Content |
GENELEC ACTIVE LOUDSPEAKERS
Since its founding in 1978, the Finnish company Genelec has been known for its range of active monitor loudspeakers, featuring matched electronic-crossovers and individual amplifiers for each driver. Found in broadcast, recording and mastering studios worldwide, Genelec offer a range of monitors for all applications. The most popular types are detailed here, all other models are available to special order. Full brochures available on request.
Active Monitors 8020A
A bi-amplified, two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This, the smallest speaker in the Genelec range features features magnetic shielding, aluminium cabinet, active crossover and 2 x 20W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8020A units in total, with the lead control affecting level of the whole chain. Front-panel mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets or the supplied keyhole wall-mount adapter and a three eighths of an inch thread on the base for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8020Aʼs.
8030A
A two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This features magnetic shielding, aluminium cabinet, active crossover and 2 x 40W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8030A units in total, with the lead control affecting level of the whole chain. Front-panel mains switch, mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets and a three eighths of an inch thread for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8030Aʼs.
8040A
A bi-amplified two-way system for main and surround monitoring in small control rooms, OB vehicles and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, 2 x 90W amplifiers with overload protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 30.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8040Aʼs.
8050A
A bi-amplified two-way system for main and surround monitoring in medium-sized control rooms and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, two amplifiers with overload and thermal protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 60.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one 8050A.
Technical Specification:
| 8020A | 8030A | 8040A | 8050A |
---|
Lower cut-off | | | | | frequency: | 65Hz | 55Hz | 45Hz | 35Hz | Upper cut-off | | | | | frequency: | 21kHz | 21kHz | 21kHz | 21kHz | Max SPL @1m: | 105dB | 108dB | 115dB | 120dB | Amplifier power: | 20W/20W | 40W/40W | 90W/90W | 150W/120W | Input impedance: | 10k ohms | 10k ohms | 10k ohms | 10k ohms | Level for 100dB | | | | | SPL @1m: | mute to -6dBu | mute to -6dBu | -6 to +6dB | -6 to +6dB | Mains voltage (±10%): | 230V | 230V | 230V | 230V | | Power consumption: | | | | |
---|
idle: | 5VA | 10VA | 10VA | 10VA | full power: | 50VA | 80VA | 110VA | 170VA | Dimensions (w): | 151mm | 189mm | 237mm | 286mm | (h): | 230mm | 285mm | 350mm | 433mm | (h inc. IsoPod): | 242mm | 299mm | 365mm | 452mm | (d): | 142mm | 178mm | 223mm | 278mm | Weight: | 3.7kg | 5.7kg | 8.6kg | 12.7kg | Ordering note
Although the same floor stand applies to all 8000 series models of Genelec speakers, each model uses a unique stand plate to allow connection to the stand. Please ensure the correct stand plate is ordered for your model of 8020A, 8030A, 8040A or 8050A speaker.
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
The smallest big sound ever...
With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.
A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.
Stereolink
A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.
This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.
Controls and Connectors
The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.
