technology.

The Furman PL-PLUS C features LED rack lights which produce virtually no heat and provide an extremely long life. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. The Furman PL- PLUS C includes a rear mounted BNC jack which accepts any standard 12VAC, 0.5A gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation

FURMAN PL-PLUS C E CLASSIC SERIES POWER CONDITIONER WITH VOLTMETER FEATURES

8 Rear-panel outlets and one front-panel outlet.
10-amp rating with circuit breaker.
Retractable LED rack lights with on/off/dimmer control.
BNC back panel connector for gooseneck lamp with front-panel switch.
Segmented LED voltmeter to monitor and display incoming line voltage.
Multi-stage protection.
Extreme voltage shutdown.
Linear filtering technology.

FURMAN PL-PLUS C CLASSIC SERIES POWER CONDITIONER SPECIFICATIONS
Maximum Output Current: 10 amps.
Pull-out Lights: Two multi-LED, dimmable lamps.
BNC Socket with Switch: Rear rack lamp, 12VAC 500mA maxx. Lamp not included.
Operating Voltage: 180 to 274 VAC.
Spike Protection Mode: Line to neutral, zero ground leakage.
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps.
Maximum Surge Current: 6,500 Amps.
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz.
Dimensions (mm, WxDxH): 482.6 x 266.7 x 4.45.
Weight: 6 kg.
Power Consumption: 12 watts.

The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage. The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.

Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furmanʼs Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts

SPECIFICATIONS:

Maximum Current: 6 amps
Line Cord: Captive AWG, 2.5M black cord with IEC Female to Schuko plug
BNC Socket w/Switch: 12VAC 500MA maxx (lamp not included)
Operating Voltage: 170 to 274 VAC
Over-Voltage Shutdown: 275 VAC Nominal
Approximate Input Voltage Capture Range: 174 to 264 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 375 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 12” D x 1.75” H (483mm W x 305mm D x 45mm H)
Weight: 7 kg.
Power Consumption: 5 watts

Power Conditioner με προστασίες SMP (Series Multi-Stage Protection Plus) για αποκοπή των spikes του ρεύματος και E.V.S (Extreme Voltage Shutdown) για τις απότομες αυξομειώσεις της τάσης.
Τεχνολογία LiFT (Linear Filtering Technology) για φιλτράρισμα από τους θορύβους.      AC Current Capactiy: 
Input - 10 Amp capacity required
Output - 10 Amps RMS (both outlets combined) 

Linear Noise Attenuation: 
> 40 dB @ 100 kHz.
>50 dB @ 500kHz
(Linear attenuation curve from 0.05 to 100 ohms line impedance) 

Transient Voltage Surge Suppression: 
230 VAC - Series Multi-Stage Protection
Non-Sacrificial with Zero Ground Contamination. 
376V peak clamping @ 6000V 3000A input
Extreme Voltage Shutdown (>135 VAC) 

Extreme Voltage Shutdown: 275 VAC (Auto-Reset) 

Dimensions: 1.75ʼ H x 5ʼ W x 8.5ʼ D 

Weight: 3 lbs. 

Safety Agency Listing: CE  

Adam Hall Cables 87471 X7

19" Power Strip 1U 7-way with switch & protection cap

  • Mountable Power Strip from our 19" PDU range
  • With recessed, illuminated switch and protective cap
  • 7 Schuko sockets rotated 45°
  • With 8-way adjustable mounting brackets
  • 1.4 m PVC cable with angled Schuko plug

The practical solution for your 19" rack. Our 87471 X7 with 8-way adjustable stable mounting ears and 7 Schuko sockets comes with a protective cap for the switch. This prevents the power distributor from being switched off accidentally. The cable routing on the side is supplied with a PVC cable (H05VV-F) with 3 x 1.5 mm² inner conductor and an angled Schuko plug.

Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
7, Rotated 45°
Power input
cables
Cable length
2 m
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium, Plastic
Color
Black
Width
482.6 mm
Height
45 mm
Depth
44.6 mm
Other features
Illuminated on / off switch with protective cap, Mounting brackets can be inserted in 8 positions
Weight
0,9 kg
Weight5.00 kg6.00 kg6.00 kg7.00 kg1.60 kg1 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 5.00 kg
Βάρος 6.00 kg
Βάρος 6.00 kg
Βάρος 7.00 kg
Βάρος 1.60 kg
Βάρος 1 kg