Review: "Highly recommended"
"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)
Review: "...one of the best compact monitors"
"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)
Mid-Woofer |
| Number | 1 | Basket Ø | 4.5" (120 mm) | Voice coil Ø | 1" (25 mm) | Cone material | Carbon Fiber | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Mid-Woofer | 1 | Type | A/B | Amp. power RMS / music | 25 W / 40 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 25 W / 40 W | Control panel |
| Input Sensitivity | -∞ to +14 dB | Tweeter gain | ±4 dB | Input connectors |
| Analog | XLR / RCA | General data |
| Frequency response | 60 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.8 % | Long term output | ≥98 dB | Max. peak | ≥106 dB | Crossover frequencies | 2800 Hz | Input impedance | 10 KOhm | Weight | 10.1 lb (4,6 kg) | Magnetically shielded | No | Height x Width x Depth | 10" (252 mm) x 6" (150 mm) x 7.5" (185 mm) | Warranty | 5 Years | Delivery contents |
Cinch-cable, Power cord, Manual
|
|
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Acoustical Specifications |
---|
Frequency Response -3 dB: | 40 Hz | ÷ 20 kHz | Max SPL: | 114 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 70° | | Compression Driver: | 1" neo, metal dome | | Woofer: | 6.5" neo, ICC technology | |
INPUT/OUTPUT SECTION |
---|
Input connectors: | combo XLR/Jack | | Input sensitivity: | -6/+6 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1900 Hz | | Protections: | thermal, excurs., rms | | Limiter: | soft limiter | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
AMPLIFIER SPECIFICATIONS |
---|
High frequencies: | 100 Watts | | Low frequencies: | 200 Watts | | Cooling: | convection | | Connections: | vde | |
CABINET |
---|
Cabinet Material: | die cast aluminum | | Hardware: | orientation adjustable stand | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 370/14.5 mm/inch | | Width: | 265/10.4 mm/inch | | Depth: | 250/9.8 mm/inch | | Net Weight: | 10.5/23 Kg/Lbs |
|
Μonitor 2 δρόμων-2ενισχυτών near field, woofer 5.25? SFG?, tweeter 1"
τιτανίου προσαρμοσμένο σε eos waveguide, 100WRMS για LF and
50WRMS για HF, 70Ηz?20kΗz +1/-2dΒ, >109dB SPL peak. XLR, RCA
inputs. Δυνατότητα πολλαπλών ρυθμίσεων και συνεργασία με JBL RMC
calibration kit. Μαγνητική θωράκιση. 7,7kg., (173W x 269H x 241D mm).
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
The most powerful AX monitor
With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.
The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.
Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.
Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.
On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.
Review: A8X: a "powerful link" between near- and midfield monitors!
"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)
Mid-Woofer |
| Number | 1 | Basket Ø | 8.5" (220 mm) | Voice coil Ø | 1.5" (38 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 150 W / 225 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel |
| Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors |
| Analog | XLR / RCA | General data |
| Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥112 dB | Max. peak | ≥120 dB | Crossover frequencies | 2300 Hz | Input impedance | 30 KOhm | Weight | 28.7 lb (13 kg) | Magnetically shielded | No | Height x Width x Depth | 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
| Αυτοενισχυόμενα ηχεία monitor ισχύος 2 X 8 watts. Εφοδιάζονται με woofer 4” και tweeter 1,5”. Απόκριση συχνότητας 80-20000Hz. Είσοδοι line in σε RCA stereo & mini jack. Είσοδος mic σε jack 1/4 με ρύθμιση έντασης. Γενική ρύθμιση έντασης & bass/treble. Έξοδος ακουστικών σε mini jack. Βάρος 3,5 Kgr. (ΤΙΜΗ ΖΕΥΓΟΥΣ).
Κατασκευαστής |
BEHRINGER |
Τύπος Ηχείου |
Ενεργό |
Κατηγορία Ηχείου |
Studio Monitor |
Υλικό Κατασκευής |
Πλαστική Καμπίνα |
Χρώμα |
Μαύρο |
Βάρος (kg) |
3,5 |
Συνολική Ισχύς (Watt) |
16 |
Διάμετρος Woofer (inches) |
4 |
Tweeter / Driver (inches) |
1 |
Απόκριση συχνοτήτας (Hz) |
80-20000 |
Σειρά |
MS series |
Μοντέλο |
MS16 |
|
|
|
|
Behringer MS-16 2x8W 2-Way Active Personal Monitor System
The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.
Full Description
Compact and Ideal For Home Studio
The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.
Input Connections
The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.
Features
- Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
- Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
- Dedicated Volume, Bass and Treble controls for more flexibility
- Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
- Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
- 1/8'' TRS headphone connector with auto-mute loudspeaker function
- Magnetically shielded for placement near computer monitors
- Designed and engineered in Germany
Specifications
- Woofer: 4''
- Tweeter: 1.5''
- Output Power: 2 x 8 Watts
- Frequency Response: 80Hz - 20kHz
- Speaker Impedance: 4?
- Input 1:
- Connector: 1/8'' TRS Stereo
- Input Level: -10dBm, 10k?
- Input 2:
- Connector: RCA Stereo
- Input Level: -10dBm, 10k?
- Mic Input:
- Connector: 1/4'' TRS
- Input Level: -50dBm, 50?
- Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
- Weight: 4kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.